BORG-CREATE(1) | borg backup tool | BORG-CREATE(1) |
borg-create - Create new archive
borg [common options] create [options] ARCHIVE [PATH...]
This command creates a backup archive containing all files found while recursively traversing all paths specified. Paths are added to the archive as they are given, that means if relative paths are desired, the command has to be run from the correct directory.
When giving '-' as path, borg will read data from standard input and create a file 'stdin' in the created archive from that data. In some cases it's more appropriate to use --content-from-command, however. See section Reading from stdin below for details.
The archive will consume almost no disk space for files or parts of files that have already been stored in other archives.
The archive name needs to be unique. It must not end in '.checkpoint' or '.checkpoint.N' (with N being a number), because these names are used for checkpoints and treated in special ways.
In the archive name, you may use the following placeholders: {now}, {utcnow}, {fqdn}, {hostname}, {user} and some others.
Backup speed is increased by not reprocessing files that are already part of existing archives and weren't modified. The detection of unmodified files is done by comparing multiple file metadata values with previous values kept in the files cache.
This comparison can operate in different modes as given by --files-cache:
inode number: better safety, but often unstable on network filesystems
Normally, detecting file modifications will take inode information into consideration to improve the reliability of file change detection. This is problematic for files located on sshfs and similar network file systems which do not provide stable inode numbers, such files will always be considered modified. You can use modes without inode in this case to improve performance, but reliability of change detection might be reduced.
ctime vs. mtime: safety vs. speed
The mount points of filesystems or filesystem snapshots should be the same for every creation of a new archive to ensure fast operation. This is because the file cache that is used to determine changed files quickly uses absolute filenames. If this is not possible, consider creating a bind mount to a stable location.
The --progress option shows (from left to right) Original, Compressed and Deduplicated (O, C and D, respectively), then the Number of files (N) processed so far, followed by the currently processed path.
When using --stats, you will get some statistics about how much data was added - the "This Archive" deduplicated size there is most interesting as that is how much your repository will grow. Please note that the "All archives" stats refer to the state after creation. Also, the --stats and --dry-run options are mutually exclusive because the data is not actually compressed and deduplicated during a dry run.
For more help on include/exclude patterns, see the borg_patterns command output.
For more help on placeholders, see the borg_placeholders command output.
See borg-common(1) for common options of Borg commands.
# Backup ~/Documents into an archive named "my-documents" $ borg create /path/to/repo::my-documents ~/Documents # same, but list all files as we process them $ borg create --list /path/to/repo::my-documents ~/Documents # Backup ~/Documents and ~/src but exclude pyc files $ borg create /path/to/repo::my-files \
~/Documents \
~/src \
--exclude '*.pyc' # Backup home directories excluding image thumbnails (i.e. only # /home/<one directory>/.thumbnails is excluded, not /home/*/*/.thumbnails etc.) $ borg create /path/to/repo::my-files /home \
--exclude 'sh:home/*/.thumbnails' # Backup the root filesystem into an archive named "root-YYYY-MM-DD" # use zlib compression (good, but slow) - default is lz4 (fast, low compression ratio) $ borg create -C zlib,6 --one-file-system /path/to/repo::root-{now:%Y-%m-%d} / # Backup onto a remote host ("push" style) via ssh to port 2222, # logging in as user "borg" and storing into /path/to/repo $ borg create ssh://borg@backup.example.org:2222/path/to/repo::{fqdn}-root-{now} / # Backup a remote host locally ("pull" style) using sshfs $ mkdir sshfs-mount $ sshfs root@example.com:/ sshfs-mount $ cd sshfs-mount $ borg create /path/to/repo::example.com-root-{now:%Y-%m-%d} . $ cd .. $ fusermount -u sshfs-mount # Make a big effort in fine granular deduplication (big chunk management # overhead, needs a lot of RAM and disk space, see formula in internals # docs - same parameters as borg < 1.0 or attic): $ borg create --chunker-params buzhash,10,23,16,4095 /path/to/repo::small /smallstuff # Backup a raw device (must not be active/in use/mounted at that time) $ borg create --read-special --chunker-params fixed,4194304 /path/to/repo::my-sdx /dev/sdX # Backup a sparse disk image (must not be active/in use/mounted at that time) $ borg create --sparse --chunker-params fixed,4194304 /path/to/repo::my-disk my-disk.raw # No compression (none) $ borg create --compression none /path/to/repo::arch ~ # Super fast, low compression (lz4, default) $ borg create /path/to/repo::arch ~ # Less fast, higher compression (zlib, N = 0..9) $ borg create --compression zlib,N /path/to/repo::arch ~ # Even slower, even higher compression (lzma, N = 0..9) $ borg create --compression lzma,N /path/to/repo::arch ~ # Only compress compressible data with lzma,N (N = 0..9) $ borg create --compression auto,lzma,N /path/to/repo::arch ~ # Use short hostname, user name and current time in archive name $ borg create /path/to/repo::{hostname}-{user}-{now} ~ # Similar, use the same datetime format that is default as of borg 1.1 $ borg create /path/to/repo::{hostname}-{user}-{now:%Y-%m-%dT%H:%M:%S} ~ # As above, but add nanoseconds $ borg create /path/to/repo::{hostname}-{user}-{now:%Y-%m-%dT%H:%M:%S.