Symbol names

Marpa reserves, for its internal use, all symbol names ending with one of these four symbols: the right square bracket (""]""), the right parenthesis ("")""), the right angle bracket ("">""), and the right curly bracket (""}""). Any other valid Perl string is an acceptable symbol name.

Terminal symbols

Marpa defines a terminal as a symbol which is valid as an input token symbol. By default, the terminals are those symbols who do not appear on the LHS of any rule.

Marpa will allow any non-nulling symbol to be a terminal, even those which appear on the LHS of one or more rules. To allow (or disallow) use of a symbol as a terminal, the application can use the "terminals" named argument, and the "terminal" property. An attempt to use a nulling symbol as a terminal is a fatal error.

Sequence rules

It is very common in a grammar for one symbol to produce a repeating sequence. Marpa allows a shorthand for this: sequence rules. The RHS of a sequence rule will be repeated, as specified by the "min" rule property. In sequence rules the RHS must always be one symbol in length, and that symbol may not be a nullable symbol.

A rule is a sequence rule if the "min" rule property is defined. "min" can be 0 or 1, and specifies the minimum number of times that the sequence is allowed to repeat. As of this writing, the maximum number of repetitions is always infinite.

    { lhs => 'sequence', rhs => ['item'], min => 0, action => 'do_sequence' }

A "min" of zero indicates a sequence that repeats zero or more times. This is the equivalent of using the star quantifier (""*"") in the standard regular expression notation.

    { lhs => 'sequence', rhs => ['item'], min => 1, action => 'do_sequence' }

A "min" of one indicates a sequence that repeats one or more times. This is the equivalent of using the plus quantifier (""+"") in the standard regular expression notation.

Sequences can have a separator, specified with the "separator" rule property. By default, separation is Perl-style: trailing separators are allowed. In ""proper"" separation, a separator must actually separate two sequence items and therefore is not allowed after the last item of a sequence. If you prefer ""proper"" separation, you can set the "proper" rule property.

Advantages of sequence rules

You are never forced to use sequence rules, but it's usually better if you do. When a sequence is written as a sequence rule, Marpa optimizes it.

When a sequence is written using non-sequence rules, the semantics typically wind up being spread over two or three Perl closures. The semantic action for a sequence rule is a single Perl closure. Putting the semantics into a single Perl closure often results in simpler and more natural code. See the section on sequences in the semantics document.

Caveats

Marpa throws an exception if you try to use a nullable symbol as the right hand side of a sequence rule, or as the separator for a sequence rule. The ban on nullables in sequences only applies to sequences when they are written using sequence rules. Nothing prevents you from specifying a sequence of nullables using non-sequence rules. But usually there is no good reason to do this, and sequences of nullables can be highly ambiguous which, for efficiency reasons, makes them a good thing to avoid.

To keep things simple, the right hand side of a sequence rule must be a single symbol. Of course, applications will often want to repeat sequences of multiple symbols. That is easy to do indirectly:

    { lhs => 'sequence', rhs => [qw(item)], min => 0, action => 'do_sequence' },
    { lhs => 'item', rhs => [qw(part1 part2)], action => 'do_item' },

new()

    my $grammar = Marpa::R2::Grammar->new(
        {   start   => 'Expression',
            actions => 'My_Actions',
            default_action => 'first_arg',
            rules   => [
                { lhs => 'Expression', rhs => [qw/Term/] },
                { lhs => 'Term', rhs => [qw/Factor/] },
                { lhs => 'Factor', rhs => [qw/Number/] },
                { lhs => 'Term', rhs => [qw/Term Add Term/], action => 'do_add' },
                {   lhs    => 'Factor',
                    rhs    => [qw/Factor Multiply Factor/],
                    action => 'do_multiply'
                },
            ],
        }
    );

"Marpa::R2::NAIF::Grammar::new" returns a new Marpa grammar object or throws an exception. The arguments to "Marpa::R2::NAIF::Grammar::new" are references to hashes of named arguments. In each key/value pair of this hash, the hash key is the argument name and the hash value is the value of the named argument. The available named arguments are described below.

precompute()

    $grammar->precompute();

The "precompute" method compiles data structures that the recognizer will need. It returns the grammar object or throws an exception.

set()

    $grammar->set( { trace_file_handle => $trace_fh } );

The arguments to the "set" method are references to hashes of named arguments. The available named arguments are described below. "set" either returns true or throws an exception.

check_terminal()

Returns a Perl true when its argument is the name of a terminal symbol. Otherwise, returns a Perl false. Not often needed, but a lexer may find this the most convenient way to determine if a symbol is a terminal.

rule()

    my ( $lhs, @rhs ) = $grammar->rule($rule_id);

Given a rule ID as its argument, returns an array containing the symbols of the rule. The "rule()" method returns a Perl false if no rule with that rule ID exists. If the rule ID exists, the rule's LHS symbol is the first symbol in the array, and rest of the array contains the rule's RHS symbols in order. Situations where Rule ID's are encountered include callbacks and use of the progress method.

rule_ids()

    my @rule_ids = $grammar->rule_ids();

Returns an array containing the valid rule IDs. Situations where Rule ID's are encountered include callbacks and use of the progress method.

show_problems()

    print $grammar->show_problems()
        or die "print failed: $ERRNO";

Usually the application does not call this method directly. Returns a string describing any serious but non-fatal problems a grammar had in the precomputation phase. A serious problem is one that will prevent parsing. Warnings are not serious problems in this sense. If there were no serious problems, returns a string saying so. This method is not useful before precomputation.

