NAME

ir-keytable - a swiss-knife tool to handle Remote Controllers.

SYNOPSIS

ir-keytable [OPTION]...

DESCRIPTION

ir-keytable is a tool that lists Remote Controller devices, loads rc keymaps, tests events, and adjusts other Remote Controller options.

Rather than loading a rc keymap, it is also possible to set protocol decoders and set rc scancode to keycode mappings directly.

Note: You need to have read permissions on /dev/input for most of the options to work.

OPTIONS

-a, --auto-load=CFGFILE: Auto-load keymaps, based on a configuration file. Only works with --sysdev.
-c, --clear: Clears the scancode to keycode mappings.
-D, --delay=DELAY: Sets the delay before repeating a keystroke.
-k, --set-key=SCANKEY: Set scancode to keycode mapping.
-p, --protocol=PROTOCOL: Comma separated list of kernel protocols or BPF protocol to enable. All other protocols are disabled.
-e, --parameter=PARAMETER: Comma separated list of parameters for the BPF protocol.
-P, --period=PERIOD: Sets the period to repeat a keystroke.
-r, --read: Read and show the current scancode to keycode mapping.
-s, --sysdev=SYSDEV: rc device to control, defaults to rc0 if not specified.
-t, --test: test if the rc device is generating events
-v, --verbose: Enables debug messages.
-w, --write=KEYMAP: Reads the protocols and scancode to keycode mapping from the KEYMAP file, and enables those on the rc device.
-?, --help: Prints the help message
--usage: Give a short usage message
-V, --version: print the v4l2-utils version

Mandatory or optional arguments to long options are also mandatory or optional for any corresponding short options. Options can be combined together.

The options arguments are:

SYSDEV: the rc device as found at /sys/class/rc
KEYMAP: a toml keymap file with a list of protocols and scancodes to keycode mappings. The format is described in rc_keymap(5).
SCANKEY: a set of scancode1=keycode1,scancode2=keycode2.. value pairs
PROTOCOL: Comma separated list of kernel protocols to be enabled (case insensitive). Supported kernel protocols are: nec, rc-5, rc-6, jvc, sony, sanyo, rc-5-sz, sharp, mce-kbd, xmp, imon, rc-mm, other, all. It can also be a BPF protocol, e.g. manchester, pulse_distance, pulse_length. If it does not match any of these, it is taken to be the path of BPF decoder to be loaded.
PARAMETERS: Comma separated list of parameters for the BPF protocol being loaded. They have the format of name=value, where value is an number.
DELAY: Delay before repeating a keystroke
PERIOD: Period to repeat a keystroke
CFGFILE: configuration file that associates a driver/keymap name with a keymap file

EXIT STATUS

On success, it returns 0. Otherwise, it will return the error code.

EXAMPLES

To list all connected Remote Controller devices:
ir-keytable

To clean the keycode mapping and use a newer one:
ir-keytable -c -w /etc/rc_keymaps/nec_terratec_cinergy_xs.toml

To append more codes to the existing table:
ir-keytable -w /etc/rc_keymaps/nec_terratec_cinergy_xs.toml

To read the current scancode to keycode mapping on the second remote controller:
ir-keytable -s rc1 -r

To enable NEC protocol and load a BPF protocol, with a parameter for the BPF protocol:
ir-keytable -p nec,pulse_distance -e pulse_header=9000

If you do not know what protocol a remote uses, it can be helpful to first try with all kernel decoders enabled. The decoded protocol and scancodes will be displayed in the output:
ir-keytable -c -p all -t

BUGS

Report bugs to Linux Media Mailing List <linux-media@vger.kernel.org>

COPYRIGHT

License GPLv2: GNU GPL version 2 <http://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.