| Devel::GDB(3pm) | User Contributed Perl Documentation | Devel::GDB(3pm) |
Devel::GDB - Open and communicate a gdb session
use Devel::GDB;
$gdb = new Devel::GDB();
print $gdb->send_cmd('-environment-path');
print $gdb->get('info functions');
The old "get" syntax (of "Devel::GDB-1.23") has been deprecated and will not be supported in future versions. See the documentation of the "get" function for an explanation of why.
If you really want to use the old syntax, set $Devel::GDB::DEPRECATED to true:
use Devel::GDB ;
$Devel::GDB::DEPRECATED = 1;
$gdb = new Devel::GDB();
print $gdb->get('info functions', $timeout, $prompt, $notyet, $alldone);
The "Devel::GDB" package provides an interface for communicating with GDB. Internally, it uses the GDB/MI interpreter (see <http://sourceware.org/gdb/current/onlinedocs/gdb_25.html>), which accurately informs the caller of the program state and, through the use of tokens, guarantees that the results returned actually correspond to the request sent. By contrast, GDB's console interpreter returns all responses on "STDOUT", and thus there is no way to ensure that a particular response corresponds to a particular request.
Therefore, it is obviously preferable to use GDB/MI when programmatically interacting with GDB. This can be done via the "send_cmd" family of functions ("send_cmd", "send_cmd_excl", and "send_cmd_async"). There are, however, some cases when there is no GDB/MI command corresponding to a particular console command, or it has not yet been implemented (for example, "-symbol-type", corresponding to the console command "ptype", is not yet implemented as of GDB 6.6). In this case, the "get" function provides a workaround by capturing all output sent to the console stream.
$gdb = new Devel::GDB( '-use-threads' => 1 );
'-params' => $extra_gdb_params );
Spawns a new GDB process. In threaded mode, this also spawns a listening thread that asynchronously processes responses from GDB; in non-threaded mode, the caller is responsible for handling asynchronous output (that is, output from GDB that is not directly solicited by a request). See "demux", "get_reader", and the "Non-threaded Usage" example for further discussion.
The parameters to the constructor are passed in hash form. The following parameters control how GDB is invoked:
The following parameters control how to handle interaction with the inferior process, the program being debugged. The default behavior is to give the inferior process control of the terminal while it is running, returning control to perl when the program is suspended or stopped (emulating the behavior of gdb). However, this only works when "STDIN" is associated with a tty. Two other (mutually exclusive) options are available:
Miscellaneous parameters:
Threaded mode is the easiest to deal with, as it does not require the caller to interact with the GDB filehandles directly; for a simple non-threaded example, see the "Non-threaded Usage" example.
$fn = sub { return readline($_[0]->get_reader); }
Typically, in non-threaded mode, the caller will be using "select" to multiplex multiple file streams (e.g. "STDIN" and "get_reader"); in this case, you will likely want to specify a value for "-readline-fn" which, at a minimum, uses "sysread" rather than "readline".
$response = $gdb->send_cmd($command)
Send $command to GDB, and block until a response is received. In threaded mode, this does not prevent other threads from simultaneously sending requests.
The $command can be a GDB/MI command, prefixed with a hyphen (e.g. "-exec-run") or a console command ("run"). However, the response returned will always be a GDB/MI response, so "$gdb->send_cmd("info variables")" will only return "done"; the actual output you probably wanted will be dumped into the console stream. To execute console commands and capture the output sent back to the console, use "get".
$gdb->send_cmd_excl($cmd, $before_fn, $after_fn)
Send $cmd to GDB in exclusive mode. In threaded mode, this means that other "send_cmd" and "send_cmd_excl" calls will not coincide with this call. In non-threaded mode, this ensures that any pending "send_cmd_async" calls are processed before proceeding.
If provided, the $before_fn and $after_fn functions will, respectively, be called before the command is sent (after the exclusive lock is acquired) and after the result has been received (before the exclusive lock is released).
$gdb->send_cmd_excl($cmd, $callback_fn)
Not yet implemented.
Send $cmd to GDB in async mode. This returns immediately, rather than blocking until a response is received; instead, the $callback_fn callback function is called, with the response as the first argument.
This will likely only be supported in non-threaded mode.
$gdb->get($command)
Issues the $command to GDB, and returns all output sent to the console output stream. Note that there is no way to ensure that the output "belongs" to a particular command, so it is possible that spurious output will be included! In particular, if you call "$gdb->get($command)" immediately after creating the "Devel::GDB" object, and don't suppress GDB's initialization messages (by passing "-q" to "-params"), some of these messages may end up in the response to "get".
In list context, returns "($buffer, $error)", with exactly one of the two defined; $buffer is the text captured from the console stream and $error is the GDB/MI error message. In scalar context, only $buffer is returned ("undef" if there was an error).
