DOKK / manpages / debian 12 / gmerlin / gmerlin-record.1.en
GMERLIN-RECORD(1) User Manuals GMERLIN-RECORD(1)

gmerlin-record - Gmerlin commandline recorder

gmerlin-record [options]

Commandline recorder

-aud <audio_options>

Set audio recording options
do_audio=[1|0] (default: 1)

Record audio

plugin=option[{suboptions}]

Supported options: i_alsa i_oss i_pulse

Default: i_alsa

Plugin

Suboptions for plugin=i_alsa

card=<string>

Supported strings: default hw:1,0 hw:2,0 hw:2,2

Default: default

Card

channel_mode=<string>

Supported strings: mono stereo

Default: stereo

Channel Mode

bits=<string>

Supported strings: 8 16

Default: 16

Bits

samplerate=<number> (8000..96000, default: 44100)

Samplerate [Hz]

buffer_time=<number> (10..10000, default: 1000)

Buffer time

Set the buffer time (in milliseconds). Larger values improve recording performance on slow systems under load.

user_device=<string>

User device

Enter a custom device to use for recording. Leave empty to use the settings above

Suboptions for plugin=i_oss

device=<string> (Default: /dev/dsp)

Device

channel_mode=<string>

Supported strings: Mono Stereo

Default: Stereo

Channel Mode

bits=<string>

Supported strings: 8 16

Default: 16

Bits

samplerate=<number> (8000..96000, default: 44100)

Samplerate [Hz]

Suboptions for plugin=i_pulse

channel_mode=<string>

Supported strings: mono stereo

Default: stereo

Channel Mode

bits=<string>

Supported strings: 8 16

Default: 16

Bits

samplerate=<number> (8000..96000, default: 44100)

Samplerate [Hz]

server=<string>

Server

Server to connect to. Leave empty for default.

dev=<string>

Source

Source to open. Use the PulseAudio manager for available Sources.

Language=<string>

Supported strings: aar abk ace ach ada afa afh afr aka akk ale alg amh ang apa ara arc arn arp art arw asm ath aus ava ave awa aym aze bad bai bak bal bam ban bas bat bej bel bem ben ber bho bih bik bin bis bla bnt tib bos bra bre btk bua bug bul cad cai car cat cau ceb cel cze cha chb che chg chk chm chn cho chp chr chu chv chy cmc cop cor cos cpe cpf cpp cre crp cus wel dak dan day del den ger dgr din div doi dra dua dum dyu dzo efi egy eka gre elx eng enm epo est baq ewe ewo fan fao per fat fij fin fiu fon fre frm fro fry ful fur gaa gay gba gem gez gil gla gle glg glv gmh goh gon gor got grb grc grn guj gwi hai hau haw heb her hil him hin hit hmn hmo scr hun hup arm iba ibo ijo iku ile ilo ina inc ind ine ipk ira iro ice ita jav jpn jpr kaa kab kac kal kam kan kar kas geo kau kaw kaz kha khi khm kho kik kin kir kmb kok kom kon kor kos kpe kro kru kum kur kut lad lah lam lao lat lav lez lin lit lol loz ltz lua lub lug lui lun luo lus mad mag mah mai mak mal man map mar mas mdr men mga mic min mis mac mkh mlg mlt mnc mni mno moh mol mon mos mao may mul mun mus mwr bur myn nah nai nau nav nbl nde ndo nds nep new nia nic niu dut nno nob non nor nso nub nya nym nyn nyo nzi oci oji ori orm osa oss ota oto paa pag pal pam pan pap pau peo phi pli pol pon por pra pro pus que raj rap rar roa rom rum run rus sad sag sah sai sal sam san sas sat sco sel sem sga sgn shn sid sin sio sit sla slo slv sme smi smo sna snd snk sog som son sot spa alb srd scc srr ssa ssw suk sun sus sux swa swe syr tah tai tam tat tel tem ter tet tgk tgl tha tig tir tiv tkl tli tmh tog ton tpi tsi tsn tso tuk tum tur tut tvl twi tyv uga uig ukr umb und urd uzb vai ven vie vol vot wak wal war was wen wol xho yao yap yid yor ypk zap zen zha chi znd zul zun

Default: eng

Language

-vid <video_options>

Set video recording options
do_video=[1|0] (default: 1)

Record video

plugin=option[{suboptions}]

Supported options: i_v4l2 i_x11

Default: i_v4l2

Plugin

Suboptions for plugin=i_v4l2

device=option[{suboptions}]

Supported options: /dev/video0 /dev/video1

Default: /dev/video0

V4L2 Device

Suboptions for device=/dev/video0

Brightness=<number> (0..255, default: 128)

Brightness

Contrast=<number> (0..255, default: 64)

Contrast

Saturation=<number> (0..4, default: 2)

Saturation

Hue=<number> (-2..2, default: 0)

Hue

WhiteBalanceTemperature,Auto=[1|0] (default: 1)

White Balance Temperature, Auto

Gamma=<number> (1..3, default: 2)

Gamma

WhiteBalanceTemperature=<number> (2800..6500, default: 3725)

White Balance Temperature

Sharpness=<number> (1..7, default: 3)

Sharpness

BacklightCompensation=<number> (0..1, default: 0)

Backlight Compensation

force_rw=[1|0] (default: 1)

Force read

Don't use memory mapping

resolution=<string>

Supported strings: qsif qcif qvga sif cif vga user

Default: qvga

Resolution

user_width=<number> (160..1024, default: 720)

User defined width

user_height=<number> (112..768, default: 576)

User defined height

Suboptions for plugin=i_x11

root=[1|0] (default: 0)

Grab from root window

draw_cursor=[1|0] (default: 1)

Draw cursor

win_ontop=[1|0] (default: 1)

Keep grab window on top

win_sticky=[1|0] (default: 1)

Make grab window sticky

disable_screensaver=[1|0] (default: 1)

Disable screensaver

Disable screensaver and energy saving mode

fps=<number> (1.00..100.00, default: 25.00)

Capture rate

Specify the capture rate (in frames per second)

-af <audio filter options>

Set audio filter options
f={option[{suboptions}][:option[{suboptions}]...]}

Supported options: fa_ladspa_fourByFourPole fa_ladspa_amPitchshift fa_ladspa_alias fa_ladspa_allpass_c fa_ladspa_allpass_l fa_ladspa_allpass_n fa_ladspa_artificialLatency fa_ladspa_divider fa_ladspa_autoPhaser fa_ladspa_satanMaximiser fa_ladspa_chebstortion fa_ladspa_comb fa_ladspa_comb_c fa_ladspa_comb_l fa_ladspa_comb_n fa_ladspa_const fa_ladspa_crossoverDist fa_ladspa_dcRemove fa_ladspa_dj_eq fa_ladspa_dj_eq_mono fa_ladspa_djFlanger fa_ladspa_decimator fa_ladspa_declip fa_ladspa_delayorama fa_ladspa_diode fa_ladspa_dysonCompress fa_ladspa_decay fa_ladspa_fmOsc fa_ladspa_fastLookaheadLimiter fa_ladspa_foverdrive fa_ladspa_flanger fa_ladspa_foldover fa_channels fa_sampleformat fa_samplerate fa_ladspa_fadDelay fa_ladspa_freqTracker fa_ladspa_butthigh_iir fa_ladspa_buttlow_iir fa_ladspa_gsm fa_ladspa_gate fa_ladspa_giantFlange fa_ladspa_bandpass_a_iir fa_ladspa_bandpass_iir fa_ladspa_highpass_iir fa_ladspa_lowpass_iir fa_ladspa_gongBeater fa_ladspa_gong fa_ladspa_hardLimiter fa_ladspa_harmonicGen fa_ladspa_hermesFilter fa_ladspa_pitchScaleHQ fa_ladspa_imp fa_ladspa_inv fa_ladspa_karaoke fa_ladspa_lcrDelay fa_ladspa_lfoPhaser fa_ladspa_lsFilter fa_ladspa_notch_iir fa_ladspa_matrixSpatialiser fa_ladspa_matrixMSSt fa_ladspa_matrixStMS fa_ladspa_mbeq fa_ladspa_multivoiceChorus fa_ladspa_pitchScale fa_ladspa_pointerCastDistortion fa_ladspa_rateShifter fa_ladspa_retroFlange fa_ladspa_revdelay fa_ladspa_ringmod_1i1o1l fa_ladspa_sc1 fa_ladspa_sc4 fa_ladspa_sc4m fa_ladspa_se4 fa_ladspa_sifter fa_ladspa_amp fa_ladspa_delay_c fa_ladspa_delay_l fa_ladspa_delay_n fa_ladspa_singlePara fa_ladspa_sinusWavewrapper fa_ladspa_smoothDecimate fa_ladspa_svf fa_ladspa_tap_autopan fa_ladspa_tap_chorusflanger fa_ladspa_tap_deesser fa_ladspa_tap_dynamics_m fa_ladspa_tap_dynamics_st fa_ladspa_tap_equalizer fa_ladspa_tap_equalizer_bw fa_ladspa_tap_doubler fa_ladspa_tap_pinknoise fa_ladspa_tap_pitch fa_ladspa_tap_reflector fa_ladspa_tap_reverb fa_ladspa_tap_rotspeak fa_ladspa_tap_limiter fa_ladspa_tap_sigmoid fa_ladspa_tap_stereo_echo fa_ladspa_tap_tremolo fa_ladspa_tap_tubewarmth fa_ladspa_tap_vibrato fa_ladspa_tapeDelay fa_ladspa_transient fa_ladspa_triplePara fa_ladspa_valveRect fa_ladspa_valve fa_ladspa_vocoder fa_volume fa_ladspa_vynil fa_ladspa_shaper fa_ladspa_zm1

Audio Filters

Suboptions for fa_ladspa_fourByFourPole

Frequency1=<number> (1.000..20000.000, default: 5000.750)

Frequency 1

Feedback1=<number> (-1.000..1.000, default: 5000.750)

Feedback 1

Frequency2=<number> (1.000..20000.000, default: 10000.500)

Frequency 2

Feedback2=<number> (-1.000..1.000, default: 10000.500)

Feedback 2

Frequency3=<number> (1.000..20000.000, default: 15000.250)

Frequency 3

Feedback3=<number> (-1.000..1.000, default: 15000.250)

Feedback 3

Frequency4=<number> (1.000..20000.000, default: 20000.000)

Frequency 4

Feedback4=<number> (-1.000..1.000, default: 20000.000)

Feedback 4

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_amPitchshift

Pitchshift=<number> (0.250..4.000, default: 0.000)

Pitch shift

Buffersize=<number> (default: 4)

Buffer size

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_alias

Aliasinglevel=<number> (0.000..1.000, default: 0.000)

Aliasing level

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_allpass_c

MaxDelay(s)=<number> (default: 0.000)

Max Delay (s)

DelayTime(s)=<number> (default: 0.000)

Delay Time (s)

DecayTime(s)=<number> (default: 0.000)

Decay Time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_allpass_l

MaxDelay(s)=<number> (default: 0.000)

Max Delay (s)

DelayTime(s)=<number> (default: 0.000)

Delay Time (s)

DecayTime(s)=<number> (default: 0.000)

Decay Time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_allpass_n

MaxDelay(s)=<number> (default: 0.000)

Max Delay (s)

DelayTime(s)=<number> (default: 0.000)

Delay Time (s)

DecayTime(s)=<number> (default: 0.000)

Decay Time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_artificialLatency

Delay(ms)=<number> (0.000..10000.000, default: 2500.000)

Delay (ms)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_divider

Denominator=<number> (default: 0)

Denominator

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_autoPhaser

Attacktime(s)=<number> (0.000..1.000, default: 0.250)

Attack time (s)

Decaytime(s)=<number> (0.000..1.000, default: 0.250)

Decay time (s)

Modulationdepth=<number> (0.000..1.000, default: 0.250)

Modulation depth

Feedback=<number> (-1.000..1.000, default: 0.250)

Feedback

Spread(octaves)=<number> (0.000..2.000, default: 0.250)

Spread (octaves)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_satanMaximiser

Decaytime(samples)=<number> (2.000..30.000, default: 30.000)

Decay time (samples)

Kneepoint(dB)=<number> (-90.000..0.000, default: 30.000)

Knee point (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_chebstortion

Distortion=<number> (0.000..3.000, default: 0.000)

Distortion

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_comb

Bandseparation(Hz)=<number> (16.000..640.000, default: 172.000)

Band separation (Hz)

Feedback=<number> (-0.990..0.990, default: 172.000)

Feedback

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_comb_c

MaxDelay(s)=<number> (default: 0.000)

Max Delay (s)

DelayTime(s)=<number> (default: 0.000)

Delay Time (s)

DecayTime(s)=<number> (default: 0.000)

Decay Time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_comb_l

MaxDelay(s)=<number> (default: 0.000)

Max Delay (s)

DelayTime(s)=<number> (default: 0.000)

Delay Time (s)

DecayTime(s)=<number> (default: 0.000)

Decay Time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_comb_n

MaxDelay(s)=<number> (default: 0.000)

Max Delay (s)

DelayTime(s)=<number> (default: 0.000)

Delay Time (s)

DecayTime(s)=<number> (default: 0.000)

Decay Time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_const

Signalamplitude=<number> (-1.000..1.100, default: 0.000)

Signal amplitude

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_crossoverDist

Crossoveramplitude=<number> (0.000..0.100, default: 0.000)

Crossover amplitude

Smoothing=<number> (0.000..1.000, default: 1.000)

Smoothing

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_dcRemove

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_dj_eq

Logain(dB)=<number> (-70.000..6.000, default: 0.000)

Lo gain (dB)

Midgain(dB)=<number> (-70.000..6.000, default: 0.000)

Mid gain (dB)

Higain(dB)=<number> (-70.000..6.000, default: 0.000)

Hi gain (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_dj_eq_mono

Logain(dB)=<number> (-70.000..6.000, default: 0.000)

Lo gain (dB)

Midgain(dB)=<number> (-70.000..6.000, default: 0.000)

Mid gain (dB)

Higain(dB)=<number> (-70.000..6.000, default: 0.000)

Hi gain (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_djFlanger

LFOsync=<number> (default: 0.000)

LFO sync

LFOperiod(s)=<number> (0.100..32.000, default: 0.000)

LFO period (s)

LFOdepth(ms)=<number> (1.000..5.000, default: 4.000)

LFO depth (ms)

Feedback(%)=<number> (-100.000..100.000, default: 4.000)

Feedback (%)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_decimator

Bitdepth=<number> (1.000..24.000, default: 24.000)

Bit depth

Samplerate(Hz)=<number> (0.001..1.000, default: 1.000)

Sample rate (Hz)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_declip

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_delayorama

Randomseed=<number> (default: 0)

Random seed

Inputgain(dB)=<number> (-96.000..24.000, default: 0.000)

Input gain (dB)

Feedback(%)=<number> (0.000..100.000, default: 0.000)

Feedback (%)

Numberoftaps=<number> (default: 2)

Number of taps

Firstdelay(s)=<number> (0.000..5.000, default: 2.000)

First delay (s)

Delayrange(s)=<number> (0.000..6.000, default: 6.000)

Delay range (s)

Delaychange=<number> (0.200..5.000, default: 6.000)

Delay change

Delayrandom(%)=<number> (0.000..100.000, default: 6.000)

Delay random (%)

Amplitudechange=<number> (0.200..5.000, default: 6.000)

Amplitude change

Amplituderandom(%)=<number> (0.000..100.000, default: 6.000)

Amplitude random (%)

Dry/wetmix=<number> (0.000..1.000, default: 6.000)

Dry/wet mix

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_diode

Mode(0fornone,1forhalfwave,2forfullwave)=<number> (0.000..3.000, default: 0.000)

Mode (0 for none, 1 for half wave, 2 for full wave)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_dysonCompress

Peaklimit(dB)=<number> (-30.000..0.000, default: 0.000)

Peak limit (dB)

Releasetime(s)=<number> (0.000..1.000, default: 0.250)

Release time (s)

Fastcompressionratio=<number> (0.000..1.000, default: 0.500)

Fast compression ratio

Compressionratio=<number> (0.000..1.000, default: 0.500)

Compression ratio

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_decay

DecayTime(s)=<number> (default: 0.000)

Decay Time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_fmOsc

Waveform(1=sin,2=tri,3=squ,4=saw)=<number> (default: 0)

Waveform (1=sin, 2=tri, 3=squ, 4=saw)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_fastLookaheadLimiter

Inputgain(dB)=<number> (-20.000..20.000, default: 0.000)

Input gain (dB)

Limit(dB)=<number> (-20.000..0.000, default: 0.000)

Limit (dB)

Releasetime(s)=<number> (0.010..2.000, default: 0.507)

Release time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_foverdrive

Drivelevel=<number> (1.000..3.000, default: 1.000)

Drive level

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_flanger

Delaybase(ms)=<number> (0.100..25.000, default: 6.325)

Delay base (ms)

Maxslowdown(ms)=<number> (0.000..10.000, default: 2.500)

Max slowdown (ms)

LFOfrequency(Hz)=<number> (0.050..100.000, default: 0.334)

LFO frequency (Hz)

Feedback=<number> (-1.000..1.000, default: 0.334)

Feedback

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_foldover

Drive=<number> (0.000..1.000, default: 0.000)

Drive

Skew=<number> (0.000..1.000, default: 0.000)

Skew

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_channels

front_channels=<number> (1..5, default: 2)

Front channels

rear_channels=<number> (0..3, default: 0)

Rear channels

lfe=[1|0] (default: 0)

LFE

Suboptions for fa_sampleformat

sampleformat=<string>

Supported strings: Unsigned 8 bit Signed 8 bit Unsigned 16 bit Signed 16 bit Signed 32 bit Floating point

Default: Floating point

Sampleformat

Suboptions for fa_samplerate

samplerate=<string>

Supported strings: source 48000 44100 32000 24000 22050 user

Default: source

Samplerate [Hz]

user_rate=<number> (8000..192000, default: 44100)

User defined samplerate [Hz]

Suboptions for fa_ladspa_fadDelay

Delay(seconds)=<number> (0.100..10.000, default: 0.000)

Delay (seconds)

Feedback(dB)=<number> (-70.000..0.000, default: 0.000)

Feedback (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_freqTracker

Trackingspeed=<number> (0.000..1.000, default: 0.500)

Tracking speed

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_butthigh_iir

CutoffFrequency(Hz)=<number> (0.000..0.450, default: 0.001)

Cutoff Frequency (Hz)

Resonance=<number> (0.100..1.410, default: 0.755)

Resonance

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_buttlow_iir

CutoffFrequency(Hz)=<number> (0.000..0.450, default: 0.001)

Cutoff Frequency (Hz)

Resonance=<number> (0.100..1.410, default: 0.755)

Resonance

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_gsm

Dry/wetmix=<number> (0.000..1.000, default: 0.000)

Dry/wet mix

Numberofpasses=<number> (default: 0)

Number of passes

Errorrate(bits/block)=<number> (0.000..30.000, default: 0.000)

Error rate (bits/block)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_gate

LFkeyfilter(Hz)=<number> (0.001..0.100, default: 0.001)

LF key filter (Hz)

HFkeyfilter(Hz)=<number> (0.005..0.490, default: 0.490)

HF key filter (Hz)

Threshold(dB)=<number> (-70.000..20.000, default: -70.000)

Threshold (dB)

Attack(ms)=<number> (0.010..1000.000, default: 250.008)

Attack (ms)

Hold(ms)=<number> (2.000..2000.000, default: 1500.500)

Hold (ms)

Decay(ms)=<number> (2.000..4000.000, default: 2001.000)

Decay (ms)

Range(dB)=<number> (-90.000..0.000, default: -90.000)

Range (dB)

Outputselect(-1=keylisten,0=gate,1=bypass)=<number> (default: -90)

Output select (-1 = key listen, 0 = gate, 1 = bypass)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_giantFlange

Doubledelay=<number> (default: 0.000)

Double delay

LFOfrequency1(Hz)=<number> (0.000..30.000, default: 0.000)

LFO frequency 1 (Hz)

Delay1range(s)=<number> (0.000..10.500, default: 2.625)

Delay 1 range (s)

LFOfrequency2(Hz)=<number> (0.000..30.000, default: 2.625)

LFO frequency 2 (Hz)

Delay2range(s)=<number> (0.000..10.500, default: 2.625)

Delay 2 range (s)

