cdist - Usable Configuration Management
cdist [-h] [-V] {banner,config,install,inventory,preos,shell,info} ...
cdist banner [-h] [-l LOGLEVEL] [-q] [-v]
cdist config [-h] [-l LOGLEVEL] [-q] [-v] [-b] [--colors WHEN]
[-g CONFIG_FILE] [-4] [-6] [-C CACHE_PATH_PATTERN]
[-c CONF_DIR] [-i MANIFEST] [-j [JOBS]] [--log-server]
[-n] [-o OUT_PATH] [-P] [-R [{tar,tgz,tbz2,txz}]]
[-r REMOTE_OUT_PATH] [--remote-copy REMOTE_COPY]
[--remote-exec REMOTE_EXEC] [-S] [-I INVENTORY_DIR] [-A]
[-a] [-f HOSTFILE] [-p [HOST_MAX]] [-s] [-t]
[host [host ...]]
cdist install [-h] [-l LOGLEVEL] [-q] [-v] [-b] [--colors WHEN]
[-g CONFIG_FILE] [-4] [-6] [-C CACHE_PATH_PATTERN]
[-c CONF_DIR] [-i MANIFEST] [-j [JOBS]] [--log-server]
[-n] [-o OUT_PATH] [-P] [-R [{tar,tgz,tbz2,txz}]]
[-r REMOTE_OUT_PATH] [--remote-copy REMOTE_COPY]
[--remote-exec REMOTE_EXEC] [-S] [-I INVENTORY_DIR] [-A]
[-a] [-f HOSTFILE] [-p [HOST_MAX]] [-s] [-t]
[host [host ...]]
cdist inventory [-h] {add-host,add-tag,del-host,del-tag,list} ...
cdist inventory add-host [-h] [-l LOGLEVEL] [-q] [-v] [-b] [--colors WHEN]
[-g CONFIG_FILE] [-I INVENTORY_DIR] [-f HOSTFILE]
[host [host ...]]
cdist inventory add-tag [-h] [-l LOGLEVEL] [-q] [-v] [-b] [--colors WHEN]
[-g CONFIG_FILE] [-I INVENTORY_DIR] [-f HOSTFILE]
[-T TAGFILE] [-t TAGLIST]
[host [host ...]]
cdist inventory del-host [-h] [-l LOGLEVEL] [-q] [-v] [-b] [--colors WHEN]
[-g CONFIG_FILE] [-I INVENTORY_DIR] [-a]
[-f HOSTFILE]
[host [host ...]]
cdist inventory del-tag [-h] [-l LOGLEVEL] [-q] [-v] [-b] [--colors WHEN]
[-g CONFIG_FILE] [-I INVENTORY_DIR] [-a]
[-f HOSTFILE] [-T TAGFILE] [-t TAGLIST]
[host [host ...]]
cdist inventory list [-h] [-l LOGLEVEL] [-q] [-v] [-b] [--colors WHEN]
[-g CONFIG_FILE] [-I INVENTORY_DIR] [-a] [-f HOSTFILE]
[-H] [-t]
[host [host ...]]
cdist preos [-h] [-l LOGLEVEL] [-q] [-v] [-c CONF_DIR] [-g CONFIG_FILE] [-L]
[preos] ...
