DOKK / manpages / debian 12 / erlang-manpages / OTP-SNMPEA-MIB.7.en
OTP-SNMPEA-MIB(7) MIB OTP-SNMPEA-MIB(7)

OTP-SNMPEA-MIB - The Erlang/OTP MIB module for the SNMPEA component in OTP

OTP-SNMPEA-MIB DEFINITIONS ::= BEGIN
IMPORTS

MODULE-IDENTITY, OBJECT-TYPE,
Integer32, IpAddress
FROM SNMPv2-SMI
DisplayString, RowStatus, StorageType
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
otpModules, otpApplications
FROM OTP-REG
; otpSnmpeaModule MODULE-IDENTITY
LAST-UPDATED "0305130000Z"
ORGANIZATION "Ericsson"
CONTACT-INFO
"Contact: Erlang Support see license agreement for Erlang/OTP."
DESCRIPTION
"This MIB module defines MIB objects for the SNMPEA
component in OTP."
REVISION "0305130000Z"
DESCRIPTION
"Changed CONTACT-INFO as it was outdated, made it more generic to avoid such changes in the future."
REVISION "9808280000Z"
DESCRIPTION
"Since there are standard MIBs in the SNMPv3 framework that
implements the functionality defined in this MIB, all objects in
this MIB is now obsolete. There are still a few OID assignments
defined in this MIB.
Removed intCommunityTable; replaced by snmpCommunityTable in
SNMP-COMMUNITY-MIB.
Removed intAddressTable; replaced by SNMP-TARGET-MIB. Removed intAgentMaxPacketSize, replaced by snmpEngineMaxPacketSize
in SNMP-FRAMEWORK-MIB.
Removed intAgentIpAddress and intAgentUDPPort.
Removed intViewTable, replaced by SNMP-VIEW-BASED-ACM-MIB."
REVISION "9804160000Z"
DESCRIPTION
"Updated to support MIBs from SNMPv3. Since SNMPv3 standardizes
some of the functionality provided by this MIB, we're using the
standard instead.
Removed intTrapDestTable; replaced by SNMP-TARGET-MIB and SNMP-NOTIFICATION-MIB."
REVISION "9709220900Z"
DESCRIPTION
"The initial version of this MIB module. It is the old
INTERNAL-MIB renamed."
::= { otpModules 5 } otpSnmpeaMIB OBJECT IDENTIFIER ::= { otpApplications 3 } otpSnmpeaMIBConformance
OBJECT IDENTIFIER ::= { otpSnmpeaMIB 1 } otpSnmpeaMIBObjects
OBJECT IDENTIFIER ::= { otpSnmpeaMIB 2 } snmpeaAdm OBJECT IDENTIFIER ::= { otpSnmpeaMIBObjects 1} community OBJECT IDENTIFIER ::= { snmpeaAdm 1 } trap OBJECT IDENTIFIER ::= { snmpeaAdm 2 } view OBJECT IDENTIFIER ::= { snmpeaAdm 3 } -- Obsolete objects -- The Administration Group -- -- This group consists of objects to configure the access for -- managers to the MIB tree. -- -- These objects were previously defined in INTERNAL-MIB intCommunityTable OBJECT-TYPE
SYNTAX SEQUENCE OF IntCommunityEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This table defines access for the different
communities.
When a request comes from a certain ip address,
referring to a community string, the mib view
and access corresponding to these are looked up
in this table. Then the operation is validatated against
the access, and all requested objects validated against
the mib view."
::= { community 1 } intCommunityEntry OBJECT-TYPE
SYNTAX IntCommunityEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
""
INDEX { intCommunityDestination, intCommunityString }
::= { intCommunityTable 1 } IntCommunityEntry ::=
SEQUENCE {
intCommunityDestination IpAddress,
intCommunityString DisplayString,
intCommunityViewIndex Integer32,
intCommunityAccess INTEGER,
intCommunityStatus RowStatus
} intCommunityDestination OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The ip address of a management station. The special
ip address {0.0.0.0} is a wildcard, meaning all possible
ip addresses. In this way, access can be granted to all
ip addressed for some communities."
::= { intCommunityEntry 1 } intCommunityString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The community string, defining the community."
::= { intCommunityEntry 2 } intCommunityViewIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Identifies a mib view. Index into the
intViewTable."
::= { intCommunityEntry 3 } intCommunityAccess OBJECT-TYPE
SYNTAX INTEGER { read(1), readWrite(2) }
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Defines which operations the manager can perform
on the objects in the mib view."
::= { intCommunityEntry 4 } intCommunityStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The status of this conceptual row in the
intCommunityTable."