Feedback=<number> (-100.000..100.000, default: 2.625)

Feedback

Dry/Wetlevel=<number> (0.000..1.000, default: 2.625)

Dry/Wet level

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_bandpass_a_iir

CenterFrequency(Hz)=<number> (0.000..0.450, default: 0.001)

Center Frequency (Hz)

Bandwidth(Hz)=<number> (0.000..0.450, default: 0.007)

Bandwidth (Hz)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_bandpass_iir

CenterFrequency(Hz)=<number> (0.000..0.450, default: 0.007)

Center Frequency (Hz)

Bandwidth(Hz)=<number> (0.000..0.450, default: 0.007)

Bandwidth (Hz)

Stages(2polesperstage)=<number> (default: 0)

Stages(2 poles per stage)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_highpass_iir

CutoffFrequency=<number> (0.000..0.450, default: 0.001)

Cutoff Frequency

Stages(2polesperstage)=<number> (default: 0)

Stages(2 poles per stage)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_lowpass_iir

CutoffFrequency=<number> (0.000..0.450, default: 0.055)

Cutoff Frequency

Stages(2polesperstage)=<number> (default: 0)

Stages(2 poles per stage)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_gongBeater

Impulsegain(dB)=<number> (-70.000..0.000, default: -70.000)

Impulse gain (dB)

Strikegain(dB)=<number> (-70.000..0.000, default: 0.000)

Strike gain (dB)

Strikeduration(s)=<number> (0.001..0.200, default: 0.101)

Strike duration (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_gong

Innerdamping=<number> (0.000..1.000, default: 0.500)

Inner damping

Outerdamping=<number> (0.000..1.000, default: 0.500)

Outer damping

Micposition=<number> (0.000..1.000, default: 0.250)

Mic position

Innersize1=<number> (0.000..1.000, default: 0.500)

Inner size 1

Innerstiffness1+=<number> (0.000..1.000, default: 0.500)

Inner stiffness 1 +

Innerstiffness1-=<number> (0.000..1.000, default: 0.500)

Inner stiffness 1 -

Innersize2=<number> (0.000..1.000, default: 0.500)

Inner size 2

Innerstiffness2+=<number> (0.000..1.000, default: 0.500)

Inner stiffness 2 +

Innerstiffness2-=<number> (0.000..1.000, default: 0.500)

Inner stiffness 2 -

Innersize3=<number> (0.000..1.000, default: 0.500)

Inner size 3

Innerstiffness3+=<number> (0.000..1.000, default: 0.500)

Inner stiffness 3 +

Innerstiffness3-=<number> (0.000..1.000, default: 0.500)

Inner stiffness 3 -

Innersize4=<number> (0.000..1.000, default: 0.500)

Inner size 4

Innerstiffness4+=<number> (0.000..1.000, default: 0.500)

Inner stiffness 4 +

Innerstiffness4-=<number> (0.000..1.000, default: 0.500)

Inner stiffness 4 -

Outersize1=<number> (0.000..1.000, default: 0.500)

Outer size 1

Outerstiffness1+=<number> (0.000..1.000, default: 0.500)

Outer stiffness 1 +

Outerstiffness1-=<number> (0.000..1.000, default: 0.500)

Outer stiffness 1 -

Outersize2=<number> (0.000..1.000, default: 0.500)

Outer size 2

Outerstiffness2+=<number> (0.000..1.000, default: 0.500)

Outer stiffness 2 +

Outerstiffness2-=<number> (0.000..1.000, default: 0.500)

Outer stiffness 2 -

Outersize3=<number> (0.000..1.000, default: 0.500)

Outer size 3

Outerstiffness3+=<number> (0.000..1.000, default: 0.500)

Outer stiffness 3 +

Outerstiffness3-=<number> (0.000..1.000, default: 0.500)

Outer stiffness 3 -

Outersize4=<number> (0.000..1.000, default: 0.500)

Outer size 4

Outerstiffness4+=<number> (0.000..1.000, default: 0.500)

Outer stiffness 4 +

Outerstiffness4-=<number> (0.000..1.000, default: 0.500)

Outer stiffness 4 -

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_hardLimiter

dBlimit=<number> (-50.000..0.000, default: 0.000)

dB limit

Wetlevel=<number> (0.000..1.000, default: 0.000)

Wet level

Residuelevel=<number> (0.000..1.000, default: 0.000)

Residue level

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_harmonicGen

Fundamentalmagnitude=<number> (-1.000..1.000, default: 0.000)

Fundamental magnitude

2ndharmonicmagnitude=<number> (-1.000..1.000, default: 0.000)

2nd harmonic magnitude

3rdharmonicmagnitude=<number> (-1.000..1.000, default: 0.000)

3rd harmonic magnitude

4thharmonicmagnitude=<number> (-1.000..1.000, default: 0.000)

4th harmonic magnitude

5thharmonicmagnitude=<number> (-1.000..1.000, default: 0.000)

5th harmonic magnitude

6thharmonicmagnitude=<number> (-1.000..1.000, default: 0.000)

6th harmonic magnitude

7thharmonicmagnitude=<number> (-1.000..1.000, default: 0.000)

7th harmonic magnitude

8thharmonicmagnitude=<number> (-1.000..1.000, default: 0.000)

8th harmonic magnitude

9thharmonicmagnitude=<number> (-1.000..1.000, default: 0.000)

9th harmonic magnitude

10thharmonicmagnitude=<number> (-1.000..1.000, default: 0.000)

10th harmonic magnitude

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_hermesFilter

LFO1freq(Hz)=<number> (0.000..1000.000, default: 250.000)

LFO1 freq (Hz)

LFO1wave(0=sin,1=tri,2=saw,3=squ,4=s&h)=<number> (default: 250)

LFO1 wave (0 = sin, 1 = tri, 2 = saw, 3 = squ, 4 = s&h)

LFO2freq(Hz)=<number> (0.000..1000.000, default: 250.000)

LFO2 freq (Hz)

LFO2wave(0=sin,1=tri,2=saw,3=squ,4=s&h)=<number> (default: 250)

LFO2 wave (0 = sin, 1 = tri, 2 = saw, 3 = squ, 4 = s&h)

Osc1freq(Hz)=<number> (0.000..4000.000, default: 440.000)

Osc1 freq (Hz)

Osc1wave(0=sin,1=tri,2=saw,3=squ,4=noise)=<number> (default: 440)

Osc1 wave (0 = sin, 1 = tri, 2 = saw, 3 = squ, 4 = noise)

Osc2freq(Hz)=<number> (0.000..4000.000, default: 440.000)

Osc2 freq (Hz)

Osc2wave(0=sin,1=tri,2=saw,3=squ,4=noise)=<number> (default: 440)

Osc2 wave (0 = sin, 1 = tri, 2 = saw, 3 = squ, 4 = noise)

Ringmod1depth(0=none,1=AM,2=RM)=<number> (0.000..2.000, default: 440.000)

Ringmod 1 depth (0=none, 1=AM, 2=RM)

Ringmod2depth(0=none,1=AM,2=RM)=<number> (0.000..2.000, default: 440.000)

Ringmod 2 depth (0=none, 1=AM, 2=RM)

Ringmod3depth(0=none,1=AM,2=RM)=<number> (0.000..2.000, default: 440.000)

Ringmod 3 depth (0=none, 1=AM, 2=RM)

Osc1gain(dB)=<number> (-70.000..20.000, default: -70.000)

Osc1 gain (dB)

RM1gain(dB)=<number> (-70.000..20.000, default: -70.000)

RM1 gain (dB)

Osc2gain(dB)=<number> (-70.000..20.000, default: -70.000)

Osc2 gain (dB)

RM2gain(dB)=<number> (-70.000..20.000, default: -70.000)

RM2 gain (dB)

Inputgain(dB)=<number> (-70.000..20.000, default: -70.000)

Input gain (dB)

RM3gain(dB)=<number> (-70.000..20.000, default: -70.000)

RM3 gain (dB)

Xoverlowerfreq=<number> (50.000..6000.000, default: 1537.500)

Xover lower freq

Xoverupperfreq=<number> (1000.000..10000.000, default: 7750.000)

Xover upper freq

Dist1drive=<number> (0.000..3.000, default: 7750.000)

Dist1 drive

Dist2drive=<number> (0.000..3.000, default: 7750.000)

Dist2 drive

Dist3drive=<number> (0.000..3.000, default: 7750.000)

Dist3 drive

Filt1type(0=none,1=LP,2=HP,3=BP,4=BR,5=AP)=<number> (default: 7750)

Filt1 type (0=none, 1=LP, 2=HP, 3=BP, 4=BR, 5=AP)

Filt1freq=<number> (0.000..8000.000, default: 440.000)

Filt1 freq

Filt1q=<number> (0.000..1.000, default: 440.000)

Filt1 q

Filt1resonance=<number> (0.000..1.000, default: 440.000)

Filt1 resonance

Filt1LFO1level=<number> (-500.000..500.000, default: 440.000)

Filt1 LFO1 level

Filt1LFO2level=<number> (-500.000..500.000, default: 440.000)

Filt1 LFO2 level

Filt2type(0=none,1=LP,2=HP,3=BP,4=BR,5=AP)=<number> (default: 440)

Filt2 type (0=none, 1=LP, 2=HP, 3=BP, 4=BR, 5=AP)

Filt2freq=<number> (0.000..8000.000, default: 440.000)

Filt2 freq

Filt2q=<number> (0.000..1.000, default: 440.000)

Filt2 q

Filt2resonance=<number> (0.000..1.000, default: 440.000)

Filt2 resonance

Filt2LFO1level=<number> (-500.000..500.000, default: 440.000)

Filt2 LFO1 level

Filt2LFO2level=<number> (-500.000..500.000, default: 440.000)

Filt2 LFO2 level

Filt3type(0=none,1=LP,2=HP,3=BP,4=BR,5=AP)=<number> (default: 440)

Filt3 type (0=none, 1=LP, 2=HP, 3=BP, 4=BR, 5=AP)

Filt3freq=<number> (0.000..8000.000, default: 440.000)

Filt3 freq

Filt3q=<number> (0.000..1.000, default: 440.000)

Filt3 q

Filt3resonance=<number> (0.000..1.000, default: 440.000)

Filt3 resonance

Filt3LFO1level=<number> (-500.000..500.000, default: 440.000)

Filt3 LFO1 level

Filt3LFO2level=<number> (-500.000..500.000, default: 440.000)

Filt3 LFO2 level

Delay1length(s)=<number> (0.000..2.000, default: 440.000)

Delay1 length (s)

Delay1feedback=<number> (0.000..1.000, default: 440.000)

Delay1 feedback

Delay1wetness=<number> (0.000..1.000, default: 440.000)

Delay1 wetness

Delay2length(s)=<number> (0.000..2.000, default: 440.000)

Delay2 length (s)

Delay2feedback=<number> (0.000..1.000, default: 440.000)

Delay2 feedback

Delay2wetness=<number> (0.000..1.000, default: 440.000)

Delay2 wetness

Delay3length(s)=<number> (0.000..2.000, default: 440.000)

Delay3 length (s)

Delay3feedback=<number> (0.000..1.000, default: 440.000)

Delay3 feedback

Delay3wetness=<number> (0.000..1.000, default: 440.000)

Delay3 wetness

Band1gain(dB)=<number> (-70.000..20.000, default: 440.000)

Band 1 gain (dB)

Band2gain(dB)=<number> (-70.000..20.000, default: 440.000)

Band 2 gain (dB)

Band3gain(dB)=<number> (-70.000..20.000, default: 440.000)

Band 3 gain (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_pitchScaleHQ

Pitchco-efficient=<number> (0.500..2.000, default: 0.000)

Pitch co-efficient

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_imp

ImpulseID=<number> (default: 0)

Impulse ID

Highlatencymode=<number> (default: 0)

High latency mode

Gain(dB)=<number> (-90.000..24.000, default: 0.000)

Gain (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_inv

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_karaoke

Vocalvolume(dB)=<number> (-70.000..0.000, default: 0.000)

Vocal volume (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_lcrDelay

Ldelay(ms)=<number> (0.000..2700.000, default: 675.000)

L delay (ms)

Llevel=<number> (0.000..50.000, default: 25.000)

L level

Cdelay(ms)=<number> (0.000..2700.000, default: 675.000)

C delay (ms)

Clevel=<number> (0.000..50.000, default: 25.000)

C level

Rdelay(ms)=<number> (0.000..2700.000, default: 675.000)

R delay (ms)

Rlevel=<number> (0.000..50.000, default: 25.000)

R level

Feedback=<number> (-100.000..100.000, default: 25.000)

Feedback

Highdamp(%)=<number> (0.000..100.000, default: 50.000)

High damp (%)

Lowdamp(%)=<number> (0.000..100.000, default: 50.000)

Low damp (%)

Spread=<number> (0.000..50.000, default: 25.000)

Spread

Dry/Wetlevel=<number> (0.000..1.000, default: 25.000)

Dry/Wet level

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_lfoPhaser

LFOrate(Hz)=<number> (0.000..100.000, default: 25.000)

LFO rate (Hz)

LFOdepth=<number> (0.000..1.000, default: 0.250)

LFO depth

Feedback=<number> (-1.000..1.000, default: 0.250)

Feedback

Spread(octaves)=<number> (0.000..2.000, default: 1.000)

Spread (octaves)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_lsFilter

Filtertype(0=LP,1=BP,2=HP)=<number> (default: 0)

Filter type (0=LP, 1=BP, 2=HP)

Cutofffrequency(Hz)=<number> (0.002..0.500, default: 0.032)

Cutoff frequency (Hz)

Resonance=<number> (0.000..1.000, default: 0.032)

Resonance

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_notch_iir

CenterFrequency(Hz)=<number> (0.000..0.450, default: 0.007)

Center Frequency (Hz)

Bandwidth(Hz)=<number> (0.000..0.450, default: 0.007)

Bandwidth (Hz)

Stages(2polesperstage)=<number> (default: 0)

Stages(2 poles per stage)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_matrixSpatialiser

Width=<number> (default: 0)

Width

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_matrixMSSt

Width=<number> (0.000..2.000, default: 0.000)

Width

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_matrixStMS

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_mbeq

50Hzgain(lowshelving)=<number> (-70.000..30.000, default: 0.000)

50Hz gain (low shelving)

100Hzgain=<number> (-70.000..30.000, default: 0.000)

100Hz gain

156Hzgain=<number> (-70.000..30.000, default: 0.000)

156Hz gain

220Hzgain=<number> (-70.000..30.000, default: 0.000)

220Hz gain

311Hzgain=<number> (-70.000..30.000, default: 0.000)

311Hz gain

440Hzgain=<number> (-70.000..30.000, default: 0.000)

440Hz gain

622Hzgain=<number> (-70.000..30.000, default: 0.000)

622Hz gain

880Hzgain=<number> (-70.000..30.000, default: 0.000)

880Hz gain

1250Hzgain=<number> (-70.000..30.000, default: 0.000)

1250Hz gain

1750Hzgain=<number> (-70.000..30.000, default: 0.000)

1750Hz gain

2500Hzgain=<number> (-70.000..30.000, default: 0.000)

2500Hz gain

3500Hzgain=<number> (-70.000..30.000, default: 0.000)

3500Hz gain

5000Hzgain=<number> (-70.000..30.000, default: 0.000)

5000Hz gain

10000Hzgain=<number> (-70.000..30.000, default: 0.000)

10000Hz gain

20000Hzgain=<number> (-70.000..30.000, default: 0.000)

20000Hz gain

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_multivoiceChorus

Numberofvoices=<number> (default: 0)

Number of voices

Delaybase(ms)=<number> (10.000..40.000, default: 10.000)

Delay base (ms)

Voiceseparation(ms)=<number> (0.000..2.000, default: 0.500)

Voice separation (ms)

Detune(%)=<number> (0.000..5.000, default: 0.500)

Detune (%)

LFOfrequency(Hz)=<number> (2.000..30.000, default: 9.000)

LFO frequency (Hz)

Outputattenuation(dB)=<number> (-20.000..0.000, default: 9.000)

Output attenuation (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_pitchScale

Pitchco-efficient=<number> (0.500..2.000, default: 0.000)

Pitch co-efficient

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_pointerCastDistortion

Effectcutofffreq(Hz)=<number> (0.000..0.300, default: 0.001)

Effect cutoff freq (Hz)

Dry/wetmix=<number> (0.000..1.000, default: 0.001)

Dry/wet mix

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_rateShifter

Rate=<number> (-4.000..4.000, default: 0.000)

Rate

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_retroFlange

Averagestall(ms)=<number> (0.000..10.000, default: 2.500)

Average stall (ms)

Flangefrequency(Hz)=<number> (0.500..8.000, default: 2.500)

Flange frequency (Hz)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_revdelay

DelayTime(s)=<number> (0.000..5.000, default: 0.000)

Delay Time (s)

DryLevel(dB)=<number> (-70.000..0.000, default: 0.000)

Dry Level (dB)

WetLevel(dB)=<number> (-70.000..0.000, default: 0.000)

Wet Level (dB)

Feedback=<number> (0.000..1.000, default: 0.000)

Feedback

Crossfadesamples=<number> (default: 1250)

Crossfade samples

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_ringmod_1i1o1l

Modulationdepth(0=none,1=AM,2=RM)=<number> (0.000..2.000, default: 0.000)

Modulation depth (0=none, 1=AM, 2=RM)

Frequency(Hz)=<number> (1.000..1000.000, default: 440.000)

Frequency (Hz)

Sinelevel=<number> (-1.000..1.000, default: 440.000)

Sine level

Trianglelevel=<number> (-1.000..1.000, default: 440.000)

Triangle level

Sawtoothlevel=<number> (-1.000..1.000, default: 440.000)

Sawtooth level

Squarelevel=<number> (-1.000..1.000, default: 440.000)

Square level

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_sc1

Attacktime(ms)=<number> (2.000..400.000, default: 101.500)

Attack time (ms)

Releasetime(ms)=<number> (2.000..800.000, default: 401.000)

Release time (ms)

Thresholdlevel(dB)=<number> (-30.000..0.000, default: 0.000)

Threshold level (dB)

Ratio(1:n)=<number> (1.000..10.000, default: 0.000)

Ratio (1:n)

Kneeradius(dB)=<number> (1.000..10.000, default: 3.250)

Knee radius (dB)

Makeupgain(dB)=<number> (0.000..24.000, default: 3.250)

Makeup gain (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_sc4

RMS/peak=<number> (0.000..1.000, default: 0.000)

RMS/peak

Attacktime(ms)=<number> (1.500..400.000, default: 101.125)

Attack time (ms)

Releasetime(ms)=<number> (2.000..800.000, default: 401.000)

Release time (ms)

Thresholdlevel(dB)=<number> (-30.000..0.000, default: 0.000)

Threshold level (dB)

Ratio(1:n)=<number> (1.000..20.000, default: 0.000)

Ratio (1:n)

Kneeradius(dB)=<number> (1.000..10.000, default: 3.250)

Knee radius (dB)

Makeupgain(dB)=<number> (0.000..24.000, default: 3.250)

Makeup gain (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_sc4m

RMS/peak=<number> (0.000..1.000, default: 0.000)

RMS/peak

Attacktime(ms)=<number> (1.500..400.000, default: 101.125)

Attack time (ms)

Releasetime(ms)=<number> (2.000..800.000, default: 401.000)

Release time (ms)

Thresholdlevel(dB)=<number> (-30.000..0.000, default: 0.000)

Threshold level (dB)

Ratio(1:n)=<number> (1.000..20.000, default: 0.000)

Ratio (1:n)

Kneeradius(dB)=<number> (1.000..10.000, default: 3.250)

Knee radius (dB)

Makeupgain(dB)=<number> (0.000..24.000, default: 3.250)

Makeup gain (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_se4

RMS/peak=<number> (0.000..1.000, default: 0.000)

RMS/peak

Attacktime(ms)=<number> (1.500..400.000, default: 101.125)

Attack time (ms)

Releasetime(ms)=<number> (2.000..800.000, default: 401.000)

Release time (ms)

Thresholdlevel(dB)=<number> (-30.000..0.000, default: 0.000)

Threshold level (dB)

Ratio(1:n)=<number> (1.000..20.000, default: 0.000)

Ratio (1:n)

Kneeradius(dB)=<number> (1.000..10.000, default: 3.250)

Knee radius (dB)