$gdb->get($command, $timeout, $prompt, $notyet, $alldone)
This version of "get" is used when $Devel::GDB::DEPRECATED is true, and provides backwards compatibility with older versions of "Devel::GDB". It is not compatible with any of the new features (e.g. "send_cmd", threaded mode) and will be removed in future versions.
This method is flawed in a number of ways: the semantics of when $notyet is called are unclear, the handling of $timeout is broken, and most importantly, the fact that it allows execution to be interrupted can put the module into an inconsistent state.
No new code should use this function.
In non-threaded mode, the caller will need this filehandle in its "-readline-fn"; in addition, to support asynchronous GDB responses, the caller should pass lines read from this filehandle to "demux".
$gdb->demux($line)
Process a line read from the GDB stream (see "get_reader"). This should only be called in non-threaded mode. (See example: "Non-threaded Usage")
use Devel::GDB;
use IO::BufferedSelect;
my $gdb = new Devel::GDB( '-use-threads' => 0,
'-readline-fn' => \&message_loop );
my $gdb_fh = $gdb->get_reader;
my $bs = new IO::BufferedSelect(\*STDIN, $gdb_fh);
sub message_loop
{
my @result = $bs->read_line($gdb_fh);
return @result ? $result[0][1] : undef;
}
OUTER:
while(1)
{
my @ready = $bs->read_line();
foreach( @ready )
{
my ($fh, $line) = @$_;
defined($line) or last OUTER;
chomp $line;
if($fh == \*STDIN)
{
print STDERR "RECEIVED: $line\n";
my $result = $gdb->get($line);
last unless defined($result);
print STDERR $result;
}
else
{
$gdb->demux($line);
}
}
}
Here's a simple example that communicates with an inferior process (in this case, "tr") using the "Expect" module.
use strict;
use warnings;
use threads;
use Devel::GDB;
my $gdb = new Devel::GDB( '-create-expect' => 1 );
my $e = $gdb->get_expect_obj;
$gdb->send_cmd("file tr");
$gdb->send_cmd("set args a-zA-Z A-Za-z");
$gdb->send_cmd("-exec-run");
$e->send("one TWO\n");
$e->send("ONE two\n");
$e->expect(undef, '-re', '^.+$')
and $e->match =~ /^ONE two/
and print "ok 1\n"
or die;
$e->expect(undef, '-re', '^.+$')
and $e->match =~ /^one TWO/
and print "ok 2\n"
or die;
$gdb->end;
$e->slave->close;
$e->expect(undef);
printf "EXPECT(EOF): %s\n", $e->before;
Here's an example that spawns an xterm and runs the inferior process inside it. Commands are read from STDIN, and responses written to STDERR.
use strict;
use warnings;
use threads;
use Devel::GDB;
use IO::Pty;
use POSIX;
sub set_termios_lflag($$$)
{
my($fd, $flag, $value) = @_;
my $termios = new POSIX::Termios;
$termios->getattr($fd);
$termios->setlflag($value ? ($termios->getlflag | $flag) : ($termios->getlflag & ~$flag));
$termios->setattr($fd);
undef $termios;
}
my $pty = new IO::Pty;
# Disable echo temporarily
set_termios_lflag(fileno($pty), &POSIX::ECHO, 0);
# Fork an xterm
unless(my $xterm_pid = fork)
{
die "Fork failed" unless defined($xterm_pid);
# Reopen $fd with close-on-exec disabled
my $fd = fileno($pty);
$^F = $fd > $^F ? $fd : $^F;
local *MASTER;
open(MASTER, "<&=$fd") and $fd == fileno(\*MASTER)
or die "Failed reopening pty handle";
my $cmd = "xterm -Sxx$fd";
print "calling exec($cmd)\n";
exec($cmd);
die "exec() failed: $!";
}
# xterm likes to write its window id to the pty; eat it up
# (echo is disabled so the inferior process doesn't see this output)
my $window_id = readline($pty->slave);
# Now turn echo back on
set_termios_lflag(fileno($pty), &POSIX::ECHO, 1);
# No longer need the master (but don't close the slave!)
close $pty;
# Create the GDB object, telling the inferior process to use the new xterm's pty
my $gdb = new Devel::GDB( '-use-tty' => $pty->ttyname );
while(<STDIN>)
{
chomp;
if(/^Z/)
{
$gdb->interrupt;
next;
}
my $result = $gdb->send_cmd($_);
last unless defined($result);
print STDERR "[GDB] $result\n";
}
$gdb->end;
There are a number of features that will be made available in future versions of "Devel::GDB". Among them:
Devel::GDB::LowLevel
Antal Novak <afn@cpan.org>, Josef Ezra <jezra@cpan.org>
Copyright (C) 2007 by Antal Novak & Josef Ezra
This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself, either Perl version 5.8.8 or, at your option, any later version of Perl 5 you may have available.
| 2022-11-20 | perl v5.36.0 |