*

Trigger the user-probe user_trace_i4s4 in the NIF library dyntrace.so by calling dyntrace:p/{1,2,3,4,5,6,7,8}.

*

Set a user specified tag that will be present in the trace messages of both the efile_drv and the user-probe mentioned above.

This function uses the NIF library to determine if dynamic tracing is available. Usually calling erlang:system_info/1 is a better indicator of the availability of dynamic tracing.

The function will throw an exception if the dyntrace NIF library could not be loaded by the on_load function of this module.

Calling this function will trigger the "user" trace probe user_trace_i4s4 in the dyntrace NIF module, sending a trace message only containing the user tag and zeroes/empty strings in all other fields.

Calling this function will trigger the "user" trace probe user_trace_i4s4 in the dyntrace NIF module, sending a trace message containing the user tag and the integer or string parameter in the first integer/string field.

Calling this function will trigger the "user" trace probe user_trace_i4s4 in the dyntrace NIF module, sending a trace message containing the user tag and the integer() or string() parameters as the first fields of respective type. integer() parameters should be put before any string() parameters. I.e. p(1,"Hello") is ok, as is p(1,1) and p("Hello","Again"), but not p("Hello",1).

Calling this function will trigger the "user" trace probe user_trace_i4s4 in the dyntrace NIF module, sending a trace message containing the user tag and the integer() or string() parameters as the first fields of respective type. integer() parameters should be put before any string() parameters, as in p/2.

Calling this function will trigger the "user" trace probe user_trace_i4s4 in the dyntrace NIF module, sending a trace message containing the user tag and the integer() or string() parameters as the first fields of respective type. integer() parameters should be put before any string() parameters, as in p/2.

Calling this function will trigger the "user" trace probe user_trace_i4s4 in the dyntrace NIF module, sending a trace message containing the user tag and the integer() or string() parameters as the first fields of respective type. integer() parameters should be put before any string() parameters, as in p/2.

There can be no more than four parameters of any type (integer() or string()), so the first parameter has to be an integer() and the last a string().

Calling this function will trigger the "user" trace probe user_trace_i4s4 in the dyntrace NIF module, sending a trace message containing the user tag and the integer() or string() parameters as the first fields of respective type. integer() parameters should be put before any string() parameters, as in p/2.

There can be no more than four parameters of any type (integer() or string()), so the first two parameters has to be integer()'s and the last two string()'s.

Calling this function will trigger the "user" trace probe user_trace_i4s4 in the dyntrace NIF module, sending a trace message containing the user tag and the integer() or string() parameters as the first fields of respective type. integer() parameters should be put before any string() parameters, as in p/2.

There can be no more than four parameters of any type (integer() or string()), so the first three parameters has to be integer()'s and the last three string()'s.

Calling this function will trigger the "user" trace probe user_trace_i4s4 in the dyntrace NIF module, sending a trace message containing all the integer()'s and string()'s provided, as well as any user tag set in the current process.

This function returns the user tag set in the current process. If no tag is set or dynamic tracing is not available, it returns undefined

This function returns the user tag set in the current process or, if no user tag is present, the last user tag sent to the process together with a message (in the same way as sequential trace tokens are spread to other processes together with messages. For an explanation of how user tags can be spread together with messages, see spread_tag/1. If no tag is found or dynamic tracing is not available, it returns undefined

Types:

This function sets the user tag of the current process. The user tag is a binary(), but can be specified as any iodata(), which is automatically converted to a binary by this function.

The user tag is provided to the user probes triggered by calls top dyntrace:p/{1,2,3,4,5,6,7,8} as well as probes in the efile_driver. In the future, user tags might be added to more probes.

The old user tag (if any) is returned, or undefined if no user tag was present or dynamic tracing is not enabled.

Types:

This function controls if user tags are to be spread to other processes with the next message. Spreading of user tags work like spreading of sequential trace tokens, so that a received user tag will be active in the process until the next message arrives (if that message does not also contain the user tag.

This functionality is used when a client process communicates with a file i/o-server to spread the user tag to the I/O-server and then down to the efile_drv driver. By using spread_tag/1 and restore_tag/1, one can enable or disable spreading of user tags to other processes and then restore the previous state of the user tag. The TagData returned from this call contains all previous information so the state (including any previously spread user tags) will be completely restored by a later call to restore_tag/1.

The file module already spread's tags, so there is no need to manually call these function to get user tags spread to the efile driver through that module.

The most use of this function would be if one for example uses the io module to communicate with an I/O-server for a regular file, like in the following example:

f() ->


   {ok, F} = file:open("test.tst",[write]),


   Saved = dyntrace:spread_tag(true),


   io:format(F,"Hello world!",[]),


   dyntrace:restore_tag(Saved),


   file:close(F).

In this example, any user tag set in the calling process will be spread to the I/O-server when the io:format call is done.

Types:

Restores the previous state of user tags and their spreading as it was before a call to spread_tag/1. Note that the restoring is not limited to the same process, one can utilize this to turn off spreding in one process and restore it in a newly created, the one that actually is going to send messages:

f() ->


    TagData=dyntrace:spread_tag(false),


    spawn(fun() ->


             dyntrace:restore_tag(TagData),


             do_something()


          end),


    do_something_else(),


    dyntrace:restore_tag(TagData).

Correctly handling user tags and their spreading might take some effort, as Erlang programs tend to send and receive messages so that sometimes the user tag gets lost due to various things, like double receives or communication with a port (ports do not handle user tags, in the same way as they do not handle regular sequential trace tokens).