IBDIAGNET(1) | IB DIAGNOSTIC PACKAGE | IBDIAGNET(1) |
ibdiagnet - IB diagnostic net
ibdiagnet [-c <count>] [-v] [-r] [-vlr] [-u] [-o
<out-dir>]
[-t <topo-file>] [-s <sys-name>] [-i <dev-index>] [-p
<port-num>] [-wt]
[-pm] [-pc] [-P <<PM>=<Value>>]
[-lw <1x|4x|12x>] [-ls <2.5|5|10>]
[-skip <ibdiag_check/s>] [-load_db <db_file>]
ibdiagnet scans the fabric using directed route packets and extracts all the available information regarding its connectivity and devices. It then produces the following files in the output directory (which defined by the -o option (see below)).
In addition to generating the files above, the discovery phase also checks for duplicate node/port GUIDs in the IB fabric. If such an error is detected, it is displayed on the standard output. After the discovery phase is completed, directed route packets are sent multiple times (according to the -c option) to detect possible problematic paths on which packets may be lost. Such paths are explored, and a report of the suspected bad links is displayed on the standard output.
After scanning the fabric, if the -r option is provided, a full report of the fabric qualities is displayed. This report includes:
Note: In case the IB fabric includes only one CA, then CA-to-CA paths are not reported. Furthermore, if a topology file is provided, ibdiagnet uses the names defined in it for the output reports.
2020-11-11 | IBDIAG 1.0 |