cdist preos [preos-options] debian [-h] [-l LOGLEVEL] [-q] [-v] [-b] [-a ARCH] [-B]
[-C] [-c CDIST_PARAMS] [-D DRIVE] [-e REMOTE_EXEC]
[-i MANIFEST] [-k KEYFILE ] [-m MIRROR]
[-P ROOT_PASSWORD] [-p PXE_BOOT_DIR] [-r]
[-S SCRIPT] [-s SUITE] [-y REMOTE_COPY]
target_dir
cdist preos [preos-options] devuan [-h] [-l LOGLEVEL] [-q] [-v] [-b] [-a ARCH] [-B]
[-C] [-c CDIST_PARAMS] [-D DRIVE] [-e REMOTE_EXEC]
[-i MANIFEST] [-k KEYFILE ] [-m MIRROR]
[-P ROOT_PASSWORD] [-p PXE_BOOT_DIR] [-r]
[-S SCRIPT] [-s SUITE] [-y REMOTE_COPY]
target_dir
cdist preos [preos-options] ubuntu [-h] [-l LOGLEVEL] [-q] [-v] [-b] [-a ARCH] [-B]
[-C] [-c CDIST_PARAMS] [-D DRIVE] [-e REMOTE_EXEC]
[-i MANIFEST] [-k KEYFILE ] [-m MIRROR]
[-P ROOT_PASSWORD] [-p PXE_BOOT_DIR] [-r]
[-S SCRIPT] [-s SUITE] [-y REMOTE_COPY]
target_dir
cdist shell [-h] [-l LOGLEVEL] [-q] [-v] [--colors WHEN] [-s SHELL]
cdist info [-h] [-a] [-c CONF_DIR] [-e] [-F] [-f] [-g CONFIG_FILE] [-t]
[pattern]
cdist scan -I INTERFACE [--m MODE] [--name-mapper PATH_TO_SCRIPT] [--list]
[-d CONFIG_DELAY] [-t TRIGGER_DELAY]
cdist is the frontend executable to the cdist configuration
management. It supports different subcommands as explained below.
It is written in Python so it requires python(1) to be
installed. It requires a minimal Python version 3.5.
All commands accept the following options:
- -h, --help
- Show the help screen.
- --colors
WHEN
- Colorize cdist's output. If enabled, cdist will use different colors for
different log levels. WHEN recognizes the values 'always', 'never', and
'auto' (the default).
If the value is 'auto', colored output is enabled if stdout is
a TTY unless the NO_COLOR (https://no-color.org/) environment
variable is defined.
- -l LOGLEVEL, --log-level
LOGLEVEL
- Set the specified verbosity level. The levels, in order from the lowest to
the highest, are: ERROR (-1), WARNING (0), INFO (1), VERBOSE (2), DEBUG
(3), TRACE (4 or higher). If used along with -v then -v increases last set
value and -l overwrites last set value.
- -q, --quiet
- Quiet mode: disables logging, including WARNING and ERROR.
- -v, --verbose
- Increase the verbosity level. Every instance of -v increments the
verbosity level by one. Its default value is 0 which includes ERROR and
WARNING levels. The levels, in order from the lowest to the highest, are:
ERROR (-1), WARNING (0), INFO (1), VERBOSE (2), DEBUG (3), TRACE (4 or
higher). If used along with -l then -l overwrites last set value and -v
increases last set value.
- -V, --version
- Show version and exit.
Displays the cdist banner. Useful for printing cdist posters - a
must have for every office.
Configure/install one or more hosts. Install command is currently
in beta.
- -4, --force-ipv4
- Force to use IPv4 addresses only. No influence for custom remote
commands.
- -6, --force-ipv6
- Force to use IPv6 addresses only. No influence for custom remote
commands.
- -A, --all-tagged
- Use all hosts present in tags db. Currently in beta.
- -a, --all
- List hosts that have all specified tags, if -t/--tag is specified.
- -b, --beta
- Enable beta functionality.
- -C CACHE_PATH_PATTERN,
--cache-path-pattern CACHE_PATH_PATTERN
- Specify custom cache path pattern. If it is not set then default hostdir
is used. For more info on format see CACHE PATH PATTERN FORMAT
below.
- -c CONF_DIR, --conf-dir
CONF_DIR
- Add a configuration directory. Can be specified multiple times. If
configuration directories contain conflicting types, explorers or
manifests, then the last one found is used.
- -f HOSTFILE, --file
HOSTFILE
- Read specified file for a list of additional hosts to operate on or if '-'
is given, read stdin (one host per line). For the file format see
HOSTFILE FORMAT below.
- -g CONFIG_FILE, --config-file
CONFIG_FILE
- Use specified custom configuration file.
