ipmctl-set-preferences - Modifies one or more user preferences
ipmctl set [OPTIONS] -preferences [PROPERTIES]
Modifies one or more user preferences in the PMem module
software.
-h, -help
Displays help for the command.
-ddrt
Used to specify DDRT as the desired transport protocol
for the current invocation of ipmctl.
-smbus
Used to specify SMBUS as the desired transport protocol
for the current invocation of ipmctl.
Note
The -ddrt and -smbus options are mutually exclusive and may not be
used together.
-o (text|nvmxml), -output (text|nvmxml)
Changes the output format. One of: "text"
(default) or "nvmxml".
CLI_DEFAULT_DIMM_ID
The default display of PMem module identifiers. One of:
•"UID": Use the DimmUID attribute as
defined in the section [Show Dimm].
•"HANDLE": Use the DimmHandle attribute
as defined in section [Show Dimm]. This is the default
CLI_DEFAULT_SIZE
The default display of capacities in the CLI. One of:
•"AUTO": Automatically choose the best
format for each capacity in binary multiples of bytes (i.e., B, MiB, GiB or
TiB). This is the default.
•"AUTO_10": Automatically choose the
best format for each capacity in decimal multiples of bytes (i.e., B, MB, GB
or TB).
•"B": Displays all capacities in
bytes.
•"MB": Displays all capacities in
megabytes.
•"MiB": Displays all capacities in
mebibytes.
•"GB": Displays all capacities in
gigabytes.
•"GiB": Displays all capacities in
gibibytes.
•"TB": Displays all capacities in
terabytes.
•"TiB": Displays all capacities in
tebibytes.
APPDIRECT_SETTINGS
The interleave settings to use when creating App Direct
capacity in the format: (IMCSize_ChannelSize). Must be one of the BIOS
supported App Direct settings returned by the command [Show System
Capabilities].
Note
ByOne is not a valid setting for this preference. The default is
"RECOMMENDED" which uses the BIOS recommended App Direct
settings.
Note
The same interleave settings are used for all the App Direct
capacity in
the system. Therefore, if any App Direct capacity already exists, this
preference cannot be changed.
DBG_LOG_LEVEL
Whether debug logging is enabled in the PMem module host
software. These logs pertain to the operation of the command-line tool only
and do not reflect any logging functionality of the PMem module. One of:
•"0": Logging is disabled. This is the
default.
•"1": Log Errors.
•"2": Log Warnings, Errors.
•"3": Log Informational, Warnings,
Errors.
•"4": Log Verbose, Informational,
Warnings, Errors.
Use DimmUID as the default PMem module identifier and display all
capacities in bytes.
ipmctl set -preferences CLI_DEFAULT_DIMM_ID=UID CLI_DEFAULT_SIZE=B
Returns the status of the operation.
Set (Property)=(Value): Success|Error (Code)-(Description)