| AUTHBIND(1) | Debian Linux manual | AUTHBIND(1) |
authbind - bind sockets to privileged ports without root
authbind [options] program [argument ...]
authbind allows a program which does not or should not run as root to bind to low-numbered ports in a controlled way.
You must invoke the program using authbind. authbind will set up some environment variables, including an LD_PRELOAD, which will allow the program (including any subprocesses it may run) to bind to low-numbered (<512) ports if the system is configured to allow this.
Access to low numbered ports is controlled by permissions and contents of files in a configuration area, /etc/authbind.
Firstly, /etc/authbind/byport/port is tested. If this file is accessible for execution to the calling user, according to access(2), then binding to the port is authorised. If the file can be seen not to exist (the existence check returns ENOENT) then further tests will be used to find authorisation; otherwise, binding is not authorised, and the bind call will return with the errno value from the access(2) call, usually EACCES (Permission denied).
Secondly, if that test fails to resolve the matter, /etc/authbind/byaddr/addr,port (any protocol) or failing that /etc/authbind/byaddr/addr:port (IPv4 only) is tested, in the same manner as above. Here addr is as from inet_ntop, and port is the (local) TCP or UDP port number, expressed as an unsigned integer in the minimal non-zero number of digits.
Thirdly, for IPv6 only: since the textual representation from inet_ntop is complicated to predict, a variant of addr is also tested which does not use the double colon abbreviation: each 16-byte chunk expressed in the minimal nonzero number of hex digits (i.e. with leading zeroes removed), the chunks being separated by colons as is conventional.
Fourthly, if the question is still unresolved, the file /etc/authbind/byuid/uid will be opened and read. If the file does not exist then the binding is not authorised and bind will return EPERM (Operation not permitted, or Not owner). If the file does exist it will be searched for a line of the form
addrmin[-addrmax],portmin[-portmax] addr[/length],portmin[-portmax] addr4/length:portmin,portmaxmatching the request. The first form requires that the address lies in the relevant range (inclusive at both ends). The second and third forms require that the initial length bits of addr match those in the proposed bind call. The third form is only available for IPv4 since IPv6 addresses contain colons. Addresses in the byuid file can be in any form acceptable to inet_pton. In all cases the proposed port number must lie is in the inclusive range specified. If such a line is found then the binding is authorised. Otherwise it is not, and bind will fail with ENOENT (No such file or directory).
If a read error occurs, or the directory /etc/authbind cannot be accessed, then not only will bind fail, but an error message will be printed to stderr. Unrecognised lines in /etc/authbind/byuid/uid files are silently ignored, as are lines whose addr has non-zero bits more than length from the top or where some min is larger than max.
So for example an attempt by uid 432 to bind to port 80 of address [2620:106:e002:f00f::21] would result in authbind calling access(2) on, in order,
Authorising binding to ports from 512 to 1023 inclusive is not recommended. Some protocols (including some versions of NFS) authorise clients by seeing that they are using a port number in this range. So by authorising a program to be a server for such a port, you are also authorising it to impersonate the whole host for those protocols.
To make sure that this isn't done by accident, if the port number requested is in the range 512-1023, authbind will expect the permission files to have an additional ! at the start of their leafname.
The shared library loaded using LD_PRELOAD overrides the bind(2) system call. When a program invoked via authbind calls bind to bind a socket to a low-numbered TCP/IP port, and if the program doesn't already have an effective uid of 0, the version of bind supposed by authbind forks and executes a setuid-root helper program. For non-TCP/IP sockets, high-numbered ports, or programs which are already root, authbind passes the call to the original bind(2) system call, which is found using dlsym(3) with the handle RTLD_NEXT.
Usually the normal C error handling mechanisms apply. If authbind cannot find the program it has been asked to execute it will print a message to stderr and exit with code 255.
The helper program usually reports back to the shared library with an exit status containing an errno value which encodes whether the bind was permitted and successful. This will be returned to the calling program in the usual way.
In the case of apparent configuration or other serious errors the library and/or the helper program may cause messages to be printed to the program's stderr, was well as returning -1 from bind.
authbind currently only supports IPv4 and IPv6 sockets. Programs which open other kinds of sockets will not benefit from authbind, but it won't get in their way.
The use of LD_PRELOAD makes an authbind installation specific to a particular C library. This version is for GNU/Linux libc6 (glibc2).
authbind may not operate correctly with multithreaded programs. It is inherently very difficult (if not impossible) to perform the kind of trickery that authbind does while preventing all undesirable interactions between authbind's activities and those of (say) a threading runtime system.
It is quite possible that authbind and other programs and facilities which use LD_PRELOAD may interfere with each other, causing unpredictable behaviour or even core dumps. authbind is known sometimes not to work correctly with fakeroot, for example (even supposing it could be determined what `correctly' means in this context).
authbind is ineffective with setuid programs, because they do not honour LD_PRELOAD references outside the system directories, for security reasons. (In fact, setuid programs should not honour LD_PRELOAD at all.) Of course a setuid-root program does not need authbind, but it might be useful to apply it to program which are setuid to another user or setgid. If the author or builder of such a programs wishes it to use authbind they could have it load the libauthbind library explicitly rather than via LD_PRELOAD.
Some programs may have trouble because authbind spawns a child process `under their feet', causing (for example) a fork(2) to happen and SIGCHLD signal to be delivered. Unfortunately the Unix API does not make it possible to deal with this problem in a sane way.
The access control configuration scheme is somewhat strange.
authbind and this manpage were written by Ian Jackson. They are Copyright (C)1998,2012 by him and released under the GNU General Public Licence; there is NO WARRANTY. See /usr/doc/authbind/copyright and /usr/doc/copyright/GPL for details.
| 30th August 1998 | Debian Project |