Attenuation(dB)=<number> (-24.000..0.000, default: 3.250)

Attenuation (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_sifter

Siftsize=<number> (1.000..1000.000, default: 0.000)

Sift size

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_amp

Ampsgain(dB)=<number> (-70.000..70.000, default: 0.000)

Amps gain (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_delay_c

MaxDelay(s)=<number> (default: 0.000)

Max Delay (s)

DelayTime(s)=<number> (default: 0.000)

Delay Time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_delay_l

MaxDelay(s)=<number> (default: 0.000)

Max Delay (s)

DelayTime(s)=<number> (default: 0.000)

Delay Time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_delay_n

MaxDelay(s)=<number> (default: 0.000)

Max Delay (s)

DelayTime(s)=<number> (default: 0.000)

Delay Time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_singlePara

Gain(dB)=<number> (-70.000..30.000, default: 0.000)

Gain (dB)

Frequency(Hz)=<number> (0.000..0.400, default: 440.000)

Frequency (Hz)

Bandwidth(octaves)=<number> (0.000..4.000, default: 440.000)

Bandwidth (octaves)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_sinusWavewrapper

Wrapdegree=<number> (0.000..10.000, default: 0.000)

Wrap degree

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_smoothDecimate

Resamplerate=<number> (0.000..1.000, default: 1.000)

Resample rate

Smoothing=<number> (0.000..1.000, default: 1.000)

Smoothing

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_svf

Filtertype(0=none,1=LP,2=HP,3=BP,4=BR,5=AP)=<number> (default: 0)

Filter type (0=none, 1=LP, 2=HP, 3=BP, 4=BR, 5=AP)

Filterfreq=<number> (0.000..6000.000, default: 440.000)

Filter freq

FilterQ=<number> (0.000..1.000, default: 0.250)

Filter Q

Filterresonance=<number> (0.000..1.000, default: 0.250)

Filter resonance

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_tap_autopan

Frequency[Hz]=<number> (0.000..20.000, default: 0.000)

Frequency [Hz]

Depth[%]=<number> (0.000..100.000, default: 0.000)

Depth [%]

Gain[dB]=<number> (-70.000..20.000, default: 0.000)

Gain [dB]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_tap_chorusflanger

Frequency[Hz]=<number> (0.000..5.000, default: 1.250)

Frequency [Hz]

L/RPhaseShift[deg]=<number> (0.000..180.000, default: 90.000)

L/R Phase Shift [deg]

Depth[%]=<number> (0.000..100.000, default: 75.000)

Depth [%]

Delay[ms]=<number> (0.000..100.000, default: 25.000)

Delay [ms]

Contour[Hz]=<number> (20.000..20000.000, default: 100.000)

Contour [Hz]

DryLevel[dB]=<number> (-90.000..20.000, default: 100.000)

Dry Level [dB]

WetLevel[dB]=<number> (-90.000..20.000, default: 100.000)

Wet Level [dB]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_tap_deesser

ThresholdLevel[dB]=<number> (-50.000..10.000, default: 0.000)

Threshold Level [dB]

Frequency[Hz]=<number> (2000.000..16000.000, default: 5500.000)

Frequency [Hz]

SidechainFilter=<number> (default: 5500)

Sidechain Filter

Monitor=<number> (default: 5500)

Monitor

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_tap_dynamics_m

Attack[ms]=<number> (4.000..500.000, default: 128.000)

Attack [ms]

Release[ms]=<number> (4.000..1000.000, default: 502.000)

Release [ms]

OffsetGain[dB]=<number> (-20.000..20.000, default: 502.000)

Offset Gain [dB]

MakeupGain[dB]=<number> (-20.000..20.000, default: 502.000)

Makeup Gain [dB]

Function=<number> (default: 502)

Function

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_tap_dynamics_st

Attack[ms]=<number> (4.000..500.000, default: 128.000)

Attack [ms]

Release[ms]=<number> (4.000..1000.000, default: 502.000)

Release [ms]

OffsetGain[dB]=<number> (-20.000..20.000, default: 502.000)

Offset Gain [dB]

MakeupGain[dB]=<number> (-20.000..20.000, default: 502.000)

Makeup Gain [dB]

StereoMode=<number> (default: 502)

Stereo Mode

Function=<number> (default: 502)

Function

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_tap_equalizer

Band1Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 1 Gain [dB]

Band2Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 2 Gain [dB]

Band3Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 3 Gain [dB]

Band4Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 4 Gain [dB]

Band5Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 5 Gain [dB]

Band6Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 6 Gain [dB]

Band7Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 7 Gain [dB]

Band8Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 8 Gain [dB]

Band1Freq[Hz]=<number> (40.000..280.000, default: 100.000)

Band 1 Freq [Hz]

Band2Freq[Hz]=<number> (100.000..500.000, default: 200.000)

Band 2 Freq [Hz]

Band3Freq[Hz]=<number> (200.000..1000.000, default: 400.000)

Band 3 Freq [Hz]

Band4Freq[Hz]=<number> (400.000..2800.000, default: 1000.000)

Band 4 Freq [Hz]

Band5Freq[Hz]=<number> (1000.000..5000.000, default: 3000.000)

Band 5 Freq [Hz]

Band6Freq[Hz]=<number> (3000.000..9000.000, default: 6000.000)

Band 6 Freq [Hz]

Band7Freq[Hz]=<number> (6000.000..18000.000, default: 12000.000)

Band 7 Freq [Hz]

Band8Freq[Hz]=<number> (10000.000..20000.000, default: 15000.000)

Band 8 Freq [Hz]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_tap_equalizer_bw

Band1Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 1 Gain [dB]

Band2Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 2 Gain [dB]

Band3Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 3 Gain [dB]

Band4Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 4 Gain [dB]

Band5Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 5 Gain [dB]

Band6Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 6 Gain [dB]

Band7Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 7 Gain [dB]

Band8Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 8 Gain [dB]

Band1Freq[Hz]=<number> (40.000..280.000, default: 100.000)

Band 1 Freq [Hz]

Band2Freq[Hz]=<number> (100.000..500.000, default: 200.000)

Band 2 Freq [Hz]

Band3Freq[Hz]=<number> (200.000..1000.000, default: 400.000)

Band 3 Freq [Hz]

Band4Freq[Hz]=<number> (400.000..2800.000, default: 1000.000)

Band 4 Freq [Hz]

Band5Freq[Hz]=<number> (1000.000..5000.000, default: 3000.000)

Band 5 Freq [Hz]

Band6Freq[Hz]=<number> (3000.000..9000.000, default: 6000.000)

Band 6 Freq [Hz]

Band7Freq[Hz]=<number> (6000.000..18000.000, default: 12000.000)

Band 7 Freq [Hz]

Band8Freq[Hz]=<number> (10000.000..20000.000, default: 15000.000)

Band 8 Freq [Hz]

Band1Bandwidth[octaves]=<number> (0.100..5.000, default: 15000.000)

Band 1 Bandwidth [octaves]

Band2Bandwidth[octaves]=<number> (0.100..5.000, default: 15000.000)

Band 2 Bandwidth [octaves]

Band3Bandwidth[octaves]=<number> (0.100..5.000, default: 15000.000)

Band 3 Bandwidth [octaves]

Band4Bandwidth[octaves]=<number> (0.100..5.000, default: 15000.000)

Band 4 Bandwidth [octaves]

Band5Bandwidth[octaves]=<number> (0.100..5.000, default: 15000.000)

Band 5 Bandwidth [octaves]

Band6Bandwidth[octaves]=<number> (0.100..5.000, default: 15000.000)

Band 6 Bandwidth [octaves]

Band7Bandwidth[octaves]=<number> (0.100..5.000, default: 15000.000)

Band 7 Bandwidth [octaves]

Band8Bandwidth[octaves]=<number> (0.100..5.000, default: 15000.000)

Band 8 Bandwidth [octaves]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_tap_doubler

TimeTracking=<number> (0.000..1.000, default: 0.500)

Time Tracking

PitchTracking=<number> (0.000..1.000, default: 0.500)

Pitch Tracking

DryLevel[dB]=<number> (-90.000..20.000, default: 0.500)

Dry Level [dB]

DryLeftPosition=<number> (0.000..1.000, default: 0.000)

Dry Left Position

DryRightPosition=<number> (0.000..1.000, default: 1.000)

Dry Right Position

WetLevel[dB]=<number> (-90.000..20.000, default: 1.000)

Wet Level [dB]

WetLeftPosition=<number> (0.000..1.000, default: 0.000)

Wet Left Position

WetRightPosition=<number> (0.000..1.000, default: 1.000)

Wet Right Position

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_tap_pinknoise

FractalDimension=<number> (0.000..1.000, default: 0.500)

Fractal Dimension

SignalLevel[dB]=<number> (-90.000..20.000, default: 0.500)

Signal Level [dB]

NoiseLevel[dB]=<number> (-90.000..20.000, default: -90.000)

Noise Level [dB]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_tap_pitch

SemitoneShift=<number> (-12.000..12.000, default: 0.000)

Semitone Shift

RateShift[%]=<number> (-50.000..100.000, default: 0.000)

Rate Shift [%]

DryLevel[dB]=<number> (-90.000..20.000, default: -90.000)

Dry Level [dB]

WetLevel[dB]=<number> (-90.000..20.000, default: -90.000)

Wet Level [dB]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_tap_reflector

FragmentLength[ms]=<number> (20.000..1600.000, default: 415.000)

Fragment Length [ms]

DryLevel[dB]=<number> (-90.000..20.000, default: -90.000)

Dry Level [dB]

WetLevel[dB]=<number> (-90.000..20.000, default: -90.000)

Wet Level [dB]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_tap_reverb

Decay[ms]=<number> (0.000..10000.000, default: 2500.000)

Decay [ms]

DryLevel[dB]=<number> (-70.000..10.000, default: 2500.000)

Dry Level [dB]

WetLevel[dB]=<number> (-70.000..10.000, default: 2500.000)

Wet Level [dB]

CombFilters=[1|0] (default: 2500)

Comb Filters

AllpassFilters=[1|0] (default: 2500)

Allpass Filters

BandpassFilter=[1|0] (default: 2500)

Bandpass Filter

EnhancedStereo=[1|0] (default: 2500)

Enhanced Stereo

ReverbType=<number> (default: 2500)

Reverb Type

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_tap_rotspeak

RotorFrequency[Hz]=<number> (0.000..30.000, default: 0.000)

Rotor Frequency [Hz]

HornFrequency[Hz]=<number> (0.000..30.000, default: 0.000)

Horn Frequency [Hz]

MicDistance[%]=<number> (0.000..100.000, default: 25.000)

Mic Distance [%]

Rotor/HornMix=<number> (0.000..1.000, default: 0.500)

Rotor/Horn Mix

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_tap_limiter

LimitLevel[dB]=<number> (-30.000..20.000, default: 0.000)

Limit Level [dB]

OutputVolume[dB]=<number> (-30.000..20.000, default: 0.000)

Output Volume [dB]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_tap_sigmoid

PreGain[dB]=<number> (-90.000..20.000, default: 0.000)

Pre Gain [dB]

PostGain[dB]=<number> (-90.000..20.000, default: 0.000)

Post Gain [dB]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_tap_stereo_echo

LDelay[ms]=<number> (0.000..2000.000, default: 100.000)

L Delay [ms]

LFeedback[%]=<number> (0.000..100.000, default: 100.000)

L Feedback [%]

R/HaasDelay[ms]=<number> (0.000..2000.000, default: 100.000)

R/Haas Delay [ms]

R/HaasFeedback[%]=<number> (0.000..100.000, default: 100.000)

R/Haas Feedback [%]

LEchoLevel[dB]=<number> (-70.000..10.000, default: 100.000)

L Echo Level [dB]

REchoLevel[dB]=<number> (-70.000..10.000, default: 100.000)

R Echo Level [dB]

DryLevel[dB]=<number> (-70.000..10.000, default: 100.000)

Dry Level [dB]

CrossMode=[1|0] (default: 100)

Cross Mode

HaasEffect=[1|0] (default: 100)

Haas Effect

SwapOutputs=[1|0] (default: 100)

Swap Outputs

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_tap_tremolo

Frequency[Hz]=<number> (0.000..20.000, default: 0.000)

Frequency [Hz]

Depth[%]=<number> (0.000..100.000, default: 0.000)

Depth [%]

Gain[dB]=<number> (-70.000..20.000, default: 0.000)

Gain [dB]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_tap_tubewarmth

Drive=<number> (0.100..10.000, default: 2.575)

Drive

Tape--TubeBlend=<number> (-10.000..10.000, default: 10.000)

Tape--Tube Blend

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_tap_vibrato

Frequency[Hz]=<number> (0.000..30.000, default: 0.000)

Frequency [Hz]

Depth[%]=<number> (0.000..20.000, default: 0.000)

Depth [%]

DryLevel[dB]=<number> (-90.000..20.000, default: -90.000)

Dry Level [dB]

WetLevel[dB]=<number> (-90.000..20.000, default: -90.000)

Wet Level [dB]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_tapeDelay

Tapespeed(inches/sec,1=normal)=<number> (0.000..10.000, default: 0.000)

Tape speed (inches/sec, 1=normal)

Drylevel(dB)=<number> (-90.000..0.000, default: -90.000)

Dry level (dB)

Tap1distance(inches)=<number> (0.000..4.000, default: -90.000)

Tap 1 distance (inches)

Tap1level(dB)=<number> (-90.000..0.000, default: -90.000)

Tap 1 level (dB)

Tap2distance(inches)=<number> (0.000..4.000, default: 1.000)

Tap 2 distance (inches)

Tap2level(dB)=<number> (-90.000..0.000, default: -90.000)

Tap 2 level (dB)

Tap3distance(inches)=<number> (0.000..4.000, default: 2.000)

Tap 3 distance (inches)

Tap3level(dB)=<number> (-90.000..0.000, default: -90.000)

Tap 3 level (dB)

Tap4distance(inches)=<number> (0.000..4.000, default: 3.000)

Tap 4 distance (inches)

Tap4level(dB)=<number> (-90.000..0.000, default: -90.000)

Tap 4 level (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_transient

Attackspeed=<number> (-1.000..1.000, default: 0.000)

Attack speed

Sustaintime=<number> (-1.000..1.000, default: 0.000)

Sustain time

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_triplePara

Low-shelvinggain(dB)=<number> (-70.000..30.000, default: 0.000)

Low-shelving gain (dB)

Low-shelvingfrequency(Hz)=<number> (0.000..0.490, default: 0.000)

Low-shelving frequency (Hz)

Low-shelvingslope=<number> (0.000..1.000, default: 0.500)

Low-shelving slope

Band1gain(dB)=<number> (-70.000..30.000, default: 0.500)

Band 1 gain (dB)

Band1frequency(Hz)=<number> (0.000..0.490, default: 0.001)

Band 1 frequency (Hz)

Band1bandwidth(octaves)=<number> (0.000..4.000, default: 0.001)

Band 1 bandwidth (octaves)

Band2gain(dB)=<number> (-70.000..30.000, default: 0.001)

Band 2 gain (dB)

Band2frequency(Hz)=<number> (0.000..0.490, default: 0.007)

Band 2 frequency (Hz)

Band2bandwidth(octaves)=<number> (0.000..4.000, default: 0.007)

Band 2 bandwidth (octaves)

Band3gain(dB)=<number> (-70.000..30.000, default: 0.007)

Band 3 gain (dB)

Band3frequency(Hz)=<number> (0.000..0.490, default: 0.059)

Band 3 frequency (Hz)

Band3bandwidth(octaves)=<number> (0.000..4.000, default: 0.059)

Band 3 bandwidth (octaves)

High-shelvinggain(dB)=<number> (-70.000..30.000, default: 0.059)

High-shelving gain (dB)

High-shelvingfrequency(Hz)=<number> (0.000..0.490, default: 0.490)

High-shelving frequency (Hz)

High-shelvingslope=<number> (0.000..1.000, default: 0.500)

High-shelving slope

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_valveRect

Saglevel=<number> (0.000..1.000, default: 0.000)

Sag level

Distortion=<number> (0.000..1.000, default: 0.000)

Distortion

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_valve

Distortionlevel=<number> (0.000..1.000, default: 0.000)

Distortion level

Distortioncharacter=<number> (0.000..1.000, default: 0.000)

Distortion character

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_vocoder

Numberofbands=<number> (default: 0)

Number of bands

Left/Right=<number> (default: 0)

Left/Right

Band1Level=<number> (0.000..1.000, default: 0.000)

Band 1 Level

Band2Level=<number> (0.000..1.000, default: 0.000)

Band 2 Level

Band3Level=<number> (0.000..1.000, default: 0.000)

Band 3 Level

Band4Level=<number> (0.000..1.000, default: 0.000)

Band 4 Level

Band5Level=<number> (0.000..1.000, default: 0.000)

Band 5 Level

Band6Level=<number> (0.000..1.000, default: 0.000)

Band 6 Level

Band7Level=<number> (0.000..1.000, default: 0.000)

Band 7 Level

Band8Level=<number> (0.000..1.000, default: 0.000)

Band 8 Level

Band9Level=<number> (0.000..1.000, default: 0.000)

Band 9 Level

Band10Level=<number> (0.000..1.000, default: 0.000)

Band 10 Level

Band11Level=<number> (0.000..1.000, default: 0.000)

Band 11 Level

Band12Level=<number> (0.000..1.000, default: 0.000)

Band 12 Level

Band13Level=<number> (0.000..1.000, default: 0.000)

Band 13 Level

Band14Level=<number> (0.000..1.000, default: 0.000)

Band 14 Level

Band15Level=<number> (0.000..1.000, default: 0.000)

Band 15 Level

Band16Level=<number> (0.000..1.000, default: 0.000)

Band 16 Level

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_volume

volume=<number> (-90.00..20.00, default: 0.00)

Volume

Suboptions for fa_ladspa_vynil

Year=<number> (1900.000..1990.000, default: 1990.000)

Year

RPM=<number> (33.000..78.000, default: 33.000)

RPM

Surfacewarping=<number> (0.000..1.000, default: 33.000)

Surface warping

Crackle=<number> (0.000..1.000, default: 33.000)

Crackle

Wear=<number> (0.000..1.000, default: 33.000)

Wear

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_shaper

Waveshape=<number> (-10.000..10.000, default: 0.000)

Waveshape

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Suboptions for fa_ladspa_zm1

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

-vf <video filter options>

Set video filter options
f={option[{suboptions}][:option[{suboptions}]...]}

Supported options: fv_onedtv fv_agingtv fv_baltantv fv_blur fv_brokentv fv_burningtv fv_chameleontv fv_colorbalance fv_colstreaktv fv_cropscale fv_cycletv fv_decimate fv_deinterlace fv_dicetv fv_difftv fv_tcdisplay fv_displaywalltv fv_dottv fv_edgetv fv_edgeblurtv fv_equalizer fv_firetv fv_flip fv_framerate fv_pixelformat fv_interlace fv_invert fv_lenstv fv_lifetv fv_matrixtv fv_mosaictv fv_halftv fv_nervoustv fv_noisetv fv_oldcolor fv_optv fv_puptv fv_quarktv fv_colormatrix_rgb fv_rdstv fv_revtv fv_rippletv fv_rndmtv fv_shagadelictv fv_shift fv_simuratv fv_slofasttv fv_sparktv fv_spiraltv fv_streaktv fv_swapfields fv_tlp fv_textlogo fv_timedisttv fv_transform fv_transformtv fv_tctweak fv_vertigotv fv_warholtv fv_warptv fv_colormatrix_yuv fv_zoom

Video Filters

Suboptions for fv_blur

mode=<string>

Supported strings: gauss triangular box

Default: gauss

Mode

radius_h=<number> (0.5..50.0, default: 0.5)

Horizontal radius

radius_v=<number> (0.5..50.0, default: 0.5)

Vertical radius

blur_chroma=[1|0] (default: 0)

Blur chroma planes

correct_nonsquare=[1|0] (default: 0)

Correct radii for nonsquare pixels

Suboptions for fv_burningtv

mode=<string>

Supported strings: fg all

Default: all

Mode

Suboptions for fv_chameleontv

mode=<string>

Supported strings: app disapp

Default: disapp

Mode

Suboptions for fv_colorbalance

r=<number> (0.00..2.00, default: 1.00)

Red gain

g=<number> (0.00..2.00, default: 1.00)

Green gain

b=<number> (0.00..2.00, default: 1.00)

Blue gain

n=[1|0] (default: 0)

Normalize

Normalize for constant luminance.