::= { intCommunityEntry 5 } intAgentIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The IP address of this agent."
::= { community 2 } intAgentUDPPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The UDP port the agent listens to."
::= { community 3 } intAgentMaxPacketSize OBJECT-TYPE
SYNTAX Integer32 (484..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The maximum packet size in bytes this agent will send to a
manager."
::= { community 4 } intAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF IntAddressEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This table holds UDP related information on each known
management station."
::= { community 5 } intAddressEntry OBJECT-TYPE
SYNTAX IntAddressEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
""
INDEX { intAddressDestination }
::= { intAddressTable 1 } IntAddressEntry ::=
SEQUENCE {
intAddressDestination IpAddress,
intAddressUDPPort Integer32,
intAddressMaxPacketSize Integer32 (484..65535),
intAddressStatus RowStatus
} intAddressDestination OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The ip address of the management station."
::= { intAddressEntry 1 } intAddressUDPPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The UDP port to which traps will be sent to
this destination."
DEFVAL { 162 }
::= { intAddressEntry 2 } intAddressMaxPacketSize OBJECT-TYPE
SYNTAX Integer32 (484..65535)
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The maximum packet size in bytes for Messages
sent to this destination. The max size of a packet
sent to this destination will be the minumim of
this variable and agentMaxPacketSize.0."
::= { intAddressEntry 3 } intAddressStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The status of this conceptual row in the
intAddressTable."
::= { intAddressEntry 4 } intTrapDestTable OBJECT-TYPE
SYNTAX SEQUENCE OF IntTrapDestEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The intTrapDestTable defines to which destination all traps
for a specific community should be sent."
::= { trap 1 } intTrapDestEntry OBJECT-TYPE
SYNTAX IntTrapDestEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
""
INDEX { intTrapDestCommunityString, intTrapDestDestination }
::= { intTrapDestTable 1 } IntTrapDestEntry ::=
SEQUENCE {
intTrapDestCommunityString DisplayString,
intTrapDestDestination IpAddress,
intTrapDestStatus RowStatus,
intTrapDestSnmpVersion INTEGER
} intTrapDestCommunityString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
""
::= { intTrapDestEntry 1 } intTrapDestDestination OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
""
::= { intTrapDestEntry 2 } intTrapDestStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The status of this conceptual row in the
intTrapDestTable."
::= { intTrapDestEntry 3 } intTrapDestSnmpVersion OBJECT-TYPE
SYNTAX INTEGER { v1(1), v2(2) }
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The SNMP version of the manager. If it is v1,
SNMPv1Traps are sent. If it is v2, SNMPv2Traps are sent"
::= { intTrapDestEntry 4 } intViewTable OBJECT-TYPE
SYNTAX SEQUENCE OF IntViewEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Locally held information about the MIB views
known to this agent.
Each MIB view is defined by two
collections of view subtrees: the included view
subtrees, and the excluded view subtrees. Every
such subtree, both included and excluded, is
defined in this table.
To determine if a particular object instance is in
a particular MIB view, compare the object
instance's OBJECT IDENTIFIER with each of the MIB
view's entries in this table. If none match, then
the object instance is not in the MIB view. If
one or more match, then the object instance is
included in, or excluded from, the MIB view
according to the value of viewType in the entry
whose value of viewSubtree has the most sub-
identifiers. If multiple entries match and have
the same number of sub-identifiers, then the
lexicographically greatest instance of viewType
determines the inclusion or exclusion.
An object instance's OBJECT IDENTIFIER X matches
an entry in this table when the number of sub-
identifiers in X is at least as many as in the
value of viewSubtree for the entry, and each sub-
identifier in the value of viewSubtree matches its
corresponding sub-identifier in X. Two sub-
identifiers match either if the corresponding bit
of viewMask is zero (the 'wild card' value), or if
they are equal.
Due to this 'wild card' capability, we introduce
the term, a 'family' of view subtrees, to refer to
the set of subtrees defined by a particular
combination of values of viewSubtree and viewMask.
In the case where no 'wild card' is defined in
viewMask, the family of view subtrees reduces to a
single view subtree."
::= { view 1 } intViewEntry OBJECT-TYPE
SYNTAX IntViewEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Information on a particular family of view
subtrees included in or excluded from a particular
MIB view.
Implementations must not restrict the number of
families of view subtrees for a given MIB view,
except as dictated by resource constraints on the
overall number of entries in the viewTable."
