inteltool - a tool for dumping Intel(R) CPU / chipset
configuration parameters
inteltool [-vh?gGrpmedPMaAsfS]
inteltool is a handy little tool for dumping the
configuration space of Intel(R) CPUs, northbridges and southbridges.
This tool has been developed for the coreboot project (see
https://coreboot.org for details on coreboot).
- -h, --help
- Show a help text and exit.
- -v, --version
- Show version information and exit.
- -a, --all
- Dump all known information listed below.
- -g, --gpio
- Dump I/O Controller Hub (ICH) southbridge GPIO registers.
- -G, --gpio-diffs
- Show only GPIO register differences from hardware defaults.
- -r, --rcba
- Dump I/O Controller Hub (ICH) southbridge RCBA registers.
- -s, --spi
- Dump I/O Controller Hub (ICH) southbridge SPI registers and BIOS
control.
- -f, --gfx
- Dump graphics registers. Due to unknown reasons this might lock up some
systems after a few seconds.
- -p, --pmbase
- Dump I/O Controller Hub (ICH) southbridge PMBASE registers.
- -m, --mchbar
- Dump Intel(R) northbridge MCHBAR registers.
- -S file,
--spd=file
- Dump the memory registers as above and store the current timing settings
into file.
- -e, --epbar
- Dump Intel(R) northbridge EPBAR registers.
- -d, --dmibar
- Dump Intel(R) northbridge DMIBAR registers.
- -P, --pciexbar
- Dump Intel(R) northbridge PCIEXBAR registers.
- -M, --msrs
- Dump Intel(R) CPU MSRs.
- -A, --ambs
- Dump Advanced Memory Buffer (AMB) registers.
Please report any bugs on the coreboot mailing list
(https://coreboot.org/Mailinglist).
inteltool is covered by the GNU General Public License
(GPL), version 2.
Copyright (C) 2008 coresystems GmbH
Stefan Reinauer <stepan@coresystems.de>
This manual page was written by Stefan Reinauer
<stepan@coresystems.de>. It is licensed under the terms of the GNU GPL
(version 2).
Intel(R) is a registered trademark of Intel Corporation. Other
product and/or company names mentioned herein may be trademarks or
registered trademarks of their respective owners.