%f} ~ # Backing up relative paths by moving into the correct directory first $ cd /home/user/Documents # The root directory of the archive will be "projectA" $ borg create /path/to/repo::daily-projectA-{now:%Y-%m-%d} projectA # Use external command to determine files to archive # Use --paths-from-stdin with find to only backup files less than 1MB in size $ find ~ -size -1000k | borg create --paths-from-stdin /path/to/repo::small-files-only # Use --paths-from-command with find to only backup files from a given user $ borg create --paths-from-command /path/to/repo::joes-files -- find /srv/samba/shared -user joe # Use --paths-from-stdin with --paths-delimiter (for example, for filenames with newlines in them) $ find ~ -size -1000k -print0 | borg create \
--paths-from-stdin \
--paths-delimiter "\0" \
/path/to/repo::smallfiles-handle-newline
The --exclude patterns are not like tar. In tar --exclude .bundler/gems will exclude foo/.bundler/gems. In borg it will not, you need to use --exclude '*/.bundler/gems' to get the same effect.
In addition to using --exclude patterns, it is possible to use --exclude-if-present to specify the name of a filesystem object (e.g. a file or folder name) which, when contained within another folder, will prevent the containing folder from being backed up. By default, the containing folder and all of its contents will be omitted from the backup. If, however, you wish to only include the objects specified by --exclude-if-present in your backup, and not include any other contents of the containing folder, this can be enabled through using the --keep-exclude-tags option.
The -x or --one-file-system option excludes directories, that are mountpoints (and everything in them). It detects mountpoints by comparing the device number from the output of stat() of the directory and its parent directory. Specifically, it excludes directories for which stat() reports a device number different from the device number of their parent. Be aware that in Linux (and possibly elsewhere) there are directories with device number different from their parent, which the kernel does not consider a mountpoint and also the other way around. Examples are bind mounts (possibly same device number, but always a mountpoint) and ALL subvolumes of a btrfs (different device number from parent but not necessarily a mountpoint). Therefore when using --one-file-system, one should make doubly sure that the backup works as intended especially when using btrfs. This is even more important, if the btrfs layout was created by someone else, e.g. a distribution installer.
--list outputs a list of all files, directories and other file system items it considered (no matter whether they had content changes or not). For each item, it prefixes a single-letter flag that indicates type and/or status of the item.
If you are interested only in a subset of that output, you can give e.g. --filter=AME and it will only show regular files with A, M or E status (see below).
A uppercase character represents the status of a regular file relative to the "files" cache (not relative to the repo -- this is an issue if the files cache is not used). Metadata is stored in any case and for 'A' and 'M' also new data chunks are stored. For 'U' all data chunks refer to already existing chunks.
A lowercase character means a file type other than a regular file, borg usually just stores their metadata:
Other flags used include:
There are two methods to read from stdin. Either specify - as path and pipe directly to borg:
backup-vm --id myvm --stdout | borg create REPO::ARCHIVE -
Or use --content-from-command to have Borg manage the execution of the command and piping. If you do so, the first PATH argument is interpreted as command to execute and any further arguments are treated as arguments to the command:
borg create --content-from-command REPO::ARCHIVE -- backup-vm --id myvm --stdout
-- is used to ensure --id and --stdout are not considered arguments to borg but rather backup-vm.
The difference between the two approaches is that piping to borg creates an archive even if the command piping to borg exits with a failure. In this case, one can end up with truncated output being backed up. Using --content-from-command, in contrast, borg is guaranteed to fail without creating an archive should the command fail. The command is considered failed when it returned a non-zero exit code.
Reading from stdin yields just a stream of data without file metadata associated with it, and the files cache is not needed at all. So it is safe to disable it via --files-cache disabled and speed up backup creation a bit.
By default, the content read from stdin is stored in a file called 'stdin'. Use --stdin-name to change the name.
borg-common(1), borg-delete(1), borg-prune(1), borg-check(1), borg-patterns(1), borg-placeholders(1), borg-compression(1)
The Borg Collective
2023-03-22 |