Actions

"App::Daemon" recognizes three different actions:

my-app start

will start up the daemon. "start" itself is optional, as this is the default action,

        $ ./my-app
        $
    

will also run the 'start' action. By default, it will create a pid file and a log file in the current directory (named "my-app.pid" and "my-app.log". To change these locations, see the "-l" and "-p" options.

If the -X option is given, the program is running in foreground mode for testing purposes:

        $ ./my-app -X
        ...
    

stop

will find the daemon's PID in the pidfile and send it a SIGTERM signal. It will verify $App::Daemon::kill_retries times if the process is still alive, with 1-second sleeps in between.

To have App::Daemon send a different signal than SIGTERM (e.g., SIGINT), set

    use POSIX;
    $App::Daemon::kill_sig = SIGINT;
    

Note that his requires the numerial value (SIGINT via POSIX.pm), not a string like "SIGINT".

status

will print out diagnostics on what the status of the daemon is. Typically, the output looks like this:

    Pid file:    ./tt.pid
    Pid in file: 15562
    Running:     yes
    Name match:  1
        /usr/local/bin/perl -w test.pl
    

This indicates that the pidfile says that the daemon has PID 15562 and that a process with this PID is actually running at this moment. Also, a name grep on the process name in the process table results in 1 match, according to the output above.

Note that the name match is unreliable, as it just looks for a command line that looks approximately like the script itself. So if the script is "test.pl", it will match lines like "perl -w test.pl" or "perl test.pl start", but unfortunately also lines like "vi test.pl".

If the process is no longer running, the status output might look like this instead:

    Pid file:    ./tt.pid
    Pid in file: 14914
    Running:     no
    Name match:  0
    

The status commands exit code complies with

    http://refspecs.freestandards.org/LSB_3.1.1/LSB-Core-generic/LSB-Core-generic/iniscrptact.html
    

and returns

    0: if the process is up and running
    1: the process is dead but the pid file still exists
    3: the process is not running
    

These constants are defined within App::Daemon to help writing test scripts:

    use constant LSB_OK               => 0;
    use constant LSB_DEAD_PID_EXISTS  => 1;
    use constant LSB_DEAD_LOCK_EXISTS => 2;
    use constant LSB_NOT_RUNNING      => 3;
    use constant LSB_UNKNOWN          => 4;
    use constant ALREADY_RUNNING      => 150;
    

Command Line Options

-X

Foreground mode. Log messages go to the screen.

-l logfile

Logfile to send Log4perl messages to in background mode. Defaults to "./[appname].log". Note that having a logfile in the current directory doesn't make sense except for testing environments, make sure to set this to somewhere within "/var/log" for production use.

-u as_user

User to run as if started as root. Defaults to 'nobody'.

-g as_group

Group to run as if started as root. Defaults to 'nogroup'.

-l4p l4p.conf

Path to Log4perl configuration file. Note that in this case the -v option will be ignored.

-p pidfile

Where to save the pid of the started process. Defaults to "./[appname].pid". Note that having a pidfile in the current directory doesn't make sense except for testing environments, make sure to set this to somewhere within "/var/run" for production use.

-v

Increase default Log4perl verbosity from $INFO to $DEBUG. Note that this option will be ignored if Log4perl is initialized independently or if a user-provided Log4perl configuration file is used.

Setting Parameters

Instead of setting paramteters like the logfile, the pidfile etc. from the command line, you can directly manipulate App::Daemon's global variables:

    use App::Daemon qw(daemonize);
    $App::Daemon::logfile    = "mylog.log";
    $App::Daemon::pidfile    = "mypid.log";
    $App::Daemon::l4p_conf   = "myconf.l4p";
    $App::Daemon::background = 1;
    $App::Daemon::as_user    = "nobody";
    $App::Daemon::as_group   = "nogroup";
    use Log::Log4perl qw(:levels);
    $App::Daemon::loglevel   = $DEBUG;
    daemonize();

Application-specific command line options

If an application needs additional command line options, it can use whatever is not yet taken by App::Daemon, as described previously in the "Command Line Options" section.

However, it needs to make sure to remove these additional options before calling daemonize(), or App::Daemon will complain. To do this, create an options hash %opts and store application-specific options in there while removing them from @ARGV:

    my %opts = ();
    for my $opt (qw(-k -P -U)) {
        my $v = App::Daemon::find_option( $opt, 1 );
        $opts{ $opt } = $v if defined $v;
    }

After this, options "-k", "-P", and "-U" will have disappeared from @ARGV and can be checked in $opts{k}, $opts{P}, and $opts{U}.

Gotchas

Log File Permissions

If the process is started as root but later drops permissions to a non-priviledged user for security purposes, it's important that logfiles are created with correct permissions.

If they're created as root when the program starts, the non-priviledged user won't be able to write to them later (unless they're world-writable which is also undesirable because of security concerns).

The best strategy to handle this case is to specify the non-priviledged user as the owner of the logfile in the Log4perl configuration:

    log4perl.logger = DEBUG, FileApp
    log4perl.appender.FileApp = Log::Log4perl::Appender::File
    log4perl.appender.FileApp.filename = /var/log/foo-app.log
    log4perl.appender.FileApp.owner    = nobody
    log4perl.appender.FileApp.layout   = PatternLayout
    log4perl.appender.FileApp.layout.ConversionPattern = %d %m%n
    

This way, the process starts up as root, creates the logfile if it doesn't exist yet, and changes its owner to 'nobody'. Later, when the process assumes the identity of the user 'nobody', it will continue to write to the logfile without permission problems.

Log4perl Categories

Note that App::Daemon is logging messages in Log4perl's App::Daemon namespace. So, if you're running your own Log4perl configuration and define a root logger like

    log4perl.logger=DEBUG, appendername
    

then App::Daemon's messages will bubble up to it and be visible in the output. If you don't want that, either use

    log4perl.logger.My.App=DEBUG, appendername
    

to explicitly enable verbose logging in your application namespace (and not in App::Daemon's) or tone down App::Daemon's verbosity via

    log4perl.logger.App.Daemon=ERROR
    

explicitly. If you want more details on basic Log4perl features, check out the Log::Log4perl manual page.

Detach only

If you want to create a daemon without the fancy command line parsing and PID file checking functions, use

    use App::Daemon qw(detach);
    detach();
    # ... some code here

This will fork a child, terminate the parent and detach the child from the terminal. Issued from the command line, the program above will continue to run the code following the detach() call but return to the shell prompt immediately.