INDEX { intViewIndex, intViewSubtree }
::= { intViewTable 1 } IntViewEntry ::=
SEQUENCE {
intViewIndex Integer32,
intViewSubtree OBJECT IDENTIFIER,
intViewMask OCTET STRING,
intViewType INTEGER,
intViewStorageType StorageType,
intViewStatus RowStatus
} intViewIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A unique value for each MIB view. The value for
each MIB view must remain constant at least from
one re-initialization of the entity's network
management system to the next re-initialization."
::= { intViewEntry 1 } intViewSubtree OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A MIB subtree."
::= { intViewEntry 2 } intViewMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The bit mask which, in combination with the
corresponding instance of viewSubtree, defines a
family of view subtrees.
Each bit of this bit mask corresponds to a sub-
identifier of viewSubtree, with the most
significant bit of the i-th octet of this octet
string value (extended if necessary, see below)
corresponding to the (8*i - 7)-th sub-identifier,
and the least significant bit of the i-th octet of
this octet string corresponding to the (8*i)-th
sub-identifier, where i is in the range 1 through
16.
Each bit of this bit mask specifies whether or not
the corresponding sub-identifiers must match when
determining if an OBJECT IDENTIFIER is in this
family of view subtrees; a '1' indicates that an
exact match must occur; a '0' indicates 'wild
card', i.e., any sub-identifier value matches.
Thus, the OBJECT IDENTIFIER X of an object
instance is contained in a family of view subtrees
if the following criteria are met:
for each sub-identifier of the value of
viewSubtree, either:
the i-th bit of viewMask is 0, or
the i-th sub-identifier of X is equal to
the i-th sub-identifier of the value of
viewSubtree.
If the value of this bit mask is M bits long and
there are more than M sub-identifiers in the
corresponding instance of viewSubtree, then the
bit mask is extended with 1's to be the required
length.
Note that when the value of this object is the
zero-length string, this extension rule results in
a mask of all-1's being used (i.e., no 'wild
card'), and the family of view subtrees is the one
view subtree uniquely identified by the
corresponding instance of viewSubtree."
DEFVAL { ''H }
::= { intViewEntry 3 } intViewType OBJECT-TYPE
SYNTAX INTEGER {
included(1),
excluded(2)
}
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The status of a particular family of view
subtrees within the particular
MIB view. The value 'included(1)' indicates that
the corresponding instances of viewSubtree and
viewMask define a family of view subtrees included
in the MIB view. The value 'excluded(2)'
indicates that the corresponding instances of
viewSubtree and viewMask define a family of view
subtrees excluded from the MIB view."
DEFVAL { included }
::= { intViewEntry 4 } intViewStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The storage type for this conceptual row in the
intViewTable."
DEFVAL { nonVolatile }
::= { intViewEntry 5 } intViewStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The status of this conceptual row in the
intViewTable."
::= { intViewEntry 6 } -- conformance information otpSnmpeaMIBCompliances
OBJECT IDENTIFIER ::= { otpSnmpeaMIBConformance 1 } otpSnmpeaMIBGroups
OBJECT IDENTIFIER ::= { otpSnmpeaMIBConformance 2 } -- compliance statements otpSnmpeaBasicCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for SNMPv2 entities which
implement the OTP-SNMPEA-MIB."
MODULE -- this module
MANDATORY-GROUPS { addressGroup }
::= { otpSnmpeaMIBCompliances 1 } -- units of conformance communityGroup OBJECT-GROUP
OBJECTS { intCommunityViewIndex,
intCommunityAccess,
intCommunityStatus }
STATUS obsolete
DESCRIPTION
"A collection of objects providing basic instrumentation
of the load of the OTP system."
::= { otpSnmpeaMIBGroups 1 } addressGroup OBJECT-GROUP
OBJECTS { intAgentIpAddress,
intAgentUDPPort,
intAgentMaxPacketSize,
intAddressUDPPort,
intAddressMaxPacketSize,
intAddressStatus }
STATUS obsolete
DESCRIPTION
"A collection of objects providing basic instrumentation
of the load of the OTP system."
::= { otpSnmpeaMIBGroups 2 } trapGroup OBJECT-GROUP
OBJECTS { intTrapDestStatus,
intTrapDestSnmpVersion }
STATUS obsolete
DESCRIPTION
"A collection of objects providing basic instrumentation
of the load of the OTP system."
::= { otpSnmpeaMIBGroups 3 } viewGroup OBJECT-GROUP
OBJECTS { intViewMask,
intViewType,
intViewStorageType,
intViewStatus }
STATUS obsolete
DESCRIPTION
"A collection of objects providing basic instrumentation
of the load of the OTP system."
::= { otpSnmpeaMIBGroups 4 } END

SNMP Erlang/OTP