In Marpa, most serious grammar problems are not immediately thrown as exceptions. This is because there can be a number of serious problems in a grammar, particularly one that is large or in an early draft. If each serious problem caused an immediate exception, the user would have to fix them one at a time -- very tedious.

The recognizer throws an exception when the user attempts to create a parse from a grammar with serious problems. When that happens, the string returned by "show_problems" is part of the error message.

show_rules()

    print $grammar->show_rules()
        or die "print failed: $ERRNO";

Returns a string listing the rules. Each rule is shown with comments which indicate rule properties. "show_rules" is useful in debugging grammars.

Marpa does extensive rewriting of its grammars, and both the original rules and the rewritten rules appear in the "show_rules" list. When a rule is rewritten, the original rule is often not used. In that case, ""!used"" will be one of the comments for the original rule. The ""!used"" comment also marks rules not used for reasons other than rewrites. For example, inaccessible and unproductive rules are also marked ""!used"".

The ""discard_sep"" comment indicates that the rule discards separators This is only relevant in sequence rules. Other comments indicate whether rules were nullable, unproductive, inaccessible, or empty.

show_symbols()

    print $grammar->show_symbols()
        or die "print failed: $ERRNO";

Returns a string listing the symbols, along with comments indicating whether they were terminal, nulling, nullable, unproductive or inaccessible. Useful for debugging grammars.

action_object

The "action_object" named argument specifies a Perl class name to be used in resolving action names to Perl closures. A "new" constructor must be defined in the "action_object" package. It will be used to create the per-parse-tree variables. The per-parse-tree variable is passed to rule evaluation closures, as their first argument. Details are in the document on semantics.

actions

            actions => 'My_Actions',

The "actions" named argument specifies the Perl package that Marpa will use when resolving action names to Perl closures. If both an "actions" named argument and an "action_object" named argument are specified, the package from the "actions" named argument is the only one used to resolve action names. The "actions" package is treated only as a package, and not as a class. Any "new" constructor in the "actions" package is ignored. Details are given in the document on semantics.

default_action

            default_action => 'first_arg',

The "default_action" named argument specifies the value action name for rules without an "action" property. Details are given in the document on semantics.

default_empty_action

The "default_empty_action" named argument specifies the action for empty (zero length) rules which have no action specified explicitly. Details are given in the document on semantics.

inaccessible_ok

The value must be a reference to an array of symbol names. By default, Marpa warns if a symbol is inaccessible, but the warning is suppressed for any symbol named in the array. Setting the "inaccessible_ok" named argument after grammar precomputation is useless, and itself results in a warning.

Inaccessible symbols are symbols which cannot be derived from the start symbol, and which therefore can never be part of a successful parse. Inaccessible symbols often indicate errors in grammar design. But a user may have plans for these symbols, may wish to keep them as notes, or may simply wish to deal with them later.

infinite_action

Takes as its value a string specifying what Marpa should do if it discovers that its grammar is infinitely ambiguous. The value must be one of ""fatal"", ""warn"" or ""quiet"". A grammar is infinitely ambiguous if there is some input for which it produces an endless number of parses.

If the value is ""fatal"", Marpa throws an exception when it encounters an infinitely ambiguous grammar. This is the default and will usually be what the user wants. In most cases, an infinitely ambiguous grammar is simply a mistake.

""quiet"" indicates that the user wants to allow infinitely ambiguous grammars. ""warn"" indicates that the user wants to allow infinitely ambiguous grammars, but wants a warning message to be printed to the trace file handle.

rules

The value of the "rules" named argument is a reference to an array of rule descriptors. The "rules" named argument may be specified multiple times, adding new rules to the grammar each time. New rules may be added until the grammar is precomputed. The format of rule descriptors is explained below.

source

The value of the "source" named argument is a reference to string that contains a description of the grammar in BNF format. The format of this string is described in the document on the BNF format. The "source" named argument may only be specified once, and it cannot be used together with the "rules" named argument.

start

    start => 'Expression',

The value of the "start" named argument must be a symbol name. It will be used as the start symbol for the grammar. The "start" named argument is required.

symbols

The value of the "symbols" named arguments must be a reference to a hash. In each key/value pair of this hash, the hash key is the symbol property name and the hash value is the symbol descriptor. Symbol descriptors are described below.

Note that the value of "symbols" named argument is a hash, but the value of the "rules" named argument is an array. This is because symbol names make convenient hash keys. For rules, there is no equally natural choice for a hash key.

terminals

The value of the "terminals" named argument must be a reference to an array of symbol names. All the symbols in the array will be allowed as terminals. See the discussion of terminals above.

trace_file_handle

The value is a file handle. Trace output and warning messages go to the trace file handle. By default the trace file handle is "STDERR".

unproductive_ok

The value must be a reference to an array of symbol names. By default, Marpa warns if a symbol is unproductive, but the warning is suppressed for any symbol named in the array. Setting the "unproductive_ok" named argument after grammar precomputation is useless, and itself results in a warning.