- -I INVENTORY_DIR, --inventory
INVENTORY_DIR
- Use specified custom inventory directory. Inventory directory is set up by
the following rules: if cdist configuration resolves this value then
specified directory is used, if HOME env var is set then ~/.cdit/inventory
is used, otherwise distribution inventory directory is used.
- -i MANIFEST, --initial-manifest
MANIFEST
- Path to a cdist manifest or - to read from stdin.
- -j [JOBS], --jobs
[JOBS]
- Operate in parallel in specified maximum number of jobs. Global explorers,
object prepare and object run are supported. Without argument CPU count is
used by default.
- --log-server
- Start a log server for sub processes to use. This is mainly useful when
running cdist nested from a code- local script. Log server is always
implicitly started for 'install' command.
- -n, --dry-run
- Do not execute code.
- -o OUT_PATH, --out-dir
OUT_PATH
- Directory to save cdist output in.
- -P, --timestamp
- Timestamp log messages with the current local date and time in the format:
YYYYMMDDHHMMSS.us.
- -p [HOST_MAX], --parallel
[HOST_MAX]
- Operate on multiple hosts in parallel for specified maximum hosts at a
time. Without argument CPU count is used by default.
- -R [{tar,tgz,tbz2,txz}],
--use-archiving [{tar,tgz,tbz2,txz}]
- Operate by using archiving with compression where appropriate. Supported
values are: tar - tar archive, tgz - gzip tar archive (the default), tbz2
- bzip2 tar archive and txz - lzma tar archive. Currently in beta.
- -r REMOTE_OUT_PATH,
--remote-out-dir REMOTE_OUT_PATH
- Directory to save cdist output in on the target host.
- -S,
--disable-saving-output-streams
- Disable saving output streams.
- -s, --sequential
- Operate on multiple hosts sequentially (default).
- --remote-copy
REMOTE_COPY
- Command to use for remote copy (should behave like scp).
- --remote-exec
REMOTE_EXEC
- Command to use for remote execution (should behave like ssh).
- -t, --tag
- Host is specified by tag, not hostname/address; list all hosts that
contain any of specified tags. Currently in beta.
The HOSTFILE contains one host per line. A comment is started with
'#' and continues to the end of the line. Any leading and trailing
whitespace on a line is ignored. Empty lines are ignored/skipped.
The Hostfile lines are processed as follows. First, all comments
are removed. Then all leading and trailing whitespace characters are
stripped. If such a line results in empty line it is ignored/skipped.
Otherwise, host string is used.
Cache path pattern specifies path for a cache directory
subdirectory. In the path, '%N' will be substituted by the target host, '%h'
will be substituted by the calculated host directory, '%P' will be
substituted by the current process id. All format codes that python
datetime.strftime() function supports, except '%h', are supported.
These date/time directives format cdist config/install start time.
If empty pattern is specified then default calculated host
directory is used.
Calculated host directory is a hash of a host cdist operates
on.
Resulting path is used to specify cache path subdirectory under
which current host cache data are saved.
Manage inventory database. Currently in beta with all
sub-commands.
Add host(s) to inventory database.
- host
- Host(s) to add.
- -b, --beta
- Enable beta functionality.
- -f HOSTFILE, --file
HOSTFILE
- Read additional hosts to add from specified file or from stdin if '-'
(each host on separate line). Hostfile format is the same as config
hostfile format.
- -g CONFIG_FILE, --config-file
CONFIG_FILE
- Use specified custom configuration file.
- -I INVENTORY_DIR, --inventory
INVENTORY_DIR
- Use specified custom inventory directory. Inventory directory is set up by
the following rules: if cdist configuration resolves this value then
specified directory is used, if HOME env var is set then ~/.cdit/inventory
is used, otherwise distribution inventory directory is used.
Add tag(s) to inventory database.
- host
- List of host(s) for which tags are added.
- -b, --beta
- Enable beta functionality.
- -f HOSTFILE, --file
HOSTFILE
- Read additional hosts to add tags from specified file or from stdin if '-'
(each host on separate line). Hostfile format is the same as config
hostfile format.
- -g CONFIG_FILE, --config-file
CONFIG_FILE
- Use specified custom configuration file.
