| funtable(1) | SAORD Documentation | funtable(1) |
funtable - copy selected rows from a Funtools file to a FITS binary table
funtable [-a] [-i⎪-z] [-m] [-s cols] <iname> <oname> [columns]
-a # append to existing output file as a table extension -i # for image data, only generate X and Y columns -m # for tables, write a separate file for each region -s "col1 ..." # columns on which to sort -z # for image data, output zero-valued pixels
funtable selects rows from the specified FITS Extension (binary table only) of a FITS file, or from a non-FITS raw event file, and writes those rows to a FITS binary table file. It also will create a FITS binary table from an image or a raw array file.
The first argument to the program specifies the FITS file, raw event file, or raw array file. If "stdin" is specified, data are read from the standard input. Use Funtools Bracket Notation to specify FITS extensions, and filters. The second argument is the output FITS file. If "stdout" is specified, the FITS binary table is written to the standard output. By default, all columns of the input file are copied to the output file. Selected columns can be output using an optional third argument in the form:
"column1 column1 ... columnN"
The funtable program generally is used to select rows from a FITS binary table using Table Filters and/or Spatial Region Filters. For example, you can copy only selected rows (and output only selected columns) by executing in a command such as:
[sh] funtable "test.ev[pha==1&&pi==10]" stdout "x y pi pha" ⎪ fundisp stdin
X Y PHA PI
------- ------- ------- ---------
1 10 1 10
1 10 1 10
1 10 1 10
1 10 1 10
1 10 1 10
1 10 1 10
1 10 1 10
1 10 1 10
1 10 1 10
1 10 1 10
The special column $REGION can be specified to write the region id of each row:
[sh $] funtable "test.ev[time-(int)time>=.99&&annulus(0 0 0 10 n=3)]" stdout 'x y time $REGION' ⎪ fundisp stdin
X Y TIME REGION
-------- -------- --------------------- ----------
5 -6 40.99000000 3
4 -5 59.99000000 2
-1 0 154.99000000 1
-2 1 168.99000000 1
-3 2 183.99000000 2
-4 3 199.99000000 2
-5 4 216.99000000 2
-6 5 234.99000000 3
-7 6 253.99000000 3
Here only rows with the proper fractional time and whose position also is within one of the three annuli are written.
Columns can be excluded from display using a minus sign before the column:
[sh $] funtable "test.ev[time-(int)time>=.99]" stdout "-time" ⎪ fundisp stdin
X Y PHA PI DX DY
-------- -------- -------- ---------- ----------- -----------
5 -6 5 -6 5.50 -6.50
4 -5 4 -5 4.50 -5.50
-1 0 -1 0 -1.50 0.50
-2 1 -2 1 -2.50 1.50
-3 2 -3 2 -3.50 2.50
-4 3 -4 3 -4.50 3.50
-5 4 -5 4 -5.50 4.50
-6 5 -6 5 -6.50 5.50
-7 6 -7 6 -7.50 6.50
All columns except the time column are written.
In general, the rules for activating and de-activating columns are:
In addition to specifying columns names explicitly, the special symbols + and - can be used to activate and de-activate all columns. This is useful if you want to activate the $REGION column along with all other columns. According to the rules, the syntax "$REGION" only activates the region column and de-activates the rest. Use "+ $REGION" to activate all columns as well as the region column.
Ordinarily, only the selected table is copied to the output file. In a FITS binary table, it sometimes is desirable to copy all of the other FITS extensions to the output file as well. This can be done by appending a '+' sign to the name of the extension in the input file name. For example, the first command below copies only the EVENT table, while the second command copies other extensions as well:
[sh] funtable "/proj/rd/data/snr.ev[EVENTS]" events.ev [sh] funtable "/proj/rd/data/snr.ev[EVENTS+]" eventsandmore.ev
If the input file is an image or a raw array file, then funtable will generate a FITS binary table from the pixel values in the image. Note that it is not possible to specify the columns to output (using command-line argument 3). Instead, there are two ways to create such a binary table from an image. By default, a 3-column table is generated, where the columns are "X", "Y", and "VALUE". For each pixel in the image, a single row (event) is generated with the "X" and "Y" columns assigned the dim1 and dim2 values of the image pixel, respectively and the "VALUE" column assigned the value of the pixel. With sort of table, running funhist on the "VALUE" column will give the same results as running funhist on the original image.
If the -i ("individual" rows) switch is specified, then only the "X" and "Y" columns are generated. In this case, each positive pixel value in the image generates n rows (events), where n is equal to the integerized value of that pixel (plus 0.5, for floating point data). In effect, -i approximately recreates the rows of a table that would have been binned into the input image. (Of course, this is only approximately correct, since the resulting x,y positions are integerized.)
If the -s [col1 col2 ... coln] ("sort") switch is specified, the output rows of a binary table will be sorted using the specified columns as sort keys. The sort keys must be scalar columns and also must be part of the output file (i.e. you cannot sort on a column but not include it in the output). This facility uses the _sort program (included with funtools), which must be accessible via your path.
For binary tables, the -m ("multiple files") switch will generate a separate file for each region in the filter specification i.e. each file contains only the rows from that region. Rows which pass the filter but are not in any region also are put in a separate file.
The separate output file names generated by the -m switch are produced automatically from the root output file to contain the region id of the associated region. (Note that region ids start at 1, so that the file name associated with id 0 contains rows that pass the filter but are not in any given region.) Output file names are generated as follows:
funtable -m input.fits'[cir(512,512,1);cir(520,520,1)...]' 'foo.goo_$n.fits'
will generate files named foo.goo_0.fits (for rows not in any region but still passing the filter), foo.goo_1.fits (rows in region id #1, the first region), foo.goo_2.fits (rows in region id #2), etc. Note that single quotes in the output root are required to protect the '$' from the shell.
funtable -m input.fits'[cir(512,512,1);cir(520,520,1)...]' foo.evt.fits
will generate files named foo0.evt.fits (for rows not in any region but still passing the filter), foo1.evt.fits (rows in region id #1), foo2.evt.fits (rows in region id #2), etc.
funtable -m input.fits'[cir(512,512,1);cir(520,520,1)...]' 'foo_evt'
will generate files named foo_evt0 (for rows not in any region but still passing the filter), foo_evt1 (rows in region id #1), foo_evt2 (rows in region id #2), etc.
The multiple file mechanism provide a simple way to generate individual source data files with a single pass through the data.
By default, a new FITS file is created and the binary table is written to the first extension. If the -a (append) switch is specified, the table is appended to an existing FITS file as a BINTABLE extension. Note that the output FITS file must already exist.
If the -z ("zero" pixel values) switch is specified and -i is not specified, then pixels having a zero value will be output with their "VALUE" column set to zero. Obviously, this switch does not make sense when individual events are output.
See funtools(7) for a list of Funtools help pages
| April 14, 2011 | version 1.4.5 |