Unproductive symbols are symbols which can never derive a sentence. (A sentence is a string of zero or more terminals.) That means that unproductive symbols can never be part of a successful parse. Unproductive symbols often indicate errors in grammar design. But a user may have plans for these symbols, may wish to keep them as notes, or may simply wish to deal with them later.

warnings

The value is a boolean. Warnings are written to the trace file handle. By default, warnings are on. Usually, an application will want to leave them on. If warnings are turned off, turning them back on after grammar precomputation is useless, and itself results in a warning.

Rule descriptors as hashes

The long form descriptor of a rule is a reference to a hash of rule properties. In each key/value pair of this hash, the hash key is the rule property name and the hash value is the value of that property.

action

The value of the "action" rule property is a string which specifies the semantics for the rule. For details, see the document on semantics.

The semantics of nulling symbols are dealt with on a per-symbol basis, rather than a per-rule basis. For this reason the "action" rule property is useless for empty rules. An exception is thrown if an "action" property is defined for an empty rule.

keep

Separators in sequence rules are usually not semantically significant. By default, Marpa throws away separators during parse tree traversal and before node evaluation time, so that the semantic actions do not see the separators.

If the value of the "keep" rule property is a Perl true, Marpa keeps separators. This allows the semantic actions to examine them. The downside is that the work of distinguishing sequence separators from sequence items is pushed into the semantic actions. For details about the semantics, see the document on semantics.

lhs

The value of the "lhs" rule property must be a string containing the name of the rule's left hand side symbol. Every Marpa rule must have a left hand side symbol.

min

"min" must be 0, 1, or undefined. If "min" is 0 or 1, the rule is a sequence rule. If "min" is undefined, the rule is an ordinary BNF rule.

Only one symbol, called the sequence item, is allowed on the right hand side of a sequence rule. The sequence item may not be a nullable symbol. The input will be required to match the sequence item at least "min" times and will be allowed to match the sequence item an unlimited number of times.

null_ranking

"null_ranking" is ignored unless the recognizer's "ranking_method" named argument is set to something other than its default. The "null_ranking" named argument allows the application to control the order in which rules with nullable symbols are returned by the "value" method. Such rules can match the same input in several ways depending on which symbols are nulled. These different ways of nulling symbols in a rule are called its null variants.

If "null_ranking" is undefined, the order of the null variants will be arbitrary. This is the default, and is acceptable to most applications. For details on using the "null_ranking" named argument, see the document on parse order.

proper

By default, sequence rules with separators allow trailing separators, Perl-style. If the "proper" rule property is a Perl true, ""proper"" separation is enforced. In proper separation, separation must actually separate sequence items, and trailing separators are not allowed.

rank

"rank" is ignored unless the recognizer's "ranking_method" named argument is set to something other than its default. The range allowed for "rank" is implementation-defined, but numbers in the range between -134,217,727 and 134,217,727 will always be allowed. "rank" is 0 by default. For details on using the "rank" named argument, see the document on parse order.

rhs

The value of the "rhs" property is a reference to an array of strings containing the names of the rule's right hand symbols, in order. This array may be zero length, in which case this is an empty rule -- a rule with no symbols on the right hand side. A rule is also empty if there is no "rhs" specifier in its descriptor.

separator

Any sequence rule may have a "separator" defined. The value must be a symbol name. By default, Marpa allows trailing separators. This is the usual style in Perl. The separator must not be a nullable symbol.

Rule descriptors as arrays

    rules => [
        [ 'E', [qw/E Add E/],      'do_add' ],
        [ 'E', [qw/E Multiply E/], 'do_multiply' ],
        [ 'E', [qw/Number/], ],
    ],

Rule descriptors may be given in "short form" -- as a reference to an array. The elements of the array, in order, are the "lhs" property, the "rhs" property, and the "action" property. The last two are optional. Omission of an optional property in a short form descriptor has the same effect that omitting the same optional property would have in the long form.

Duplicate rules

Marpa throws an exception if a duplicate rule is added. Two BNF rules are considered duplicates if

• Both rules have the same left hand symbol.
• Both rules have the same right hand symbols in the same order.

Sequence rules are even more restricted. The LHS of a sequence rule may not be the LHS of another sequence rule. The LHS of a sequence rule also may not be the LHS of any BNF rule.

This restriction on the LHS of sequence rules is intended to make the definition of duplicate rules intuitive and their detection easy. It does not limit the expressiveness of Marpa grammars, because it is very easy to work around. One workaround to create an intermediate rule of length one, whose RHS is the sequence LHS symbol. The LHS of the intermediate rule can then be used, without restriction, as the LHS of other rules.

terminal

A boolean. If true, it allows the symbol to be used as a terminal. If false, it disallows use of the symbol as a terminal. For details, see the section on terminals.