- -I INVENTORY_DIR, --inventory
INVENTORY_DIR
- Use specified custom inventory directory. Inventory directory is set up by
the following rules: if cdist configuration resolves this value then
specified directory is used, if HOME env var is set then ~/.cdit/inventory
is used, otherwise distribution inventory directory is used.
- -T TAGFILE, --tag-file
TAGFILE
- Read additional tags to add from specified file or from stdin if '-' (each
tag on separate line). Tagfile format is the same as config hostfile
format.
- -t TAGLIST, --taglist
TAGLIST
- Tag list to be added for specified host(s), comma separated values.
Delete host(s) from inventory database.
- host
- Host(s) to delete.
- -a, --all
- Delete all hosts.
- -b, --beta
- Enable beta functionality.
- -f HOSTFILE, --file
HOSTFILE
- Read additional hosts to delete from specified file or from stdin if '-'
(each host on separate line). Hostfile format is the same as config
hostfile format.
- -g CONFIG_FILE, --config-file
CONFIG_FILE
- Use specified custom configuration file.
- -I INVENTORY_DIR, --inventory
INVENTORY_DIR
- Use specified custom inventory directory. Inventory directory is set up by
the following rules: if cdist configuration resolves this value then
specified directory is used, if HOME env var is set then ~/.cdit/inventory
is used, otherwise distribution inventory directory is used.
Delete tag(s) from inventory database.
- host
- List of host(s) for which tags are deleted.
- -a, --all
- Delete all tags for specified host(s).
- -b, --beta
- Enable beta functionality.
- -f HOSTFILE, --file
HOSTFILE
- Read additional hosts to delete tags for from specified file or from stdin
if '-' (each host on separate line). Hostfile format is the same as config
hostfile format.
- -g CONFIG_FILE, --config-file
CONFIG_FILE
- Use specified custom configuration file.
- -I INVENTORY_DIR, --inventory
INVENTORY_DIR
- Use specified custom inventory directory. Inventory directory is set up by
the following rules: if cdist configuration resolves this value then
specified directory is used, if HOME env var is set then ~/.cdit/inventory
is used, otherwise distribution inventory directory is used.
- -T TAGFILE, --tag-file
TAGFILE
- Read additional tags from specified file or from stdin if '-' (each tag on
separate line). Tagfile format is the same as config hostfile format.
- -t TAGLIST, --taglist
TAGLIST
- Tag list to be deleted for specified host(s), comma separated values.
List inventory database.
- host
- Host(s) to list.
- -a, --all
- List hosts that have all specified tags, if -t/--tag is specified.
- -b, --beta
- Enable beta functionality.
- -f HOSTFILE, --file
HOSTFILE
- Read additional hosts to list from specified file or from stdin if '-'
(each host on separate line). If no host or host file is specified then,
by default, list all. Hostfile format is the same as config hostfile
format.
- -g CONFIG_FILE, --config-file
CONFIG_FILE
- Use specified custom configuration file.
- -H, --host-only
- Suppress tags listing.
- -I INVENTORY_DIR, --inventory
INVENTORY_DIR
- Use specified custom inventory directory. Inventory directory is set up by
the following rules: if cdist configuration resolves this value then
specified directory is used, if HOME env var is set then ~/.cdit/inventory
is used, otherwise distribution inventory directory is used.
- -t, --tag
- Host is specified by tag, not hostname/address; list all hosts that
contain any of specified tags.
Create PreOS.
Currently, the following PreOS-es are supported:
- target_dir
- target directory where PreOS will be bootstrapped
- -a ARCH, --arch ARCH
- target debootstrap architecture, by default 'amd64'
- -B, --bootstrap
- do bootstrap step
- -b, --beta
- Enable beta functionality.