Suboptions for fv_colstreaktv

blendnum=<number> (1..10, default: 4)

Blend num

Suboptions for fv_cropscale

crl=<number> (0.000..100000.000, default: 0.000)

Crop left

Cut this many pixels from the left border of the source images.

crr=<number> (0.000..100000.000, default: 0.000)

Crop right

Cut this many pixels from the right border of the source images.

crt=<number> (0.000..100000.000, default: 0.000)

Crop top

Cut this many pixels from the top border of the source images.

crb=<number> (0.000..100000.000, default: 0.000)

Crop bottom

Cut this many pixels from the bottom border of the source images.

s=<string>

Supported strings: from_input user_defined pal_d1 pal_d1_wide pal_dv pal_dv_wide pal_cvd pal_vcd pal_svcd pal_svcd_wide ntsc_d1 ntsc_d1_wide ntsc_dv ntsc_dv_wide ntsc_cvd ntsc_vcd ntsc_svcd ntsc_svcd_wide 720 1080 vga qvga sqcif qcif cif 4cif 16cif

Default: from_input

Image size

Set the output image size. For a user defined size, you must specify the width and height as well as the pixel width and pixel height.

w=<number> (1..100000, default: 640)

User defined width

User defined width in pixels. Only meaningful if you selected "User defined" for the image size.

h=<number> (1..100000, default: 480)

User defined height

User defined height in pixels. Only meaningful if you selected "User defined" for the image size.

sw=<number> (1..100000, default: 1)

User defined pixel width

User defined pixel width. Only meaningful if you selected "User defined" for the image size.

sh=<number> (1..100000, default: 1)

User defined pixel height

User defined pixel height. Only meaningful if you selected "User defined" for the image size.

ka=[1|0] (default: 1)

Maintain aspect ratio

Let the aspect ratio appear the same as in the source, probably resulting in additional borders.

bc=<r>,<g>,<b> (default: 0.000,0.000,0.000)

<r>, <g> and <b> are in the range 0.0..1.0

Border color

Color of the image borders.

squeeze=<number> (-1.000..1.000, default: 0.000)

Squeeze

zoom=<number> (20..180, default: 100)

Zoom

sm=<string>

Supported strings: auto nearest bilinear quadratic cubic_bspline cubic_mitchell cubic_catmull sinc_lanczos

Default: auto

Scale mode

Choose scaling method. Auto means to choose based on the conversion quality. Nearest is fastest, Sinc with Lanczos window is slowest.

so=<number> (4..1000, default: 4)

Scale order

Order for sinc scaling

downscale_filter=<string>

Supported strings: auto none wide gauss

Default: auto

Antialiasing for downscaling

Specifies the antialiasing filter to be used when downscaling images.

downscale_blur=<number> (0.00..2.00, default: 1.00)

Blur factor for downscaling

Specifies how much blurring should be applied when downscaling. Smaller values can speed up scaling, but might result in strong aliasing.

chroma_output=<string>

Supported strings: from_input 444 422 420mpeg1 420mpeg2 420paldv 411

Default: from_input

Chroma output

Set the output chroma format to that of the destination. This can save one chroma scaling operation at a later stage. It only works if the input pixelformat is otherwise compatible to the output.

deinterlace=<string>

Supported strings: never auto always

Default: never

Deinterlace

ddm=<string>

Supported strings: top bottom

Default: top

Drop mode

Specifies which field the deinterlacer should drop.

Suboptions for fv_decimate

threshold_block=<number> (0.00..1.00, default: 0.00)

Block threshold

Specifies how much a block may differ from the last non-skipped block. 0 means identical blocks, 1 means completely different blocks. Note that the meaning of "completely different" depends on the colorspace.

threshold_total=<number> (0.00..1.00, default: 0.00)

Total threshold

Specifies how much a frame may differ from the last non-skipped frame. 0 means identical frames, 1 means completely different frames. Note that the meaning of "completely different" depends on the colorspace.

skip_max=<number> (1..500, default: 10)

Maximum skipped frames

Maximum number of consecutive skipped frames

do_log=[1|0] (default: 0)

Report results

Log reports about skipped frames

Suboptions for fv_deinterlace

method=<string>

Supported strings: none copy scale_hw scale_sw blend yadif yadif_fast

Default: none

Method

force=[1|0] (default: 0)

Force deinterlacing

Always perform deinterlacing even if the source format pretends to be progressive

output_mode=<string>

Supported strings: top bottom first second both

Default: top

Output mode

Specify which field to output. Outputting both fields is not always supported.

sm=<string>

Supported strings: auto nearest bilinear quadratic cubic_bspline cubic_mitchell cubic_catmull sinc_lanczos

Default: auto

Scale mode

Choose scaling method. Auto means to choose based on the conversion quality. Nearest is fastest, Sinc with Lanczos window is slowest.

so=<number> (4..1000, default: 4)

Scale order

Order for sinc scaling

Suboptions for fv_dicetv

g_cube_bits=<number> (0..5, default: 4)

Square Size

Suboptions for fv_difftv

tolerance=<number> (0..255, default: 10)

Tolerance

Suboptions for fv_tcdisplay

interpolate=[1|0] (default: 1)

Interpolate missing

Interpolate missing timecodes

color=<r>,<g>,<b>,<a> (default: 1.000,1.000,1.000,1.000)

<r>, <g>, <b> and <a> are in the range 0.0..1.0

Text color

border_color=<r>,<g>,<b> (default: 0.000,0.000,0.000)

<r>, <g> and <b> are in the range 0.0..1.0

Border color

border_width=<number> (0.00..10.00, default: 2.00)

Border width

font=<string> (Default: Courier-20)

Font

justify_h=<string>

Supported strings: center left right

Default: right

Horizontal justify

justify_v=<string>

Supported strings: center top bottom

Default: top

Vertical justify

border_left=<number> (0..65535, default: 10)

Left border

Distance from the left text border to the image border

border_right=<number> (0..65535, default: 10)

Right border

Distance from the right text border to the image border

border_top=<number> (0..65535, default: 10)

Top border

Distance from the top text border to the image border

border_bottom=<number> (0..65535, default: 10)

Bottom border

Distance from the bottom text border to the image border

Suboptions for fv_displaywalltv

scale=<number> (1..9, default: 3)

Scale

speedx=<number> (-100..100, default: 10)

Horizontal scroll speed

speedy=<number> (-100..100, default: 10)

Vertical scroll speed

Suboptions for fv_dottv

mode=<string>

Supported strings: dots hearts

Default: dots

Mode

Suboptions for fv_edgeblurtv

color=<r>,<g>,<b> (default: 1.000,1.000,1.000)

<r>, <g> and <b> are in the range 0.0..1.0

Color

Suboptions for fv_equalizer

brightness=<number> (-10.0..10.0, default: 0.0)

Brightness

contrast=<number> (-10.0..10.0, default: 0.0)

Contrast

saturation=<number> (-10.0..10.0, default: 0.0)

Saturation

hue=<number> (-180.0..180.0, default: 0.0)

Hue

Suboptions for fv_firetv

mode=<string>

Supported strings: fg light dark

Default: all

Mode

Suboptions for fv_flip

flip_h=[1|0] (default: 0)

Flip horizontally

flip_v=[1|0] (default: 0)

Flip vertically

Suboptions for fv_framerate

framerate=<string>

Supported strings: from_source user_defined 23_976 24 25 29_970 30 50 59_940 60

Default: from_source

Framerate

Output framerate. For user defined framerate, enter the timescale and frame duration below (framerate = timescale / frame duration).

timescale=<number> (1..100000, default: 25)

Timescale

Timescale for user defined output framerate (Framerate = timescale / frame duration).

frame_duration=<number> (1..100000, default: 1)

Frame duration

Frame duration for user defined output framerate (Framerate = timescale / frame duration).

Suboptions for fv_pixelformat

fmt=<string>

Supported strings: gray8 gray16 grayf graya16 graya32 grayaf rgb15 bgr15 rgb16 bgr16 rgb24 bgr24 rgb32 bgr32 rgba32 rgb48 rgba64 rgbf rgbaf yuy2 uyvy yuva32 yuva64 yuvaf yuv444pf yuv420p8 yuv410p8 yuv411p8 yuv422p8 yuv422p16 yuv444p8 yuv444p16 yuvj420p8 yuvj422p8

Default: yuv420p8

Pixelformat

Suboptions for fv_interlace

field_order=<string>

Supported strings: top bottom

Default: top

Output field order

Suboptions for fv_invert

r=[1|0] (default: 1)

Invert red

g=[1|0] (default: 1)

Invert green

b=[1|0] (default: 1)

Invert blue

a=[1|0] (default: 1)

Invert alpha

Suboptions for fv_lenstv

x=<number> (0.00..1.00, default: 0.25)

X

y=<number> (0.00..1.00, default: 0.25)

Y

lens_width=<number> (0.00..1.00, default: 0.25)

Diameter

lens_zoom=<number> (5..200, default: 30)

Zoom

Suboptions for fv_matrixtv

mode=[1|0] (default: 0)

Blend

Suboptions for fv_halftv

mode=<string>

Supported strings: delay scratch nervous

Default: delay

Mode

direction=<string>

Supported strings: left right top bottom

Default: right

Direction

mirror=<string>

Supported strings: normal mirror copy

Default: mirror

Mirror

delay=<number> (0..31, default: 10)

Delay

Suboptions for fv_nervoustv

mode=<string>

Supported strings: random scratch

Default: random

Mode

Suboptions for fv_oldcolor

style=<string>

Supported strings: bw tech1 tech2

Default: tech1

Style

strength=<number> (0.000..1.000, default: 1.000)

Strength

r_gain=<number> (0.000..2.000, default: 1.000)

Red gain

g_gain=<number> (0.000..2.000, default: 1.000)

Green gain

b_gain=<number> (0.000..2.000, default: 1.000)

Blue gain

Suboptions for fv_optv

mode=<string>

Supported strings: maelstrom radiation perspective vertical

Default: maelstrom

Mode

speed=<number> (-64..64, default: 16)

Speed

Suboptions for fv_puptv

mode=<string>

Supported strings: horizontal vertical diagonal dissolution random raster

Default: horizontal

Mode

strength=<number> (0.00..1.00, default: 0.20)

Strength

Suboptions for fv_colormatrix_rgb

r_to_r=<number> (-2.000..2.000, default: 1.000)

Red -> Red

g_to_r=<number> (-2.000..2.000, default: 0.000)

Green -> Red

b_to_r=<number> (-2.000..2.000, default: 0.000)

Blue -> Red

a_to_r=<number> (-2.000..2.000, default: 0.000)

Alpha -> Red

off_r=<number> (-2.000..2.000, default: 0.000)

Red offset

r_to_g=<number> (-2.000..2.000, default: 0.000)

Red -> Green

g_to_g=<number> (-2.000..2.000, default: 1.000)

Green -> Green

b_to_g=<number> (-2.000..2.000, default: 0.000)

Blue -> Green

a_to_g=<number> (-2.000..2.000, default: 0.000)

Alpha -> Green

off_g=<number> (-2.000..2.000, default: 0.000)

Green offset

r_to_b=<number> (-2.000..2.000, default: 0.000)

Red -> Blue

g_to_b=<number> (-2.000..2.000, default: 0.000)

Green -> Blue

b_to_b=<number> (-2.000..2.000, default: 1.000)

Blue -> Blue

a_to_b=<number> (-2.000..2.000, default: 0.000)

Alpha -> Blue

off_b=<number> (-2.000..2.000, default: 0.000)

Blue offset

r_to_a=<number> (-2.000..2.000, default: 0.000)

Red -> Alpha

g_to_a=<number> (-2.000..2.000, default: 0.000)

Green -> Alpha

b_to_a=<number> (-2.000..2.000, default: 0.000)

Blue -> Alpha

a_to_a=<number> (-2.000..2.000, default: 1.000)

Alpha -> Alpha

off_a=<number> (-2.000..2.000, default: 0.000)

Alpha offset

force_alpha=[1|0] (default: 0)

Force alpha

Create video with alpha channel even if the input format has no alpha channel. Use this to generate the alpha channel from other channels using the colormatrix.

Suboptions for fv_rdstv

method=<string>

Supported strings: wall cross

Default: wall

Method

Suboptions for fv_revtv

fg_color=<r>,<g>,<b> (default: 1.000,1.000,1.000)

<r>, <g> and <b> are in the range 0.0..1.0

Line color

bg_color=<r>,<g>,<b> (default: 0.000,0.000,0.000)

<r>, <g> and <b> are in the range 0.0..1.0

Background

spacing=<number> (0.000..1.000, default: 0.100)

Spacing

amplitude=<number> (0.00..1.00, default: 0.10)

Amplitude

vgrabtime=<number> (1..10, default: 1)

Grab interval

Suboptions for fv_rippletv

mode=<string>

Supported strings: motion rain

Default: motion

Mode

loopnum=<number> (1..5, default: 2)

Speed

strength=<number> (1..10, default: 8)

Strength

decay_cfg=<number> (1..15, default: 8)

Decay

Suboptions for fv_rndmtv

rmode=[1|0] (default: 1)

Color

Suboptions for fv_shagadelictv

mask_r=[1|0] (default: 1)

Red mask

mask_g=[1|0] (default: 1)

Green mask

mask_b=[1|0] (default: 1)

Blue mask

Suboptions for fv_shift

shift=<number> (0..8, default: 0)

Bits to shift

Suboptions for fv_simuratv

color=<r>,<g>,<b> (default: 0.000,0.000,0.000)

<r>, <g> and <b> are in the range 0.0..1.0

Color

mirror_mode=<string>

Supported strings: no l r d dl dr u ul ur

Default: no

Mirror mode

Suboptions for fv_sparktv

mode=<string>

Supported strings: fg light dark

Default: all

Mode

Suboptions for fv_spiraltv

mode=<string>

Supported strings: Concentric A Sawtooth Up Sawtooth Down Triangle Sinusoidal Concentric B Lens Flat

Default: Concentric A

Mode

g_focus_interval=<number> (0..60, default: 6)

Focus interval

center_x=<number> (0.000..1.000, default: 0.500)

Center x

center_y=<number> (0.000..1.000, default: 0.500)

Center y

g_depth_shift=<number> (0..5, default: 0)

Depth shift

Suboptions for fv_tlp

factor=<number> (0.00..1.00, default: 0.50)

Strength

0 means no effect, 1 means maximum (= still image)

quality=<number> (1..5, default: 2)

Quality

Suboptions for fv_textlogo

text=<string> (Default: Enter text)

Text

Text to display

color=<r>,<g>,<b>,<a> (default: 1.000,1.000,1.000,1.000)

<r>, <g>, <b> and <a> are in the range 0.0..1.0

Text color

border_color=<r>,<g>,<b> (default: 0.000,0.000,0.000)

<r>, <g> and <b> are in the range 0.0..1.0

Border color

border_width=<number> (0.00..10.00, default: 2.00)

Border width

font=<string> (Default: Courier-20)

Font

justify_h=<string>

Supported strings: center left right

Default: right

Horizontal justify

justify_v=<string>

Supported strings: center top bottom

Default: top

Vertical justify

border_left=<number> (0..65535, default: 10)

Left border

Distance from the left text border to the image border

border_right=<number> (0..65535, default: 10)

Right border

Distance from the right text border to the image border

border_top=<number> (0..65535, default: 10)

Top border

Distance from the top text border to the image border

border_bottom=<number> (0..65535, default: 10)

Bottom border

Distance from the bottom text border to the image border

Suboptions for fv_transform

tm=<string>

Supported strings: rotate affine perspective lens_effect whirl

Default: rotate

Transformation mode

Choose Transformation method. Each method can be configured in it's section.

im=<string>

Supported strings: auto nearest bilinear quadratic cubic_bspline

Default: auto

Interpolation mode

Choose interpolation method. Auto means to choose based on the conversion quality. Nearest is fastest, Bicubic is slowest.

bg_color=<r>,<g>,<b>,<a> (default: 0.000,0.000,0.000,1.000)

<r>, <g>, <b> and <a> are in the range 0.0..1.0

Background color

rotate_angle=<number> (-360.00..360.00, default: 0.00)

Angle

affine_xx=<number> (-2.000..2.000, default: 1.000)

X -> X

affine_xy=<number> (-2.000..2.000, default: 0.000)

X -> Y

affine_yx=<number> (-2.000..2.000, default: 0.000)

Y -> X

affine_yy=<number> (-2.000..2.000, default: 1.000)

Y -> Y

affine_ox=<number> (-1.000..1.000, default: 0.000)

X Offset

Normalized X offset. 1 corresponds to image with.

affine_oy=<number> (-1.000..1.000, default: 0.000)

Y Offset

Normalized Y offset. 1 corresponds to image height.

perspective_tl=<x>,<y> (default: 0.000,0.000)

<r>, <g> and <b> are in the range 0.0..1.0

Top left

Top left corner in normalized image coordinates

perspective_tr=<x>,<y> (default: 1.000,0.000)

<r>, <g> and <b> are in the range 0.0..1.0

Top right

Top right corner in normalized image coordinates

perspective_bl=<x>,<y> (default: 0.000,1.000)

<r>, <g> and <b> are in the range 0.0..1.0

Bottom left

Bottom left corner in normalized image coordinates

perspective_br=<x>,<y> (default: 1.000,1.000)

<r>, <g> and <b> are in the range 0.0..1.0

Bottom right

Bottom right corner in normalized image coordinates

lens_effect_pos=<x>,<y> (default: 0.500,0.500)

<r>, <g> and <b> are in the range 0.0..1.0

Position

Center of the lens

lens_effect_diameter=<number> (0.00..1.00, default: 0.25)

Diameter

Diamater of the lens (1 is image size)

lens_effect_zoom=<number> (5.00..200.00, default: 20.00)

Zoom

Zoom factor

whirl_center=<x>,<y> (default: 0.500,0.500)

<r>, <g> and <b> are in the range 0.0..1.0

Center

whirl_radius=<number> (0.00..1.00, default: 0.50)

Radius

whirl_pinch=<number> (0.00..1.00, default: 0.50)

Pinch

whirl_angle=<number> (0.00..360.00, default: 30.00)

Angle

Suboptions for fv_transformtv

transform=<number> (0..5, default: 0)

Transformation

Suboptions for fv_tctweak

mode=<string>

Supported strings: off interpolate remove_redundant remove_all add add_first

Default: off

Mode

int_framerate=<number> (1..999, default: 25)

Integer framerate

Set the integer framerate used when adding new timecodes

drop=[1|0] (default: 0)

Drop frame

Set the if drop frame is used when adding new timecodes

hours=<number> (0..23, default: 0)

Start hour

Set the start hours used when adding new timecodes

minutes=<number> (0..59, default: 0)

Start minute

Set the start minutes used when adding new timecodes

seconds=<number> (0..59, default: 0)

Start second

Set the start seconds used when adding new timecodes

frames=<number> (0..999, default: 0)

Start frames

Set the start frames used when adding new timecodes

Suboptions for fv_vertigotv

phase_increment=<number> (0.01..1.00, default: 0.02)

Phase increment

zoomrate=<number> (1.01..1.10, default: 1.01)

Zoom rate

Suboptions for fv_colormatrix_yuv

y_to_y=<number> (-2.000..2.000, default: 1.000)

Luminance -> Luminance

u_to_y=<number> (-2.000..2.000, default: 0.000)

Cb -> Luminance

v_to_y=<number> (-2.000..2.000, default: 0.000)

Cr -> Luminance

a_to_y=<number> (-2.000..2.000, default: 0.000)

Alpha -> Luminance

off_y=<number> (-2.000..2.000, default: 0.000)

Luminance offset

y_to_u=<number> (-2.000..2.000, default: 0.000)

Luminance -> Cb

u_to_u=<number> (-2.000..2.000, default: 1.000)

Cb -> Cb

v_to_u=<number> (-2.000..2.000, default: 0.000)

Cr -> Cb

a_to_u=<number> (-2.000..2.000, default: 0.000)

Alpha -> Cb

off_u=<number> (-2.000..2.000, default: 0.000)

Cb offset

y_to_v=<number> (-2.000..2.000, default: 0.000)

Luminance -> Cr

u_to_v=<number> (-2.000..2.000, default: 0.000)

Cb -> Cr

v_to_v=<number> (-2.000..2.000, default: 1.000)

Cr -> Cr

a_to_v=<number> (-2.000..2.000, default: 0.000)

Alpha -> Cr

off_v=<number> (-2.000..2.000, default: 0.000)

Cr offset

y_to_a=<number> (-2.000..2.000, default: 0.000)

Luminance -> Alpha

u_to_a=<number> (-2.000..2.000, default: 0.000)

Cb -> Alpha

v_to_a=<number> (-2.000..2.000, default: 0.000)

Cr -> Alpha

a_to_a=<number> (-2.000..2.000, default: 1.000)

Alpha -> Alpha

off_a=<number> (-2.000..2.000, default: 0.000)

Alpha offset

force_alpha=[1|0] (default: 0)

Force alpha

Create video with alpha channel even if the input format has no alpha channel. Use this to generate the alpha channel from other channels using the colormatrix.