- -C, --configure
- do configure step
- -c CDIST_PARAMS,
--cdist-params CDIST_PARAMS
- parameters that will be passed to cdist config, by default '-v' is
used
- -D DRIVE, --drive-boot
DRIVE
- create bootable PreOS on specified drive
- -e REMOTE_EXEC, --remote-exec
REMOTE_EXEC
- remote exec that cdist config will use, by default internal script is
used
- -i MANIFEST, --init-manifest
MANIFEST
- init manifest that cdist config will use, by default internal init
manifest is used
- -k KEYFILE, --keyfile
KEYFILE
- ssh key files that will be added to cdist config;
'__ssh_authorized_keys root ...' type is appended to initial
manifest
- -m MIRROR, --mirror
MIRROR
- use specified mirror for debootstrap
- -P ROOT_PASSWORD, --root-password
ROOT_PASSWORD
- Set specified password for root, generated by default
- -p PXE_BOOT_DIR,
--pxe-boot-dir PXE_BOOT_DIR
- PXE boot directory
- -r,
--rm-bootstrap-dir
- remove target directory after finishing
- -S SCRIPT, --script
SCRIPT
- use specified script for debootstrap
- -s SUITE, --suite
SUITE
- suite used for debootstrap, by default 'stable'
- -y REMOTE_COPY, --remote-copy
REMOTE_COPY
- remote copy that cdist config will use, by default internal script is
used
- target_dir
- target directory where PreOS will be bootstrapped
- -a ARCH, --arch
ARCH
- target debootstrap architecture, by default 'amd64'
- -B,
--bootstrap
- do bootstrap step
- -b, --beta
- Enable beta functionality.
- -C,
--configure
- do configure step
- -c CDIST_PARAMS,
--cdist-params CDIST_PARAMS
- parameters that will be passed to cdist config, by default '-v' is
used
- -D DRIVE, --drive-boot
DRIVE
- create bootable PreOS on specified drive
- -e REMOTE_EXEC, --remote-exec
REMOTE_EXEC
- remote exec that cdist config will use, by default internal script is
used
- -i MANIFEST, --init-manifest
MANIFEST
- init manifest that cdist config will use, by default internal init
manifest is used
- -k KEYFILE, --keyfile
KEYFILE
- ssh key files that will be added to cdist config;
'__ssh_authorized_keys root ...' type is appended to initial
manifest
- -m MIRROR, --mirror
MIRROR
- use specified mirror for debootstrap
- -P ROOT_PASSWORD,
--root-password ROOT_PASSWORD
- Set specified password for root, generated by default
- -p PXE_BOOT_DIR,
--pxe-boot-dir PXE_BOOT_DIR
- PXE boot directory
- -r,
--rm-bootstrap-dir
- remove target directory after finishing
- -S SCRIPT, --script
SCRIPT
- use specified script for debootstrap
- -s SUITE, --suite
SUITE
- suite used for debootstrap, by default 'xenial'
- -y REMOTE_COPY, --remote-copy
REMOTE_COPY
- remote copy that cdist config will use, by default internal script is
used
This command allows you to spawn a shell that enables access to
the types as commands. It can be thought as an "interactive
manifest" environment. See below for example usage. Its primary use is
for debugging type parameters.
- -s SHELL, --shell
SHELL
- Select shell to use, defaults to current shell. Used shell should be POSIX
compatible shell.
Display information for cdist (global explorers, types).
- pattern
- Glob pattern. If it contains special characters('?', '*', '[') then it is
used as specified, otherwise it is translated to *pattern*.
- -h, --help
- Show help message and exit.
- -a, --all
- Display all info. This is the default.
- -c CONF_DIR, --conf-dir
CONF_DIR
- Add configuration directory (can be repeated).
- -e,
--global-explorers
- Display info for global explorers.
- -F, --fixed-string
- Interpret pattern as a fixed string.
- -f, --full
- Display full details.
- -g CONFIG_FILE, --config-file
CONFIG_FILE
- Use specified custom configuration file.
- -t, --types
- Display info for types.
Runs cdist as a daemon that discover/watch on hosts and
reconfigure them periodically.
cdist obtains configuration data from the following sources in the
following order (from higher to lower precedence):
- 1.
- command-line options
- 2.
- configuration file specified at command-line
- 3.
- configuration file specified in CDIST_CONFIG_FILE environment
variable
- 4.
- environment variables
- 5.
- user's configuration file (first one found of ~/.cdist.cfg,
$XDG_CONFIG_HOME/cdist/cdist.cfg, in specified order)
- 6.
- system-wide configuration file (/etc/cdist.cfg).
cdist configuration file is in the INI file format. Currently it
supports only [GLOBAL] section. The possible keywords and their meanings are
as follows:
- archiving
- Use specified archiving. Valid values include: 'none', 'tar', 'tgz',
'tbz2' and 'txz'.
- beta
- Enable beta functionality. It recognizes boolean values from 'yes'/'no',
'on'/'off', 'true'/'false' and '1'/'0'.
- cache_path_pattern
- Specify cache path pattern.
- colored_output
- Colorize cdist's output. cf. the --colors option.
- conf_dir
- List of configuration directories separated with the character
conventionally used by the operating system to separate search path
components (as in PATH), such as ':' for POSIX or ';' for Windows. If also
specified at command line then values from command line are appended to
this value.
- init_manifest
- Specify default initial manifest.
- inventory_dir
- Specify inventory directory.
- jobs
- Specify number of jobs for parallel processing. If -1 then the default,
number of CPU's in the system is used. If 0 then parallel processing in
jobs is disabled. If set to positive number then specified maximum number
of processes will be used.
- local_shell
- Shell command used for local execution.
- out_path
- Directory to save cdist output in.
- parallel
- Process hosts in parallel. If -1 then the default, number of CPU's in the
system is used. If 0 then parallel processing of hosts is disabled. If set
to positive number then specified maximum number of processes will be
used.
- remote_copy
- Command to use for remote copy (should behave like scp).
- remote_exec
- Command to use for remote execution (should behave like ssh).
- remote_out_path
- Directory to save cdist output in on the target host.
- remote_shell
- Shell command at remote host used for remote execution.
- save_output_streams
- Enable/disable saving output streams (enabled by default). It recognizes
boolean values from 'yes'/'no', 'on'/'off', 'true'/'false' and
'1'/'0'.
- timestamp
- Timestamp log messages with the current local date and time in the format:
YYYYMMDDHHMMSS.us.
- verbosity
- Set verbosity level. Valid values are: 'ERROR', 'WARNING', 'INFO',
'VERBOSE', 'DEBUG', 'TRACE' and 'OFF'.
- ~/.cdist
- Your personal cdist config directory. If exists it will be automatically
used.
- ~/.cdist/cache
- Local cache directory.
- ~/.cdist/inventory
- The home inventory directory. If ~/.cdist exists it will be used as
default inventory directory.
- ~/.cdist/preos
- PreOS plugins directory, if existing.
- cdist/conf
- The distribution configuration directory. It contains official types and
explorers. This path is relative to cdist installation directory.
- cdist/inventory
- The distribution inventory directory. This path is relative to cdist
installation directory.
- cdist/preos
- The distribution PreOS plugins directory.
- /etc/cdist.cfg
- Global cdist configuration file, if exists.
- ~/.cdist.cfg or $XDG_CONFIG_HOME/cdist/cdist.cfg
- Local cdist configuration file, if exists.
cdist detects if host is specified by IPv6 address. If so then
remote_copy command is executed with host address enclosed in square
brackets (see scp(1)).