Suboptions for fv_zoom

zoom_h=<number> (0.50..2.00, default: 1.00)

Zoom horizontally

zoom_v=<number> (0.50..2.00, default: 1.00)

Zoom vertically

sm=<string>

Supported strings: auto nearest bilinear quadratic cubic_bspline cubic_mitchell cubic_catmull sinc_lanczos

Default: auto

Scale mode

Choose scaling method. Auto means to choose based on the conversion quality. Nearest is fastest, Sinc with Lanczos window is slowest.

so=<number> (4..1000, default: 4)

Scale order

Order for sinc scaling

downscale_filter=<string>

Supported strings: auto none wide gauss

Default: auto

Antialiasing for downscaling

Specifies the antialiasing filter to be used when downscaling images.

downscale_blur=<number> (0.00..2.00, default: 1.00)

Blur factor for downscaling

Specifies how much blurring should be applied when downscaling. Smaller values can speed up scaling, but might result in strong aliasing.

quality=<number> (1..5, default: 2)

Quality

bg_color=<r>,<g>,<b>,<a> (default: 0.000,0.000,0.000,1.000)

<r>, <g>, <b> and <a> are in the range 0.0..1.0

Background color

-vm <video monitor options>

Set video monitor options
do_monitor=[1|0] (default: 1)

Enable monitor

plugin=option[{suboptions}]

Supported options: ov_x11 ov_v4l2

Default: ov_x11

Plugin

Suboptions for plugin=ov_x11

auto_resize=[1|0] (default: 1)

Auto resize window

disable_xscreensaver_normal=[1|0] (default: 0)

Disable Screensaver for normal playback

disable_xscreensaver_fullscreen=[1|0] (default: 1)

Disable Screensaver for fullscreen playback

force_hw_scale=[1|0] (default: 1)

Force hardware scaling

Use hardware scaling even if it involves more CPU intensive pixelformat conversions

background_color=<r>,<g>,<b> (default: 0.000,0.000,0.000)

<r>, <g> and <b> are in the range 0.0..1.0

Background color

Specify the background color for videos with alpha channel. This is only used by the OpenGL driver.

scale_mode=<string>

Supported strings: auto nearest bilinear quadratic cubic_bspline cubic_mitchell cubic_catmull sinc_lanczos

Default: auto

Scale mode

Choose scaling method. Auto means to choose based on the conversion quality. Nearest is fastest, Sinc with Lanczos window is slowest.

scale_order=<number> (4..1000, default: 4)

Scale order

Order for sinc scaling

scale_quality=<number> (1..5, default: 2)

Scale quality

Scale quality

Suboptions for plugin=ov_v4l2

device=option[{suboptions}]

Supported options: <None>

Default: (null)

V4L2 Device

force_rw=[1|0] (default: 1)

Force write

Don't use memory mapping

-enc <encoding_options>

Set encoding options
ae=option[{suboptions}]

Supported options: $to_video e_wav e_faac b_lame e_vorbis e_lame e_flac e_ffmpeg_audio e_opus e_speex

Default: e_wav

Audio

Suboptions for ae=e_wav

format=<string>

Supported strings: wav raw

Default: waw

Format

write_info_chunk=[1|0] (default: 1)

Write info chunk

bits=<string>

Supported strings: 8 16 24 32

Default: 16

Bits per sample

be=[1|0] (default: 0)

Output big endian (Raw only)

Suboptions for ae=e_faac

do_id3v1=[1|0] (default: 1)

Write ID3V1.1 tag

do_id3v2=[1|0] (default: 1)

Write ID3V2 tag

id3v2_charset=<string>

Supported strings: 0 1 2 3

Default: 3

ID3V2 Encoding

object_type=<string>

Supported strings: mpeg4_lc mpeg2_lc mpeg4_main mpeg4_lc mpeg4_ltp

Default: mpeg4_main

Object type

bitrate=<number> (0..1000, default: 0)

Bitrate (kbps)

Average bitrate (0: VBR based on quality)

quality=<number> (10..500, default: 100)

Quality

Quantizer quality

block_types=<string>

Supported strings: Both No short No long

Default: Both

Block types

tns=[1|0] (default: 0)

Use temporal noise shaping

no_midside=[1|0] (default: 0)

Don't use mid/side coding

Suboptions for ae=b_lame

server=<string> (Default: localhost)

Server

port=<number> (1..65535, default: 8000)

Port

mount=<string> (Default: /stream.ogg)

Mount

user=<string> (Default: source)

User

password=<string>

Password

name=<string> (Default: Test stream)

Name

description=<string> (Default: Brought to you by gmerlin)

Description

genre=<string>

Genre

stereo_mode=<string>

Supported strings: Stereo Joint stereo Auto

Default: Auto

Stereo mode

Stereo: Completely independent channels Joint stereo: Improve quality (save bits) by using similarities of the channels Auto (recommended): Select one of the above depending on quality or bitrate setting

quality=<number> (0..9, default: 2)

Encoding speed

0: Slowest encoding, best quality 9: Fastest encoding, worst quality

cbr_bitrate=<number> (8..320, default: 128)

Bitrate (kbps)

Bitrate in kbps. If your selection is no valid mp3 bitrate, we'll choose the closest value.

Suboptions for ae=e_vorbis

bitrate_mode=<string>

Supported strings: vbr vbr_bitrate managed

Default: VBR

Bitrate mode

Bitrate mode: VBR: You specify a quality and (optionally) a minimum and maximum bitrate VBR (bitrate): The specified nominal bitrate will be used for selecting the encoder mode. Managed: You specify a nominal bitrate and (optionally) a minimum and maximum bitrate VBR is recommended, managed bitrate might result in a worse quality

nominal_bitrate=<number> (0..1000, default: 128)

Nominal bitrate (kbps)

Nominal bitrate (in kbps) for managed mode

quality=<number> (0.0..10.0, default: 3.0)

VBR Quality (10: best)

Quality for VBR mode 10: best (largest output file) 0: worst (smallest output file)

min_bitrate=<number> (0..1000, default: 0)

Minimum bitrate (kbps)

Optional minimum bitrate (in kbps) 0 = unspecified

max_bitrate=<number> (0..1000, default: 0)

Maximum bitrate (kbps)

Optional maximum bitrate (in kbps) 0 = unspecified

Suboptions for ae=e_lame

do_id3v1=[1|0] (default: 1)

Write ID3V1.1 tag

do_id3v2=[1|0] (default: 1)

Write ID3V2 tag

id3v2_charset=<string>

Supported strings: 0 3

Default: 3

ID3V2 Encoding

add_cover=[1|0] (default: 1)

Add cover to ID3V2 tag if available

bitrate_mode=<string>

Supported strings: CBR ABR VBR

Default: CBR

Bitrate mode

stereo_mode=<string>

Supported strings: Stereo Joint stereo Auto

Default: Auto

Stereo mode

Stereo: Completely independent channels Joint stereo: Improve quality (save bits) by using similarities of the channels Auto (recommended): Select one of the above depending on quality or bitrate setting

quality=<number> (0..9, default: 2)

Encoding speed

0: Slowest encoding, best quality 9: Fastest encoding, worst quality

cbr_bitrate=<number> (8..320, default: 128)

Bitrate (kbps)

Bitrate in kbps. If your selection is no valid mp3 bitrate, we'll choose the closest value.

Suboptions for ae=e_flac

use_vorbis_comment=[1|0] (default: 1)

Write vorbis comment

Write Vorbis comment containing metadata to the file

add_cover=[1|0] (default: 1)

Add cover

Write the album cover to the flac file if available

use_seektable=[1|0] (default: 1)

Write seek table

Write seektable (strongly recommended)

num_seektable_entries=<number> (1..1000000, default: 100)

Entries in the seektable

Maximum number of entries in the seek table. Default is 100, larger numbers result in shorter seeking times but also in larger files.

bits=<string>

Supported strings: 8 12 16 20 24

Default: 16

Bits

compression_level=<number> (0..8, default: 8)

Compression Level

0: Fastest encoding, biggest files 8: Slowest encoding, smallest files

Suboptions for ae=e_ffmpeg_audio

format=<string>

Supported strings: au ac3 aiff mp2 asf adts

Default: au

Format

codec=option[{suboptions}]

Supported options: pcm_mulaw pcm_s16be pcm_alaw ac3 pcm_s8 mp2 wma2 wma1 libfaac

Default: pcm_mulaw

Codec

Suboptions for codec=ac3

ff_bit_rate_str=<string>

Supported strings: 32 40 48 56 64 80 96 112 128 160 192 224 256 320 384 448 512 576 640

Default: 128

Bit rate (kbps)

Suboptions for codec=mp2

ff_bit_rate_str=<string>

Supported strings: 32 48 56 64 80 96 112 128 160 192 224 256 320 384

Default: 128

Bit rate (kbps)

Suboptions for codec=wma2

ff_bit_rate_str=<string>

Supported strings: 24 48 64 96 128

Default: 128

Bit rate (kbps)

Suboptions for codec=wma1

ff_bit_rate_str=<string>

Supported strings: 24 48 64 96 128

Default: 128

Bit rate (kbps)

Suboptions for codec=libfaac

faac_profile=<string>

Supported strings: main lc ssr ltp

Default: lc

Profile

ff_bit_rate_audio=<number> (default: 0)

Bit rate (kbps)

faac_quality=<number> (10..500, default: 100)

Quality

Quantizer quality

Suboptions for ae=e_opus

application=<string>

Supported strings: audio voip

Default: audio

Application

bitrate_mode=<string>

Supported strings: vbr cvbr cbr

Default: vbr

Bitrate mode

Bitrate mode

bitrate=<number> (0..512000, default: 0)

Bitrate

Bitrate (in bps). 0 means auto.

complexity=<number> (1..10, default: 10)

Encoding complexity

frame_size=<string>

Supported strings: 25 50 100 200 400 600

Default: 200

Frame size (ms)

Smaller framesizes achieve lower latency but less quality at a given bitrate. Sizes greater than 20ms are only interesting at fairly low bitrates.

dtx=[1|0] (default: 0)

Enable discontinuous transmission

inband_fec=[1|0] (default: 0)

Enable inband forward error correction

bandwidth=<string>

Supported strings: auto narrow medium wide superwide full

Default: auto

Bandwidth

loss_perc=<number> (0..100, default: 0)

Loss percentage

Suboptions for ae=e_speex

mode=<string>

Supported strings: auto nb wb uwb

Default: auto

Speex mode

Encoding mode. If you select Auto, the mode will be taken from the samplerate.

quality=<number> (0..10, default: 3)

Quality (10: best)

complexity=<number> (0..10, default: 3)

Encoding complexity

nframes=<number> (1..10, default: 1)

Frames per Ogg packet

bitrate=<number> (0..128, default: 8)

Bitrate (kbps)

Bitrate (in kbps). Set to 0 for seleting the standard bitrates for the encoding mode.

vbr=[1|0] (default: 0)

Variable bitrate

abr_bitrate=<number> (0..128, default: 0)

Average bitrate (kbps)

Average bitrate (in kbps). Set to 0 for disabling ABR.

vad=[1|0] (default: 0)

Use voice activity detection

dtx=[1|0] (default: 0)

Enable file-based discontinuous transmission

ve=option[{suboptions}]

Supported options: e_singlepic e_ffmpeg_video e_oggvideo b_ogg e_ffmpeg

Default: e_singlepic

Video

Suboptions for ve=e_singlepic

plugin=option[{suboptions}]

Supported options: iw_pnm iw_bmp iw_gavl iw_png iw_tga iw_tiff iw_jpeg

Default: iw_pnm

Plugin

Suboptions for plugin=iw_pnm

format=<string>

Supported strings: binary ascii

Default: binary

Format

comment=<string> (Default: Created with gmerlin)

Comment

Comment which will be written in front of every file

Suboptions for plugin=iw_png

compression=<number> (0..9, default: 9)

Compression level

bit_mode=<string>

Supported strings: Auto 8 16

Default: 8

Bits per channel

If you select auto, the depth will be chosen according to the input format

Suboptions for plugin=iw_tga

rle=[1|0] (default: 0)

Do RLE compression

Suboptions for plugin=iw_tiff

compression=<string>

Supported strings: none packbits deflate jpeg

Default: none

Compression

jpeg_quality=<number> (0..100, default: 75)

JPEG quality

zip_level=<number> (0..9, default: 9)

Deflate compression level

Suboptions for plugin=iw_jpeg

quality=<number> (0..100, default: 95)

Quality

chroma_sampling=<string>

Supported strings: 4:2:0 4:2:2 4:4:4

Default: 4:2:0

Chroma sampling

frame_digits=<number> (1..9, default: 4)

Framenumber digits

frame_offset=<number> (0..1000000, default: 0)

Framenumber offset

Suboptions for ve=e_ffmpeg_video

format=<string>

Supported strings: mpeg1video mpeg2video

Default: mpeg1video

Format

codec=option[{suboptions}]

Supported options: mpeg1video mpeg2video

Default: mpeg1video

Codec

Suboptions for codec=mpeg1video

gop_size=<number> (0..300, default: 250)

GOP size (0 = intra only)

ff_scenechange_threshold=<number> (-1000000000..1000000000, default: 0)

Scenechange threshold

Threshold for scene change detection. Negative values mean more sensitivity (more keyframes)

ff_flag_closed_gop=[1|0] (default: 0)

Close all GOPs

ff_flag2_strict_gop=[1|0] (default: 0)

Strictly enforce GOP size

ff_max_b_frames=<number> (default: 0)

Max B-Frames

Maximum number of B-frames between non B-frames

ff_b_frame_strategy=[1|0] (default: 0)

Avoid B-frames in high motion scenes

ff_bit_rate_video=<number> (default: 800)

Bit rate (kbps)

ff_bit_rate_tolerance=<number> (default: 8000)

Bitrate tolerance (kbps)

Number of bits the bitstream is allowed to diverge from the reference. Unused for constant quantizer encoding

ff_rc_min_rate=<number> (default: 0)

Minimum bitrate (kbps)

Minimum bitrate (0 means arbitrary)

ff_rc_max_rate=<number> (default: 0)

Maximum bitrate (kbps)

Maximum bitrate (0 means arbitrary)

ff_rc_buffer_size=<number> (default: 0)

RC buffer size

Decoder bitstream buffer size in kbits. When encoding with max and/or min bitrate, this must be specified.

ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)

Initial RC complexity

ff_rc_initial_buffer_occupancy=<number> (default: 0)

Initial RC buffer occupancy

Number of kilobits which should be loaded into the rc buffer before encoding starts. Must not be larger than RC buffer size

ff_qmin=<number> (0..31, default: 2)

Minimum quantizer scale

ff_qmax=<number> (0..31, default: 31)

Maximum quantizer scale

ff_max_qdiff=<number> (0..31, default: 3)

Maximum quantizer difference

Maximum quantizer difference between frames

ff_flag_qscale=[1|0] (default: 0)

Use fixed quantizer

Use fixed quality encoding

ff_qscale=<number> (1..31, default: 10)

Fixed quantizer

Quantizer for fixed quality encoding. Lower means better, 1 is not recommended

ff_qcompress=<number> (0.00..1.00, default: 0.50)

Quantizer compression

Amount of qscale change between easy & hard scenes

ff_qblur=<number> (0.00..1.00, default: 0.00)

Quantizer blur

Amount of qscale smoothing over time

ff_trellis=[1|0] (default: 0)

Use trellis quantization

Use trellis quantization (improves quality)

ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)

I quantizer factor

Quantizer factor between P-frames and I-frames. If > 0 then the last P frame quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset)

ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)

I quantizer offset

Quantizer offset between P-frames and I-frames

ff_b_quant_factor=<number> (-31.00..31.00, default: 1.25)

B quantizer factor

Quantizer factor between B-frames and non-B-frames

ff_b_quant_offset=<number> (0.00..31.00, default: 1.25)

B quantizer offset

Quantizer offset between B-frames and non-B-frames if > 0 then the last p frame quantizer will be used (q= lastp_q*factor+offset) if < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset)

ff_me_method=<string>

Supported strings: Zero Phods Log X1 Epzs Full

Default: Zero

Motion estimation method

ff_me_cmp=<string>

Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE

Default: SAD

ME compare function

Motion estimation compare function.SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences

ff_me_cmp_chroma=[1|0] (default: 0)

Enable chroma ME compare

ff_me_range=<number> (0..1000, default: 0)

Motion estimation range

Motion estimation search range (0 means unlimited)

ff_me_threshold=<number> (0..4000000, default: 0)

ME Theshold

Motion estimation threshold. under which no motion estimation is performed, but instead the user specified motion vectors are used

ff_mb_decision=<string>

Supported strings: Use compare function Fewest bits Rate distoration

Default: Use compare function

MB decision mode

ff_dia_size=<number> (-9..9, default: 0)

ME diamond size & shape

Motion estimation diamond size. Negative means shape adaptive.

ff_pre_me=<number> (0..2, default: 0)

ME pre-pass

Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always

ff_me_pre_cmp=<string>

Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE

Default: SAD

ME pre-pass compare function

Motion estimation pre-pass compare function. SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences

ff_me_pre_cmp_chroma=[1|0] (default: 0)

Enable chroma ME pre-pass compare

ff_pre_dia_size=<number> (-9..9, default: 0)

ME pre-pass diamond size & shape

Motion estimation pre-pass diamond size. Negative means shape adaptive.

ff_lumi_masking=<number> (0.00..1.00, default: 0.00)

Luminance masking

Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is a sane range.

ff_dark_masking=<number> (0.00..1.00, default: 0.00)

Darkness masking

Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a sane range.

ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)

Temporary complexity masking

Encode very fast moving image parts with reduced quality. 0 means disabled.

ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)

Spatial complexity masking

Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is a sane range.

ff_border_masking=<number> (0.00..1.00, default: 0.00)

Border masking

Encode image parts near the border with reduced quality. 0 means disabled

ff_p_masking=<number> (0.00..1.00, default: 0.00)

Inter block masking

Encode inter blocks with reduced quality (increases the quality of intra blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.

ff_strict_std_compliance=<number> (-2..2, default: 0)

Standards compliance

2: Strictly conform to a older more strict version of the spec or reference software 1: Strictly conform to all the things in the spec no matter what consequences 0: Default -1: Allow unofficial extensions -2: Allow non standarized experimental things

ff_noise_reduction=<number> (0..2000, default: 0)

Noise reduction

ff_flag_gray=[1|0] (default: 0)

Grayscale mode

ff_flag_bitexact=[1|0] (default: 0)

Use only bitexact stuff

Use only bitexact stuff (except (i)dct)

Suboptions for codec=mpeg2video

gop_size=<number> (0..300, default: 250)

GOP size (0 = intra only)

ff_scenechange_threshold=<number> (-1000000000..1000000000, default: 0)

Scenechange threshold

Threshold for scene change detection. Negative values mean more sensitivity (more keyframes)

ff_flag_closed_gop=[1|0] (default: 0)

Close all GOPs

ff_flag2_strict_gop=[1|0] (default: 0)

Strictly enforce GOP size

ff_max_b_frames=<number> (default: 0)

Max B-Frames

Maximum number of B-frames between non B-frames

ff_b_frame_strategy=[1|0] (default: 0)

Avoid B-frames in high motion scenes

ff_bit_rate_video=<number> (default: 800)

Bit rate (kbps)

ff_bit_rate_tolerance=<number> (default: 8000)

Bitrate tolerance (kbps)

Number of bits the bitstream is allowed to diverge from the reference. Unused for constant quantizer encoding

ff_rc_min_rate=<number> (default: 0)

Minimum bitrate (kbps)

Minimum bitrate (0 means arbitrary)

ff_rc_max_rate=<number> (default: 0)

Maximum bitrate (kbps)

Maximum bitrate (0 means arbitrary)

ff_rc_buffer_size=<number> (default: 0)

RC buffer size

Decoder bitstream buffer size in kbits. When encoding with max and/or min bitrate, this must be specified.

ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)

Initial RC complexity

ff_rc_initial_buffer_occupancy=<number> (default: 0)

Initial RC buffer occupancy

Number of kilobits which should be loaded into the rc buffer before encoding starts. Must not be larger than RC buffer size

ff_qmin=<number> (0..31, default: 2)

Minimum quantizer scale

ff_qmax=<number> (0..31, default: 31)

Maximum quantizer scale

ff_max_qdiff=<number> (0..31, default: 3)

Maximum quantizer difference

Maximum quantizer difference between frames

ff_flag_qscale=[1|0] (default: 0)

Use fixed quantizer

Use fixed quality encoding

ff_qscale=<number> (1..31, default: 10)

Fixed quantizer

Quantizer for fixed quality encoding. Lower means better, 1 is not recommended

ff_qcompress=<number> (0.00..1.00, default: 0.50)

Quantizer compression

Amount of qscale change between easy & hard scenes

ff_qblur=<number> (0.00..1.00, default: 0.00)

Quantizer blur

Amount of qscale smoothing over time

ff_trellis=[1|0] (default: 0)

Use trellis quantization

Use trellis quantization (improves quality)

ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)

I quantizer factor

Quantizer factor between P-frames and I-frames. If > 0 then the last P frame quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset)

ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)

I quantizer offset

Quantizer offset between P-frames and I-frames

ff_b_quant_factor=<number> (-31.00..31.00, default: 1.25)

B quantizer factor

Quantizer factor between B-frames and non-B-frames

ff_b_quant_offset=<number> (0.00..31.00, default: 1.25)

B quantizer offset

Quantizer offset between B-frames and non-B-frames if > 0 then the last p frame quantizer will be used (q= lastp_q*factor+offset) if < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset)

ff_me_method=<string>

Supported strings: Zero Phods Log X1 Epzs Full

Default: Zero

Motion estimation method

ff_me_cmp=<string>

Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE

Default: SAD

ME compare function

Motion estimation compare function.SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences

ff_me_cmp_chroma=[1|0] (default: 0)

Enable chroma ME compare

ff_me_range=<number> (0..1000, default: 0)

Motion estimation range

Motion estimation search range (0 means unlimited)

ff_me_threshold=<number> (0..4000000, default: 0)

ME Theshold

Motion estimation threshold. under which no motion estimation is performed, but instead the user specified motion vectors are used

ff_mb_decision=<string>

Supported strings: Use compare function Fewest bits Rate distoration

Default: Use compare function

MB decision mode

ff_dia_size=<number> (-9..9, default: 0)

ME diamond size & shape

Motion estimation diamond size. Negative means shape adaptive.

ff_pre_me=<number> (0..2, default: 0)

ME pre-pass

Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always

ff_me_pre_cmp=<string>

Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE

Default: SAD

ME pre-pass compare function

Motion estimation pre-pass compare function. SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences

ff_me_pre_cmp_chroma=[1|0] (default: 0)

Enable chroma ME pre-pass compare

ff_pre_dia_size=<number> (-9..9, default: 0)

ME pre-pass diamond size & shape

Motion estimation pre-pass diamond size. Negative means shape adaptive.

ff_lumi_masking=<number> (0.00..1.00, default: 0.00)

Luminance masking

Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is a sane range.

ff_dark_masking=<number> (0.00..1.00, default: 0.00)

Darkness masking

Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a sane range.

ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)

Temporary complexity masking

Encode very fast moving image parts with reduced quality. 0 means disabled.

ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)

Spatial complexity masking

Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is a sane range.

ff_border_masking=<number> (0.00..1.00, default: 0.00)

Border masking

Encode image parts near the border with reduced quality. 0 means disabled

ff_p_masking=<number> (0.00..1.00, default: 0.00)

Inter block masking

Encode inter blocks with reduced quality (increases the quality of intra blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.

ff_strict_std_compliance=<number> (-2..2, default: 0)

Standards compliance

2: Strictly conform to a older more strict version of the spec or reference software 1: Strictly conform to all the things in the spec no matter what consequences 0: Default -1: Allow unofficial extensions -2: Allow non standarized experimental things

ff_noise_reduction=<number> (0..2000, default: 0)

Noise reduction

ff_flag_gray=[1|0] (default: 0)

Grayscale mode

ff_flag_bitexact=[1|0] (default: 0)

Use only bitexact stuff

Use only bitexact stuff (except (i)dct)

default_timescale=<number> (default: 25)

Default timescale

For formats, which support only constant framerates, set the default timescale here

default_frame_duration=<number> (default: 1)

Default frame duration

For formats, which support only constant framerates, set the default frame duration here

Suboptions for ve=e_oggvideo

codec=option[{suboptions}]

Supported options: vorbis speex flacogg opus

Default: vorbis

Codec

Suboptions for codec=vorbis

bitrate_mode=<string>

Supported strings: vbr vbr_bitrate managed

Default: VBR

Bitrate mode

Bitrate mode: VBR: You specify a quality and (optionally) a minimum and maximum bitrate VBR (bitrate): The specified nominal bitrate will be used for selecting the encoder mode. Managed: You specify a nominal bitrate and (optionally) a minimum and maximum bitrate VBR is recommended, managed bitrate might result in a worse quality

nominal_bitrate=<number> (0..1000, default: 128)

Nominal bitrate (kbps)

Nominal bitrate (in kbps) for managed mode

quality=<number> (0.0..10.0, default: 3.0)

VBR Quality (10: best)

Quality for VBR mode 10: best (largest output file) 0: worst (smallest output file)

min_bitrate=<number> (0..1000, default: 0)

Minimum bitrate (kbps)

Optional minimum bitrate (in kbps) 0 = unspecified

max_bitrate=<number> (0..1000, default: 0)

Maximum bitrate (kbps)

Optional maximum bitrate (in kbps) 0 = unspecified

Suboptions for codec=speex

mode=<string>

Supported strings: auto nb wb uwb

Default: auto

Speex mode

Encoding mode. If you select Auto, the mode will be taken from the samplerate.

quality=<number> (0..10, default: 3)

Quality (10: best)

complexity=<number> (0..10, default: 3)

Encoding complexity

nframes=<number> (1..10, default: 1)

Frames per Ogg packet

bitrate=<number> (0..128, default: 8)

Bitrate (kbps)

Bitrate (in kbps). Set to 0 for seleting the standard bitrates for the encoding mode.

vbr=[1|0] (default: 0)

Variable bitrate

abr_bitrate=<number> (0..128, default: 0)

Average bitrate (kbps)

Average bitrate (in kbps). Set to 0 for disabling ABR.

vad=[1|0] (default: 0)

Use voice activity detection

dtx=[1|0] (default: 0)

Enable file-based discontinuous transmission

Suboptions for codec=flacogg

bits=<string>

Supported strings: 8 12 16 20 24

Default: 16

Bits

compression_level=<number> (0..8, default: 8)

Compression Level

0: Fastest encoding, biggest files 8: Slowest encoding, smallest files

Suboptions for codec=opus

application=<string>

Supported strings: audio voip

Default: audio

Application

bitrate_mode=<string>

Supported strings: vbr cvbr cbr

Default: vbr

Bitrate mode

Bitrate mode

bitrate=<number> (0..512000, default: 0)

Bitrate

Bitrate (in bps). 0 means auto.

complexity=<number> (1..10, default: 10)

Encoding complexity

frame_size=<string>

Supported strings: 25 50 100 200 400 600

Default: 200

Frame size (ms)

Smaller framesizes achieve lower latency but less quality at a given bitrate. Sizes greater than 20ms are only interesting at fairly low bitrates.

dtx=[1|0] (default: 0)

Enable discontinuous transmission

inband_fec=[1|0] (default: 0)

Enable inband forward error correction

bandwidth=<string>

Supported strings: auto narrow medium wide superwide full

Default: auto

Bandwidth

loss_perc=<number> (0..100, default: 0)

Loss percentage

codec=option[{suboptions}]

Supported options: theora schroedinger

Default: theora

Codec

Suboptions for codec=theora

cbr=[1|0] (default: 0)

Use constant bitrate

For constant bitrate, choose a target bitrate. For variable bitrate, choose a nominal quality.

target_bitrate=<number> (45..2000, default: 250)

Target bitrate (kbps)

quality=<number> (0..63, default: 10)

Nominal quality

Quality for VBR mode 63: best (largest output file) 0: worst (smallest output file)

max_keyframe_interval=<number> (1..1000, default: 64)

Maximum keyframe interval

drop_frames=[1|0] (default: 1)

Enable frame dropping

Drop frames to keep within bitrate buffer constraints. This can have a severe impact on quality, but is the only way to ensure that bitrate targets are met at low rates during sudden bursts of activity.

cap_overflow=[1|0] (default: 1)

Don't bank excess bits for later use

Ignore bitrate buffer overflows. If the encoder uses so few bits that the reservoir of available bits overflows, ignore the excess. The encoder will not try to use these extra bits in future frames. At high rates this may cause the result to be undersized, but allows a client to play the stream using a finite buffer; it should normally be enabled.

cap_underflow=[1|0] (default: 0)

Don't try to make up shortfalls later

Ignore bitrate buffer underflows. If the encoder uses so many bits that the reservoir of available bits underflows, ignore the deficit. The encoder will not try to make up these extra bits in future frames. At low rates this may cause the result to be oversized; it should normally be disabled.

speed=<number> (0.00..1.00, default: 0.00)

Encoding speed

Higher speed levels favor quicker encoding over better quality per bit. Depending on the encoding mode, and the internal algorithms used, quality may actually improve, but in this case bitrate will also likely increase. In any case, overall rate/distortion performance will probably decrease.

default_timescale=<number> (default: 25)

Default timescale

For formats, which support only constant framerates, set the default timescale here

default_frame_duration=<number> (default: 1)

Default frame duration

For formats, which support only constant framerates, set the default frame duration here

Suboptions for codec=schroedinger

schro_rate_control=<string>

Supported strings: constant_noise_threshold constant_bitrate low_delay lossless constant_lambda constant_error constant_quality

Default: constant_quality

Rate control

schro_bitrate=<number> (0..2147483647, default: 0)

Bitrate

schro_max_bitrate=<number> (0..2147483647, default: 13824000)

Max bitrate

schro_min_bitrate=<number> (0..2147483647, default: 13824000)

Min bitrate

schro_buffer_size=<number> (0..2147483647, default: 0)

Buffer size

schro_buffer_level=<number> (0..2147483647, default: 0)

Buffer level

schro_quality=<number> (0.00..10.00, default: 5.00)

Quality

schro_noise_threshold=<number> (0.00..100.00, default: 25.00)

Noise threshold

schro_enable_rdo_cbr=[1|0] (default: 1)

Enable rdo cbr

schro_noise_threshold=<number> (0.00..100.00, default: 25.00)

Noise threshold

schro_gop_structure=<string>

Supported strings: adaptive intra_only backref chained_backref biref chained_biref

Default: adaptive

Gop structure

schro_au_distance=<number> (1..2147483647, default: 120)

Au distance

schro_open_gop=[1|0] (default: 1)

Open gop

schro_mv_precision=<number> (0..3, default: 0)

Mv precision

schro_motion_block_size=<string>

Supported strings: automatic small medium large

Default: automatic

Motion block size

schro_motion_block_overlap=<string>

Supported strings: automatic none partial full

Default: automatic

Motion block overlap

schro_enable_chroma_me=[1|0] (default: 0)

Enable chroma me

schro_enable_global_motion=[1|0] (default: 0)

Enable global motion

schro_enable_phasecorr_estimation=[1|0] (default: 0)

Enable phasecorr estimation

schro_enable_hierarchical_estimation=[1|0] (default: 1)

Enable hierarchical estimation

schro_enable_zero_estimation=[1|0] (default: 0)

Enable zero estimation

schro_enable_bigblock_estimation=[1|0] (default: 1)

Enable bigblock estimation

schro_enable_scene_change_detection=[1|0] (default: 1)

Enable scene change detection

schro_enable_deep_estimation=[1|0] (default: 1)

Enable deep estimation

schro_intra_wavelet=<string>

Supported strings: desl_dubuc_9_7 le_gall_5_3 desl_dubuc_13_7 haar_0 haar_1 fidelity daub_9_7

Default: desl_dubuc_9_7

Intra wavelet

schro_inter_wavelet=<string>

Supported strings: desl_dubuc_9_7 le_gall_5_3 desl_dubuc_13_7 haar_0 haar_1 fidelity daub_9_7

Default: desl_dubuc_9_7

Inter wavelet

schro_filtering=<string>

Supported strings: none center_weighted_median gaussian add_noise adaptive_gaussian

Default: none

Filtering

schro_filter_value=<number> (0.00..100.00, default: 5.00)

Filter value

schro_force_profile=<string>

Supported strings: auto vc2_low_delay vc2_simple vc2_main main

Default: auto

Force profile

schro_codeblock_size=<string>

Supported strings: automatic small medium large full

Default: automatic

Codeblock size

schro_enable_multiquant=[1|0] (default: 0)

Enable multiquant

schro_enable_dc_multiquant=[1|0] (default: 0)

Enable dc multiquant

schro_enable_noarith=[1|0] (default: 0)

Enable noarith

schro_downsample_levels=<number> (2..8, default: 5)

Downsample levels

schro_transform_depth=<number> (0..6, default: 3)

Transform depth

default_timescale=<number> (default: 25)

Default timescale

For formats, which support only constant framerates, set the default timescale here

default_frame_duration=<number> (default: 1)

Default frame duration

For formats, which support only constant framerates, set the default frame duration here

Suboptions for ve=b_ogg

server=<string> (Default: localhost)

Server

port=<number> (1..65535, default: 8000)

Port

mount=<string> (Default: /stream.ogg)

Mount

user=<string> (Default: source)

User

password=<string>

Password

name=<string> (Default: Test stream)

Name

description=<string> (Default: Brought to you by gmerlin)

Description

genre=<string>

Genre

codec=option[{suboptions}]

Supported options: vorbis opus speex

Default: vorbis

Codec

Suboptions for codec=vorbis

bitrate_mode=<string>

Supported strings: vbr vbr_bitrate managed

Default: VBR

Bitrate mode

Bitrate mode: VBR: You specify a quality and (optionally) a minimum and maximum bitrate VBR (bitrate): The specified nominal bitrate will be used for selecting the encoder mode. Managed: You specify a nominal bitrate and (optionally) a minimum and maximum bitrate VBR is recommended, managed bitrate might result in a worse quality

nominal_bitrate=<number> (0..1000, default: 128)

Nominal bitrate (kbps)

Nominal bitrate (in kbps) for managed mode

quality=<number> (0.0..10.0, default: 3.0)

VBR Quality (10: best)

Quality for VBR mode 10: best (largest output file) 0: worst (smallest output file)

min_bitrate=<number> (0..1000, default: 0)

Minimum bitrate (kbps)

Optional minimum bitrate (in kbps) 0 = unspecified

max_bitrate=<number> (0..1000, default: 0)

Maximum bitrate (kbps)

Optional maximum bitrate (in kbps) 0 = unspecified

Suboptions for codec=opus

application=<string>

Supported strings: audio voip

Default: audio

Application

bitrate_mode=<string>

Supported strings: vbr cvbr cbr

Default: vbr

Bitrate mode

Bitrate mode

bitrate=<number> (0..512000, default: 0)

Bitrate

Bitrate (in bps). 0 means auto.

complexity=<number> (1..10, default: 10)

Encoding complexity

frame_size=<string>

Supported strings: 25 50 100 200 400 600

Default: 200

Frame size (ms)

Smaller framesizes achieve lower latency but less quality at a given bitrate. Sizes greater than 20ms are only interesting at fairly low bitrates.

dtx=[1|0] (default: 0)

Enable discontinuous transmission

inband_fec=[1|0] (default: 0)

Enable inband forward error correction

bandwidth=<string>

Supported strings: auto narrow medium wide superwide full

Default: auto

Bandwidth

loss_perc=<number> (0..100, default: 0)

Loss percentage

Suboptions for codec=speex

mode=<string>

Supported strings: auto nb wb uwb

Default: auto

Speex mode

Encoding mode. If you select Auto, the mode will be taken from the samplerate.

quality=<number> (0..10, default: 3)

Quality (10: best)

complexity=<number> (0..10, default: 3)

Encoding complexity

nframes=<number> (1..10, default: 1)

Frames per Ogg packet

bitrate=<number> (0..128, default: 8)

Bitrate (kbps)

Bitrate (in kbps). Set to 0 for seleting the standard bitrates for the encoding mode.

vbr=[1|0] (default: 0)

Variable bitrate

abr_bitrate=<number> (0..128, default: 0)

Average bitrate (kbps)

Average bitrate (in kbps). Set to 0 for disabling ABR.

vad=[1|0] (default: 0)

Use voice activity detection

dtx=[1|0] (default: 0)

Enable file-based discontinuous transmission

cbr=[1|0] (default: 0)

Use constant bitrate

For constant bitrate, choose a target bitrate. For variable bitrate, choose a nominal quality.

target_bitrate=<number> (45..2000, default: 250)

Target bitrate (kbps)

quality=<number> (0..63, default: 10)

Nominal quality

Quality for VBR mode 63: best (largest output file) 0: worst (smallest output file)

max_keyframe_interval=<number> (1..1000, default: 64)

Maximum keyframe interval

drop_frames=[1|0] (default: 1)

Enable frame dropping

Drop frames to keep within bitrate buffer constraints. This can have a severe impact on quality, but is the only way to ensure that bitrate targets are met at low rates during sudden bursts of activity.

cap_overflow=[1|0] (default: 1)

Don't bank excess bits for later use

Ignore bitrate buffer overflows. If the encoder uses so few bits that the reservoir of available bits overflows, ignore the excess. The encoder will not try to use these extra bits in future frames. At high rates this may cause the result to be undersized, but allows a client to play the stream using a finite buffer; it should normally be enabled.

cap_underflow=[1|0] (default: 0)

Don't try to make up shortfalls later

Ignore bitrate buffer underflows. If the encoder uses so many bits that the reservoir of available bits underflows, ignore the deficit. The encoder will not try to make up these extra bits in future frames. At low rates this may cause the result to be oversized; it should normally be disabled.

speed=<number> (0.00..1.00, default: 0.00)

Encoding speed

Higher speed levels favor quicker encoding over better quality per bit. Depending on the encoding mode, and the internal algorithms used, quality may actually improve, but in this case bitrate will also likely increase. In any case, overall rate/distortion performance will probably decrease.

default_timescale=<number> (default: 25)

Default timescale

For formats, which support only constant framerates, set the default timescale here

default_frame_duration=<number> (default: 1)

Default frame duration

For formats, which support only constant framerates, set the default frame duration here

Suboptions for ve=e_ffmpeg

format=<string>

Supported strings: avi mpeg vob dvd flv asf mpegts matroska webm mp4

Default: avi

Format

codec=option[{suboptions}]

Supported options: pcm_s16le pcm_u8 pcm_alaw pcm_mulaw mp3 mp2 ac3 libfaac wma2 wma1 libvorbis dca

Default: pcm_s16le

Codec

Suboptions for codec=mp3

ff_bit_rate_str=<string>

Supported strings: 32 40 48 56 64 80 96 112 128 160 192 224 256 320

Default: 128

Bit rate (kbps)

Suboptions for codec=mp2

ff_bit_rate_str=<string>

Supported strings: 32 48 56 64 80 96 112 128 160 192 224 256 320 384

Default: 128

Bit rate (kbps)

Suboptions for codec=ac3

ff_bit_rate_str=<string>

Supported strings: 32 40 48 56 64 80 96 112 128 160 192 224 256 320 384 448 512 576 640

Default: 128

Bit rate (kbps)

Suboptions for codec=libfaac

faac_profile=<string>

Supported strings: main lc ssr ltp

Default: lc

Profile

ff_bit_rate_audio=<number> (default: 0)

Bit rate (kbps)

faac_quality=<number> (10..500, default: 100)

Quality

Quantizer quality

Suboptions for codec=wma2

ff_bit_rate_str=<string>

Supported strings: 24 48 64 96 128

Default: 128

Bit rate (kbps)

Suboptions for codec=wma1

ff_bit_rate_str=<string>

Supported strings: 24 48 64 96 128

Default: 128

Bit rate (kbps)

Suboptions for codec=libvorbis

ff_bit_rate_audio=<number> (default: 0)

Bit rate (kbps)

ff_rc_min_rate=<number> (default: 0)

Minimum bitrate (kbps)

Minimum bitrate (0 means arbitrary)

ff_rc_max_rate=<number> (default: 0)

Maximum bitrate (kbps)

Maximum bitrate (0 means arbitrary)

quality=<number> (-1..10, default: 3)

Quality

Quantizer quality

Suboptions for codec=dca

ff_bit_rate_str=<string>

Supported strings: 32 56 64 96 112 128 192 224 256 320 384 448 512 576 640 768 896 1024 1152 1280 1344 1408 1411200 1472 1536 1920 2048 3072 3840

Default: 1536

Bit rate (kbps)

codec=option[{suboptions}]

Supported options: mpeg4 msmpeg4v3 mjpeg mpeg1video mpeg2video flv1 libx264 wmv1 libvpx

Default: mpeg4

Codec

Suboptions for codec=mpeg4

gop_size=<number> (0..300, default: 250)

GOP size (0 = intra only)

ff_scenechange_threshold=<number> (-1000000000..1000000000, default: 0)

Scenechange threshold

Threshold for scene change detection. Negative values mean more sensitivity (more keyframes)

ff_flag_closed_gop=[1|0] (default: 0)

Close all GOPs

ff_flag2_strict_gop=[1|0] (default: 0)

Strictly enforce GOP size

ff_max_b_frames=<number> (default: 0)

Max B-Frames

Maximum number of B-frames between non B-frames

ff_b_frame_strategy=[1|0] (default: 0)

Avoid B-frames in high motion scenes

ff_flag_ac_pred=[1|0] (default: 0)

MPEG-4 AC prediction

ff_bit_rate_video=<number> (default: 800)

Bit rate (kbps)

ff_bit_rate_tolerance=<number> (default: 8000)

Bitrate tolerance (kbps)

Number of bits the bitstream is allowed to diverge from the reference. Unused for constant quantizer encoding

ff_rc_min_rate=<number> (default: 0)

Minimum bitrate (kbps)

Minimum bitrate (0 means arbitrary)

ff_rc_max_rate=<number> (default: 0)

Maximum bitrate (kbps)

Maximum bitrate (0 means arbitrary)

ff_rc_buffer_size=<number> (default: 0)

RC buffer size

Decoder bitstream buffer size in kbits. When encoding with max and/or min bitrate, this must be specified.

ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)

Initial RC complexity

ff_rc_initial_buffer_occupancy=<number> (default: 0)

Initial RC buffer occupancy

Number of kilobits which should be loaded into the rc buffer before encoding starts. Must not be larger than RC buffer size

ff_qmin=<number> (0..31, default: 2)

Minimum quantizer scale

ff_qmax=<number> (0..31, default: 31)

Maximum quantizer scale

ff_max_qdiff=<number> (0..31, default: 3)

Maximum quantizer difference

Maximum quantizer difference between frames

ff_flag_qscale=[1|0] (default: 0)

Use fixed quantizer

Use fixed quality encoding

ff_qscale=<number> (1..31, default: 10)

Fixed quantizer

Quantizer for fixed quality encoding. Lower means better, 1 is not recommended

ff_qcompress=<number> (0.00..1.00, default: 0.50)

Quantizer compression

Amount of qscale change between easy & hard scenes

ff_qblur=<number> (0.00..1.00, default: 0.00)

Quantizer blur

Amount of qscale smoothing over time

ff_trellis=[1|0] (default: 0)

Use trellis quantization

Use trellis quantization (improves quality)

ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)

I quantizer factor

Quantizer factor between P-frames and I-frames. If > 0 then the last P frame quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset)

ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)

I quantizer offset

Quantizer offset between P-frames and I-frames

ff_b_quant_factor=<number> (-31.00..31.00, default: 1.25)

B quantizer factor

Quantizer factor between B-frames and non-B-frames

ff_b_quant_offset=<number> (0.00..31.00, default: 1.25)

B quantizer offset

Quantizer offset between B-frames and non-B-frames if > 0 then the last p frame quantizer will be used (q= lastp_q*factor+offset) if < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset)

ff_flag_cbp_rd=[1|0] (default: 0)

CBP RD

Use rate distortion optimization for cbp

ff_me_method=<string>

Supported strings: Zero Phods Log X1 Epzs Full

Default: Zero

Motion estimation method

ff_me_cmp=<string>

Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE

Default: SAD

ME compare function

Motion estimation compare function.SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences

ff_me_cmp_chroma=[1|0] (default: 0)

Enable chroma ME compare

ff_me_range=<number> (0..1000, default: 0)

Motion estimation range

Motion estimation search range (0 means unlimited)

ff_me_threshold=<number> (0..4000000, default: 0)

ME Theshold

Motion estimation threshold. under which no motion estimation is performed, but instead the user specified motion vectors are used

ff_mb_decision=<string>

Supported strings: Use compare function Fewest bits Rate distoration

Default: Use compare function

MB decision mode

ff_dia_size=<number> (-9..9, default: 0)

ME diamond size & shape

Motion estimation diamond size. Negative means shape adaptive.

ff_flag_4mv=[1|0] (default: 0)

4 MV per MB allowed

Allow 4 motion vectors per macroblock (slightly better quality). Works better if MB decision mode is "Fewest bits" or "Rate distoration".

ff_flag_qp_rd=[1|0] (default: 0)

QP RD

Use rate distortion optimization for qp selection

ff_pre_me=<number> (0..2, default: 0)

ME pre-pass

Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always

ff_me_pre_cmp=<string>

Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE

Default: SAD

ME pre-pass compare function

Motion estimation pre-pass compare function. SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences

ff_me_pre_cmp_chroma=[1|0] (default: 0)

Enable chroma ME pre-pass compare

ff_pre_dia_size=<number> (-9..9, default: 0)

ME pre-pass diamond size & shape

Motion estimation pre-pass diamond size. Negative means shape adaptive.

ff_flag_qpel=[1|0] (default: 0)

Use qpel MC

Use 1/4 pixel motion compensation. Warning: QPEL is not supported by all decoders.

ff_me_sub_cmp=<string>

Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE

Default: SAD

Subpixel ME compare function

Subpixel motion estimation compare function. SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences

ff_me_sub_cmp_chroma=[1|0] (default: 0)

Enable chroma subpixel ME compare

ff_me_subpel_quality=<number> (1..8, default: 8)

Subpel ME quality

Subpel motion estimation refinement quality (for qpel). Higher values mean higher quality but slower encoding.

ff_lumi_masking=<number> (0.00..1.00, default: 0.00)

Luminance masking

Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is a sane range.

ff_dark_masking=<number> (0.00..1.00, default: 0.00)

Darkness masking

Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a sane range.

ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)

Temporary complexity masking

Encode very fast moving image parts with reduced quality. 0 means disabled.

ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)

Spatial complexity masking

Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is a sane range.

ff_border_masking=<number> (0.00..1.00, default: 0.00)

Border masking

Encode image parts near the border with reduced quality. 0 means disabled

ff_p_masking=<number> (0.00..1.00, default: 0.00)

Inter block masking

Encode inter blocks with reduced quality (increases the quality of intra blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.

ff_strict_std_compliance=<number> (-2..2, default: 0)

Standards compliance

2: Strictly conform to a older more strict version of the spec or reference software 1: Strictly conform to all the things in the spec no matter what consequences 0: Default -1: Allow unofficial extensions -2: Allow non standarized experimental things

ff_noise_reduction=<number> (0..2000, default: 0)

Noise reduction

ff_flag_gray=[1|0] (default: 0)

Grayscale mode

ff_flag_bitexact=[1|0] (default: 0)

Use only bitexact stuff

Use only bitexact stuff (except (i)dct)

Suboptions for codec=msmpeg4v3

gop_size=<number> (0..300, default: 250)

GOP size (0 = intra only)

ff_scenechange_threshold=<number> (-1000000000..1000000000, default: 0)

Scenechange threshold

Threshold for scene change detection. Negative values mean more sensitivity (more keyframes)

ff_flag_closed_gop=[1|0] (default: 0)

Close all GOPs

ff_flag2_strict_gop=[1|0] (default: 0)

Strictly enforce GOP size

ff_bit_rate_video=<number> (default: 800)

Bit rate (kbps)

ff_bit_rate_tolerance=<number> (default: 8000)

Bitrate tolerance (kbps)

Number of bits the bitstream is allowed to diverge from the reference. Unused for constant quantizer encoding

ff_rc_min_rate=<number> (default: 0)

Minimum bitrate (kbps)

Minimum bitrate (0 means arbitrary)

ff_rc_max_rate=<number> (default: 0)

Maximum bitrate (kbps)

Maximum bitrate (0 means arbitrary)

ff_rc_buffer_size=<number> (default: 0)

RC buffer size

Decoder bitstream buffer size in kbits. When encoding with max and/or min bitrate, this must be specified.

ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)

Initial RC complexity

ff_rc_initial_buffer_occupancy=<number> (default: 0)

Initial RC buffer occupancy

Number of kilobits which should be loaded into the rc buffer before encoding starts. Must not be larger than RC buffer size

ff_qmin=<number> (0..31, default: 2)

Minimum quantizer scale

ff_qmax=<number> (0..31, default: 31)

Maximum quantizer scale

ff_max_qdiff=<number> (0..31, default: 3)

Maximum quantizer difference

Maximum quantizer difference between frames

ff_flag_qscale=[1|0] (default: 0)

Use fixed quantizer

Use fixed quality encoding

ff_qscale=<number> (1..31, default: 10)

Fixed quantizer

Quantizer for fixed quality encoding. Lower means better, 1 is not recommended

ff_qcompress=<number> (0.00..1.00, default: 0.50)

Quantizer compression

Amount of qscale change between easy & hard scenes

ff_qblur=<number> (0.00..1.00, default: 0.00)

Quantizer blur

Amount of qscale smoothing over time

ff_trellis=[1|0] (default: 0)

Use trellis quantization

Use trellis quantization (improves quality)

ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)

I quantizer factor

Quantizer factor between P-frames and I-frames. If > 0 then the last P frame quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset)

ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)

I quantizer offset

Quantizer offset between P-frames and I-frames

ff_me_method=<string>

Supported strings: Zero Phods Log X1 Epzs Full

Default: Zero

Motion estimation method

ff_me_cmp=<string>

Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE

Default: SAD

ME compare function

Motion estimation compare function.SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences

ff_me_cmp_chroma=[1|0] (default: 0)

Enable chroma ME compare

ff_me_range=<number> (0..1000, default: 0)

Motion estimation range

Motion estimation search range (0 means unlimited)

ff_me_threshold=<number> (0..4000000, default: 0)

ME Theshold

Motion estimation threshold. under which no motion estimation is performed, but instead the user specified motion vectors are used

ff_mb_decision=<string>

Supported strings: Use compare function Fewest bits Rate distoration

Default: Use compare function

MB decision mode

ff_dia_size=<number> (-9..9, default: 0)

ME diamond size & shape

Motion estimation diamond size. Negative means shape adaptive.

ff_pre_me=<number> (0..2, default: 0)

ME pre-pass

Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always

ff_me_pre_cmp=<string>

Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE

Default: SAD

ME pre-pass compare function

Motion estimation pre-pass compare function. SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences

ff_me_pre_cmp_chroma=[1|0] (default: 0)

Enable chroma ME pre-pass compare

ff_pre_dia_size=<number> (-9..9, default: 0)

ME pre-pass diamond size & shape

Motion estimation pre-pass diamond size. Negative means shape adaptive.

ff_lumi_masking=<number> (0.00..1.00, default: 0.00)

Luminance masking

Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is a sane range.

ff_dark_masking=<number> (0.00..1.00, default: 0.00)

Darkness masking

Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a sane range.

ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)

Temporary complexity masking

Encode very fast moving image parts with reduced quality. 0 means disabled.

ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)

Spatial complexity masking

Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is a sane range.

ff_border_masking=<number> (0.00..1.00, default: 0.00)

Border masking

Encode image parts near the border with reduced quality. 0 means disabled

ff_p_masking=<number> (0.00..1.00, default: 0.00)

Inter block masking

Encode inter blocks with reduced quality (increases the quality of intra blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.

ff_strict_std_compliance=<number> (-2..2, default: 0)

Standards compliance

2: Strictly conform to a older more strict version of the spec or reference software 1: Strictly conform to all the things in the spec no matter what consequences 0: Default -1: Allow unofficial extensions -2: Allow non standarized experimental things

ff_noise_reduction=<number> (0..2000, default: 0)

Noise reduction

ff_flag_gray=[1|0] (default: 0)

Grayscale mode

ff_flag_bitexact=[1|0] (default: 0)

Use only bitexact stuff

Use only bitexact stuff (except (i)dct)

Suboptions for codec=mjpeg

ff_bit_rate_video=<number> (default: 800)

Bit rate (kbps)

ff_bit_rate_tolerance=<number> (default: 8000)

Bitrate tolerance (kbps)

Number of bits the bitstream is allowed to diverge from the reference. Unused for constant quantizer encoding

ff_rc_min_rate=<number> (default: 0)

Minimum bitrate (kbps)

Minimum bitrate (0 means arbitrary)

ff_rc_max_rate=<number> (default: 0)

Maximum bitrate (kbps)

Maximum bitrate (0 means arbitrary)

ff_rc_buffer_size=<number> (default: 0)

RC buffer size

Decoder bitstream buffer size in kbits. When encoding with max and/or min bitrate, this must be specified.

ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)

Initial RC complexity

ff_rc_initial_buffer_occupancy=<number> (default: 0)

Initial RC buffer occupancy

Number of kilobits which should be loaded into the rc buffer before encoding starts. Must not be larger than RC buffer size

ff_qmin=<number> (0..31, default: 2)

Minimum quantizer scale

ff_qmax=<number> (0..31, default: 31)

Maximum quantizer scale

ff_max_qdiff=<number> (0..31, default: 3)

Maximum quantizer difference

Maximum quantizer difference between frames

ff_flag_qscale=[1|0] (default: 0)

Use fixed quantizer

Use fixed quality encoding

ff_qscale=<number> (1..31, default: 10)

Fixed quantizer

Quantizer for fixed quality encoding. Lower means better, 1 is not recommended

ff_qcompress=<number> (0.00..1.00, default: 0.50)

Quantizer compression

Amount of qscale change between easy & hard scenes

ff_qblur=<number> (0.00..1.00, default: 0.00)

Quantizer blur

Amount of qscale smoothing over time

ff_trellis=[1|0] (default: 0)

Use trellis quantization

Use trellis quantization (improves quality)

ff_strict_std_compliance=<number> (-2..2, default: 0)

Standards compliance

2: Strictly conform to a older more strict version of the spec or reference software 1: Strictly conform to all the things in the spec no matter what consequences 0: Default -1: Allow unofficial extensions -2: Allow non standarized experimental things

ff_noise_reduction=<number> (0..2000, default: 0)

Noise reduction

ff_flag_gray=[1|0] (default: 0)

Grayscale mode

ff_flag_bitexact=[1|0] (default: 0)

Use only bitexact stuff

Use only bitexact stuff (except (i)dct)

Suboptions for codec=mpeg1video

gop_size=<number> (0..300, default: 250)

GOP size (0 = intra only)

ff_scenechange_threshold=<number> (-1000000000..1000000000, default: 0)

Scenechange threshold

Threshold for scene change detection. Negative values mean more sensitivity (more keyframes)

ff_flag_closed_gop=[1|0] (default: 0)

Close all GOPs

ff_flag2_strict_gop=[1|0] (default: 0)

Strictly enforce GOP size

ff_max_b_frames=<number> (default: 0)

Max B-Frames

Maximum number of B-frames between non B-frames

ff_b_frame_strategy=[1|0] (default: 0)

Avoid B-frames in high motion scenes

ff_bit_rate_video=<number> (default: 800)

Bit rate (kbps)

ff_bit_rate_tolerance=<number> (default: 8000)

Bitrate tolerance (kbps)

Number of bits the bitstream is allowed to diverge from the reference. Unused for constant quantizer encoding

ff_rc_min_rate=<number> (default: 0)

Minimum bitrate (kbps)

Minimum bitrate (0 means arbitrary)

ff_rc_max_rate=<number> (default: 0)

Maximum bitrate (kbps)

Maximum bitrate (0 means arbitrary)

ff_rc_buffer_size=<number> (default: 0)

RC buffer size

Decoder bitstream buffer size in kbits. When encoding with max and/or min bitrate, this must be specified.

ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)

Initial RC complexity

ff_rc_initial_buffer_occupancy=<number> (default: 0)

Initial RC buffer occupancy

Number of kilobits which should be loaded into the rc buffer before encoding starts. Must not be larger than RC buffer size

ff_qmin=<number> (0..31, default: 2)

Minimum quantizer scale

ff_qmax=<number> (0..31, default: 31)

Maximum quantizer scale

ff_max_qdiff=<number> (0..31, default: 3)

Maximum quantizer difference

Maximum quantizer difference between frames

ff_flag_qscale=[1|0] (default: 0)

Use fixed quantizer

Use fixed quality encoding

ff_qscale=<number> (1..31, default: 10)

Fixed quantizer

Quantizer for fixed quality encoding. Lower means better, 1 is not recommended

ff_qcompress=<number> (0.00..1.00, default: 0.50)

Quantizer compression

Amount of qscale change between easy & hard scenes

ff_qblur=<number> (0.00..1.00, default: 0.00)

Quantizer blur

Amount of qscale smoothing over time

ff_trellis=[1|0] (default: 0)

Use trellis quantization

Use trellis quantization (improves quality)

ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)

I quantizer factor

Quantizer factor between P-frames and I-frames. If > 0 then the last P frame quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset)

ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)

I quantizer offset

Quantizer offset between P-frames and I-frames

ff_b_quant_factor=<number> (-31.00..31.00, default: 1.25)

B quantizer factor

Quantizer factor between B-frames and non-B-frames

ff_b_quant_offset=<number> (0.00..31.00, default: 1.25)

B quantizer offset

Quantizer offset between B-frames and non-B-frames if > 0 then the last p frame quantizer will be used (q= lastp_q*factor+offset) if < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset)

ff_me_method=<string>

Supported strings: Zero Phods Log X1 Epzs Full

Default: Zero

Motion estimation method

ff_me_cmp=<string>

Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE

Default: SAD

ME compare function

Motion estimation compare function.SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences

ff_me_cmp_chroma=[1|0] (default: 0)

Enable chroma ME compare

ff_me_range=<number> (0..1000, default: 0)

Motion estimation range

Motion estimation search range (0 means unlimited)

ff_me_threshold=<number> (0..4000000, default: 0)

ME Theshold

Motion estimation threshold. under which no motion estimation is performed, but instead the user specified motion vectors are used

ff_mb_decision=<string>

Supported strings: Use compare function Fewest bits Rate distoration

Default: Use compare function

MB decision mode

ff_dia_size=<number> (-9..9, default: 0)

ME diamond size & shape

Motion estimation diamond size. Negative means shape adaptive.

ff_pre_me=<number> (0..2, default: 0)

ME pre-pass

Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always

ff_me_pre_cmp=<string>

Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE

Default: SAD

ME pre-pass compare function

Motion estimation pre-pass compare function. SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences

ff_me_pre_cmp_chroma=[1|0] (default: 0)

Enable chroma ME pre-pass compare

ff_pre_dia_size=<number> (-9..9, default: 0)

ME pre-pass diamond size & shape

Motion estimation pre-pass diamond size. Negative means shape adaptive.

ff_lumi_masking=<number> (0.00..1.00, default: 0.00)

Luminance masking

Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is a sane range.

ff_dark_masking=<number> (0.00..1.00, default: 0.00)

Darkness masking

Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a sane range.

ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)

Temporary complexity masking

Encode very fast moving image parts with reduced quality. 0 means disabled.

ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)

Spatial complexity masking

Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is a sane range.

ff_border_masking=<number> (0.00..1.00, default: 0.00)

Border masking

Encode image parts near the border with reduced quality. 0 means disabled

ff_p_masking=<number> (0.00..1.00, default: 0.00)

Inter block masking

Encode inter blocks with reduced quality (increases the quality of intra blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.

ff_strict_std_compliance=<number> (-2..2, default: 0)

Standards compliance

2: Strictly conform to a older more strict version of the spec or reference software 1: Strictly conform to all the things in the spec no matter what consequences 0: Default -1: Allow unofficial extensions -2: Allow non standarized experimental things

ff_noise_reduction=<number> (0..2000, default: 0)

Noise reduction

ff_flag_gray=[1|0] (default: 0)

Grayscale mode

ff_flag_bitexact=[1|0] (default: 0)

Use only bitexact stuff

Use only bitexact stuff (except (i)dct)

Suboptions for codec=mpeg2video

gop_size=<number> (0..300, default: 250)

GOP size (0 = intra only)

ff_scenechange_threshold=<number> (-1000000000..1000000000, default: 0)

Scenechange threshold

Threshold for scene change detection. Negative values mean more sensitivity (more keyframes)

ff_flag_closed_gop=[1|0] (default: 0)

Close all GOPs

ff_flag2_strict_gop=[1|0] (default: 0)

Strictly enforce GOP size

ff_max_b_frames=<number> (default: 0)

Max B-Frames

Maximum number of B-frames between non B-frames

ff_b_frame_strategy=[1|0] (default: 0)

Avoid B-frames in high motion scenes

ff_bit_rate_video=<number> (default: 800)

Bit rate (kbps)

ff_bit_rate_tolerance=<number> (default: 8000)

Bitrate tolerance (kbps)

Number of bits the bitstream is allowed to diverge from the reference. Unused for constant quantizer encoding

ff_rc_min_rate=<number> (default: 0)

Minimum bitrate (kbps)

Minimum bitrate (0 means arbitrary)

ff_rc_max_rate=<number> (default: 0)

Maximum bitrate (kbps)

Maximum bitrate (0 means arbitrary)

ff_rc_buffer_size=<number> (default: 0)

RC buffer size

Decoder bitstream buffer size in kbits. When encoding with max and/or min bitrate, this must be specified.

ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)

Initial RC complexity

ff_rc_initial_buffer_occupancy=<number> (default: 0)

Initial RC buffer occupancy

Number of kilobits which should be loaded into the rc buffer before encoding starts. Must not be larger than RC buffer size

ff_qmin=<number> (0..31, default: 2)

Minimum quantizer scale

ff_qmax=<number> (0..31, default: 31)

Maximum quantizer scale

ff_max_qdiff=<number> (0..31, default: 3)

Maximum quantizer difference

Maximum quantizer difference between frames

ff_flag_qscale=[1|0] (default: 0)

Use fixed quantizer

Use fixed quality encoding

ff_qscale=<number> (1..31, default: 10)

Fixed quantizer

Quantizer for fixed quality encoding. Lower means better, 1 is not recommended

ff_qcompress=<number> (0.00..1.00, default: 0.50)

Quantizer compression

Amount of qscale change between easy & hard scenes

ff_qblur=<number> (0.00..1.00, default: 0.00)

Quantizer blur

Amount of qscale smoothing over time

ff_trellis=[1|0] (default: 0)

Use trellis quantization

Use trellis quantization (improves quality)

ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)

I quantizer factor

Quantizer factor between P-frames and I-frames. If > 0 then the last P frame quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset)

ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)

I quantizer offset

Quantizer offset between P-frames and I-frames

ff_b_quant_factor=<number> (-31.00..31.00, default: 1.25)

B quantizer factor

Quantizer factor between B-frames and non-B-frames

ff_b_quant_offset=<number> (0.00..31.00, default: 1.25)

B quantizer offset

Quantizer offset between B-frames and non-B-frames if > 0 then the last p frame quantizer will be used (q= lastp_q*factor+offset) if < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset)

ff_me_method=<string>

Supported strings: Zero Phods Log X1 Epzs Full

Default: Zero

Motion estimation method

ff_me_cmp=<string>

Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE

Default: SAD

ME compare function

Motion estimation compare function.SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences

ff_me_cmp_chroma=[1|0] (default: 0)

Enable chroma ME compare

ff_me_range=<number> (0..1000, default: 0)

Motion estimation range

Motion estimation search range (0 means unlimited)

ff_me_threshold=<number> (0..4000000, default: 0)

ME Theshold

Motion estimation threshold. under which no motion estimation is performed, but instead the user specified motion vectors are used

ff_mb_decision=<string>

Supported strings: Use compare function Fewest bits Rate distoration

Default: Use compare function

MB decision mode

ff_dia_size=<number> (-9..9, default: 0)

ME diamond size & shape

Motion estimation diamond size. Negative means shape adaptive.

ff_pre_me=<number> (0..2, default: 0)

ME pre-pass

Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always

ff_me_pre_cmp=<string>

Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE

Default: SAD

ME pre-pass compare function

Motion estimation pre-pass compare function. SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences

ff_me_pre_cmp_chroma=[1|0] (default: 0)

Enable chroma ME pre-pass compare

ff_pre_dia_size=<number> (-9..9, default: 0)

ME pre-pass diamond size & shape

Motion estimation pre-pass diamond size. Negative means shape adaptive.

ff_lumi_masking=<number> (0.00..1.00, default: 0.00)

Luminance masking

Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is a sane range.

ff_dark_masking=<number> (0.00..1.00, default: 0.00)

Darkness masking

Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a sane range.

ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)

Temporary complexity masking

Encode very fast moving image parts with reduced quality. 0 means disabled.

ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)

Spatial complexity masking

Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is a sane range.

ff_border_masking=<number> (0.00..1.00, default: 0.00)

Border masking

Encode image parts near the border with reduced quality. 0 means disabled

ff_p_masking=<number> (0.00..1.00, default: 0.00)

Inter block masking

Encode inter blocks with reduced quality (increases the quality of intra blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.

ff_strict_std_compliance=<number> (-2..2, default: 0)

Standards compliance

2: Strictly conform to a older more strict version of the spec or reference software 1: Strictly conform to all the things in the spec no matter what consequences 0: Default -1: Allow unofficial extensions -2: Allow non standarized experimental things

ff_noise_reduction=<number> (0..2000, default: 0)

Noise reduction

ff_flag_gray=[1|0] (default: 0)

Grayscale mode

ff_flag_bitexact=[1|0] (default: 0)

Use only bitexact stuff

Use only bitexact stuff (except (i)dct)

Suboptions for codec=flv1

gop_size=<number> (0..300, default: 250)

GOP size (0 = intra only)

ff_scenechange_threshold=<number> (-1000000000..1000000000, default: 0)

Scenechange threshold

Threshold for scene change detection. Negative values mean more sensitivity (more keyframes)

ff_flag_closed_gop=[1|0] (default: 0)

Close all GOPs

ff_flag2_strict_gop=[1|0] (default: 0)

Strictly enforce GOP size

ff_bit_rate_video=<number> (default: 800)

Bit rate (kbps)

ff_bit_rate_tolerance=<number> (default: 8000)

Bitrate tolerance (kbps)

Number of bits the bitstream is allowed to diverge from the reference. Unused for constant quantizer encoding

ff_rc_min_rate=<number> (default: 0)

Minimum bitrate (kbps)

Minimum bitrate (0 means arbitrary)

ff_rc_max_rate=<number> (default: 0)

Maximum bitrate (kbps)

Maximum bitrate (0 means arbitrary)

ff_rc_buffer_size=<number> (default: 0)

RC buffer size

Decoder bitstream buffer size in kbits. When encoding with max and/or min bitrate, this must be specified.

ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)

Initial RC complexity

ff_rc_initial_buffer_occupancy=<number> (default: 0)

Initial RC buffer occupancy

Number of kilobits which should be loaded into the rc buffer before encoding starts. Must not be larger than RC buffer size

ff_qmin=<number> (0..31, default: 2)

Minimum quantizer scale

ff_qmax=<number> (0..31, default: 31)

Maximum quantizer scale

ff_max_qdiff=<number> (0..31, default: 3)

Maximum quantizer difference

Maximum quantizer difference between frames

ff_flag_qscale=[1|0] (default: 0)

Use fixed quantizer

Use fixed quality encoding

ff_qscale=<number> (1..31, default: 10)

Fixed quantizer

Quantizer for fixed quality encoding. Lower means better, 1 is not recommended

ff_qcompress=<number> (0.00..1.00, default: 0.50)

Quantizer compression

Amount of qscale change between easy & hard scenes

ff_qblur=<number> (0.00..1.00, default: 0.00)

Quantizer blur

Amount of qscale smoothing over time

ff_trellis=[1|0] (default: 0)

Use trellis quantization

Use trellis quantization (improves quality)

ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)

I quantizer factor

Quantizer factor between P-frames and I-frames. If > 0 then the last P frame quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset)

ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)

I quantizer offset

Quantizer offset between P-frames and I-frames

ff_me_method=<string>

Supported strings: Zero Phods Log X1 Epzs Full

Default: Zero

Motion estimation method

ff_me_cmp=<string>

Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE

Default: SAD

ME compare function

Motion estimation compare function.SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences

ff_me_cmp_chroma=[1|0] (default: 0)

Enable chroma ME compare

ff_me_range=<number> (0..1000, default: 0)

Motion estimation range

Motion estimation search range (0 means unlimited)

ff_me_threshold=<number> (0..4000000, default: 0)

ME Theshold

Motion estimation threshold. under which no motion estimation is performed, but instead the user specified motion vectors are used

ff_mb_decision=<string>

Supported strings: Use compare function Fewest bits Rate distoration

Default: Use compare function

MB decision mode

ff_dia_size=<number> (-9..9, default: 0)

ME diamond size & shape

Motion estimation diamond size. Negative means shape adaptive.

ff_pre_me=<number> (0..2, default: 0)

ME pre-pass

Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always

ff_me_pre_cmp=<string>

Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE

Default: SAD

ME pre-pass compare function

Motion estimation pre-pass compare function. SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences

ff_me_pre_cmp_chroma=[1|0] (default: 0)

Enable chroma ME pre-pass compare

ff_pre_dia_size=<number> (-9..9, default: 0)

ME pre-pass diamond size & shape

Motion estimation pre-pass diamond size. Negative means shape adaptive.

ff_lumi_masking=<number> (0.00..1.00, default: 0.00)

Luminance masking

Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is a sane range.

ff_dark_masking=<number> (0.00..1.00, default: 0.00)

Darkness masking

Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a sane range.

ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)

Temporary complexity masking

Encode very fast moving image parts with reduced quality. 0 means disabled.

ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)

Spatial complexity masking

Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is a sane range.

ff_border_masking=<number> (0.00..1.00, default: 0.00)

Border masking

Encode image parts near the border with reduced quality. 0 means disabled

ff_p_masking=<number> (0.00..1.00, default: 0.00)

Inter block masking

Encode inter blocks with reduced quality (increases the quality of intra blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.

ff_strict_std_compliance=<number> (-2..2, default: 0)

Standards compliance

2: Strictly conform to a older more strict version of the spec or reference software 1: Strictly conform to all the things in the spec no matter what consequences 0: Default -1: Allow unofficial extensions -2: Allow non standarized experimental things

ff_noise_reduction=<number> (0..2000, default: 0)

Noise reduction

ff_flag_gray=[1|0] (default: 0)

Grayscale mode

ff_flag_bitexact=[1|0] (default: 0)

Use only bitexact stuff

Use only bitexact stuff (except (i)dct)

Suboptions for codec=libx264

libx264_preset=<string>

Supported strings: ultrafast superfast veryfast faster fast medium slow slower veryslow placebo

Default: medium

Preset

libx264_tune=<string>

Supported strings: $none film animation grain stillimage psnr ssim fastdecode zerolatency

Default: $none

Tune

ff_bit_rate_video=<number> (0..10000, default: 0)

Bit rate (kbps)

If > 0 encode with average bitrate

libx264_crf=<number> (-1.00..51.00, default: 23.00)

Quality-based VBR

Negative means disable

libx264_qp=<number> (-1..69, default: -1)

Force constant QP

Negative means disable, 0 means lossless

Suboptions for codec=wmv1

gop_size=<number> (0..300, default: 250)

GOP size (0 = intra only)

ff_scenechange_threshold=<number> (-1000000000..1000000000, default: 0)

Scenechange threshold

Threshold for scene change detection. Negative values mean more sensitivity (more keyframes)

ff_flag_closed_gop=[1|0] (default: 0)

Close all GOPs

ff_flag2_strict_gop=[1|0] (default: 0)

Strictly enforce GOP size

ff_bit_rate_video=<number> (default: 800)

Bit rate (kbps)

ff_bit_rate_tolerance=<number> (default: 8000)

Bitrate tolerance (kbps)

Number of bits the bitstream is allowed to diverge from the reference. Unused for constant quantizer encoding

ff_rc_min_rate=<number> (default: 0)

Minimum bitrate (kbps)

Minimum bitrate (0 means arbitrary)

ff_rc_max_rate=<number> (default: 0)

Maximum bitrate (kbps)

Maximum bitrate (0 means arbitrary)

ff_rc_buffer_size=<number> (default: 0)

RC buffer size

Decoder bitstream buffer size in kbits. When encoding with max and/or min bitrate, this must be specified.

ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)

Initial RC complexity

ff_rc_initial_buffer_occupancy=<number> (default: 0)

Initial RC buffer occupancy

Number of kilobits which should be loaded into the rc buffer before encoding starts. Must not be larger than RC buffer size

ff_qmin=<number> (0..31, default: 2)

Minimum quantizer scale

ff_qmax=<number> (0..31, default: 31)

Maximum quantizer scale

ff_max_qdiff=<number> (0..31, default: 3)

Maximum quantizer difference

Maximum quantizer difference between frames

ff_flag_qscale=[1|0] (default: 0)

Use fixed quantizer

Use fixed quality encoding

ff_qscale=<number> (1..31, default: 10)

Fixed quantizer

Quantizer for fixed quality encoding. Lower means better, 1 is not recommended

ff_qcompress=<number> (0.00..1.00, default: 0.50)

Quantizer compression

Amount of qscale change between easy & hard scenes

ff_qblur=<number> (0.00..1.00, default: 0.00)

Quantizer blur

Amount of qscale smoothing over time

ff_trellis=[1|0] (default: 0)

Use trellis quantization

Use trellis quantization (improves quality)

ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)

I quantizer factor

Quantizer factor between P-frames and I-frames. If > 0 then the last P frame quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset)

ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)

I quantizer offset

Quantizer offset between P-frames and I-frames

ff_me_method=<string>

Supported strings: Zero Phods Log X1 Epzs Full

Default: Zero

Motion estimation method

ff_me_cmp=<string>

Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE

Default: SAD

ME compare function

Motion estimation compare function.SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences

ff_me_cmp_chroma=[1|0] (default: 0)

Enable chroma ME compare

ff_me_range=<number> (0..1000, default: 0)

Motion estimation range

Motion estimation search range (0 means unlimited)

ff_me_threshold=<number> (0..4000000, default: 0)

ME Theshold

Motion estimation threshold. under which no motion estimation is performed, but instead the user specified motion vectors are used

ff_mb_decision=<string>

Supported strings: Use compare function Fewest bits Rate distoration

Default: Use compare function

MB decision mode

ff_dia_size=<number> (-9..9, default: 0)

ME diamond size & shape

Motion estimation diamond size. Negative means shape adaptive.

ff_pre_me=<number> (0..2, default: 0)

ME pre-pass

Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always

ff_me_pre_cmp=<string>

Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE

Default: SAD

ME pre-pass compare function

Motion estimation pre-pass compare function. SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences

ff_me_pre_cmp_chroma=[1|0] (default: 0)

Enable chroma ME pre-pass compare

ff_pre_dia_size=<number> (-9..9, default: 0)

ME pre-pass diamond size & shape

Motion estimation pre-pass diamond size. Negative means shape adaptive.

ff_lumi_masking=<number> (0.00..1.00, default: 0.00)

Luminance masking

Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is a sane range.

ff_dark_masking=<number> (0.00..1.00, default: 0.00)

Darkness masking

Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a sane range.

ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)

Temporary complexity masking

Encode very fast moving image parts with reduced quality. 0 means disabled.

ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)

Spatial complexity masking

Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is a sane range.

ff_border_masking=<number> (0.00..1.00, default: 0.00)

Border masking

Encode image parts near the border with reduced quality. 0 means disabled

ff_p_masking=<number> (0.00..1.00, default: 0.00)

Inter block masking

Encode inter blocks with reduced quality (increases the quality of intra blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.

ff_strict_std_compliance=<number> (-2..2, default: 0)

Standards compliance

2: Strictly conform to a older more strict version of the spec or reference software 1: Strictly conform to all the things in the spec no matter what consequences 0: Default -1: Allow unofficial extensions -2: Allow non standarized experimental things

ff_noise_reduction=<number> (0..2000, default: 0)

Noise reduction

ff_flag_gray=[1|0] (default: 0)

Grayscale mode

ff_flag_bitexact=[1|0] (default: 0)

Use only bitexact stuff

Use only bitexact stuff (except (i)dct)

Suboptions for codec=libvpx

ff_bit_rate_video=<number> (default: 800)

Bit rate (kbps)

ff_rc_min_rate=<number> (default: 0)

Minimum bitrate (kbps)

Minimum bitrate (0 means arbitrary)

ff_rc_max_rate=<number> (default: 0)

Maximum bitrate (kbps)

Maximum bitrate (0 means arbitrary)

ff_rc_buffer_size=<number> (default: 0)

RC buffer size

Decoder bitstream buffer size in kbits. When encoding with max and/or min bitrate, this must be specified.

ff_rc_initial_buffer_occupancy=<number> (default: 0)

Initial RC buffer occupancy

Number of kilobits which should be loaded into the rc buffer before encoding starts. Must not be larger than RC buffer size

ff_qcompress=<number> (0.00..1.00, default: 0.50)

2-Pass VBR/CBR

0: CBR, 1: VBR

ff_qmin=<number> (0..63, default: 2)

Minimum quantizer scale

recommended value 0-4

ff_qmax=<number> (0..63, default: 55)

Maximum quantizer scale

Must be larger than minimum, recommended value 50-63

libvpx_crf=<number> (0..63, default: 10)

Constant quality

Set this to 0 for enabling VBR

libvpx_deadline=<string>

Supported strings: best good realtime

Default: good

Speed

libvpx_cpu-used=<number> (0..1000, default: 0)

CPU usage modifier

ff_thread_count=<number> (default: 0)

Thread count

Number of threads to use

ff_gop_size=<number> (-1..1000, default: -1)

Maximum GOP size

Maximum keyframe distance, -1 means automatic

libvpx_auto-alt-ref=[1|0] (default: 0)

Enable alternate reference frames

Enable use of alternate reference frames (2-pass only)

libvpx_lag-in-frames=<number> (0..100, default: 0)

Lookahead

Number of frames to look ahead for alternate reference frame selection

libvpx_arnr-maxframes=<number> (0..100, default: 0)

Frame count for noise reduction

libvpx_arnr-type=<string>

Supported strings: $none backward forward centered

Default: backward

Noise reduction filter

default_timescale=<number> (default: 25)

Default timescale

For formats, which support only constant framerates, set the default timescale here

default_frame_duration=<number> (default: 1)

Default frame duration

For formats, which support only constant framerates, set the default frame duration here

-o <output_options>

Set output options
output_directory=<string> (Default: .)

Output directory

output_filename_mask=<string> (Default: %Y-%m-%d-%H-%M-%S)

Output filename mask

Extension is appended by the plugin For the date and time formatting, consult the documentation of the strftime(3) function

snapshot_directory=<string> (Default: .)

Snapshot directory

snapshot_filename_mask=<string> (Default: shot_%5n)

Snapshot filename mask

Extension is appended by the plugin %t Inserts time %d Inserts date %<i>n Inserts Frame number with <i> digits

-r

Record to file

-syslog <name>

Set log messages to syslog

The following generic options are available for all gmerlin applications

-help

Print this help message and exit

-help-man

Print this help message as a manual page and exit

-help-texi

Print this help message in texinfo format and exit

-version

Print version info and exit

-v level

Set verbosity level (0..4)

-syslog name

Log to syslog the specified name

-stderr

Always log to stderr

~/.gmerlin/plugins.xml

Cache of the plugin registry (shared by all applications)

~/.gmerlin/generic/cfg.xml

Default plugin parameters are read from there. Use gmerlin_plugincfg to change them.

September 2021 Gmerlin