# Configure ikq05.ethz.ch with debug enabled
% cdist config -vvv ikq05.ethz.ch
# Configure hosts in parallel and use a different configuration directory
% cdist config -c ~/p/cdist-nutzung \
-p ikq02.ethz.ch ikq03.ethz.ch ikq04.ethz.ch
# Use custom remote exec / copy commands
% cdist config --remote-exec /path/to/my/remote/exec \
--remote-copy /path/to/my/remote/copy \
-p ikq02.ethz.ch ikq03.ethz.ch ikq04.ethz.ch
# Configure hosts read from file loadbalancers
% cdist config -f loadbalancers
# Configure hosts read from file web.hosts using 16 parallel jobs
% cdist config -j 16 -f web.hosts
# Display banner
cdist banner
# Show help
% cdist --help
# Show Version
% cdist --version
# Enter a shell that has access to emulated types
% cdist shell
% __git
usage: __git --source SOURCE [--state STATE] [--branch BRANCH]
[--group GROUP] [--owner OWNER] [--mode MODE] object_id
# Install ikq05.ethz.ch with debug enabled
% cdist install -vvv ikq05.ethz.ch
# List inventory content
% cdist inventory list -b
# List inventory for specified host localhost
% cdist inventory list -b localhost
# List inventory for specified tag loadbalancer
% cdist inventory list -b -t loadbalancer
# Add hosts to inventory
% cdist inventory add-host -b web1 web2 web3
# Delete hosts from file old-hosts from inventory
% cdist inventory del-host -b -f old-hosts
# Add tags to specified hosts
% cdist inventory add-tag -b -t europe,croatia,web,static web1 web2
# Add tag to all hosts in inventory
% cdist inventory add-tag -b -t vm
# Delete all tags from specified host
% cdist inventory del-tag -b -a localhost
# Delete tags read from stdin from hosts specified by file hosts
% cdist inventory del-tag -b -T - -f hosts
# Configure hosts from inventory with any of specified tags
% cdist config -b -t web dynamic
# Configure hosts from inventory with all specified tags
% cdist config -b -t -a web dynamic
# Configure all hosts from inventory db
$ cdist config -b -A
# Create default debian PreOS in debug mode
$ cdist preos debian /preos/preos-debian -vvvv -C \
-k ~/.ssh/id_rsa.pub -p /preos/pxe-debian
# Create ubuntu PreOS
$ cdist preos ubuntu /preos/preos-ubuntu -C \
-k ~/.ssh/id_rsa.pub -p /preos/pxe-ubuntu
# Create ubuntu PreOS on drive /dev/sdb
# and set root password to 'password'.
$ cdist preos ubuntu /mnt -B -C \
-k ~/.ssh/id_rsa.pub -D /dev/sdb \
-P password
The following exit values shall be returned:
0 Successful completion.
1 One or more host configurations failed.
Originally written by Nico Schottelius
<nico-cdist--@--schottelius.org> and Steven Armstrong
<steven-cdist--@--armstrong.cc>.
When operating in parallel, either by operating in parallel for
each host (-p/--parallel) or by parallel jobs within a host (-j/--jobs), and
depending on target SSH server and its configuration you may encounter
connection drops. This is controlled with sshd MaxStartups
configuration options. You may also encounter session open refusal. This
happens with ssh multiplexing when you reach maximum number of open sessions
permitted per network connection. In this case ssh will disable
multiplexing. This limit is controlled with sshd MaxSessions
configuration options. For more details refer to sshd_config(5).
When requirements for the same object are defined in different
manifests (see example below), for example, in init manifest and in some
other type manifest and those requirements differ then dependency resolver
cannot detect dependencies correctly. This happens because cdist cannot
prepare all objects first and run all objects afterwards. Some object can
depend on the result of type explorer(s) and explorers are executed during
object run. cdist will detect such case and display a warning message. An
example of such a case:
init manifest:
__a a
require="__e/e" __b b
require="__f/f" __c c
__e e
__f f
require="__c/c" __d d
__g g
__h h
type __g manifest:
require="__c/c __d/d" __a a
Warning message:
WARNING: cdisttesthost: Object __a/a already exists with requirements:
/usr/home/darko/ungleich/cdist/cdist/test/config/fixtures/manifest/init-deps-resolver /tmp/tmp.cdist.test.ozagkg54/local/759547ff4356de6e3d9e08522b0d0807/data/conf/type/__g/manifest: set()
/tmp/tmp.cdist.test.ozagkg54/local/759547ff4356de6e3d9e08522b0d0807/data/conf/type/__g/manifest: {'__c/c', '__d/d'}
Dependency resolver could not handle dependencies as expected.
Copyright (C) 2011-2020 Nico Schottelius. Free use of this
software is granted under the terms of the GNU General Public License v3 or
later (GPLv3+).