DOKK
/
manpages
/
debian 12
/
linuxcnc-uspace
/ pi500_vfd.1.en
PI500_VFD(1)
HAL Component
PI500_VFD(1)
NAME
pi500_vfd - Powtran PI500 Modbus driver
SYNOPSIS
pi500_vfd
PINS
pi500-vfd.
N
.commanded-frequency
float in
Frequency of vfd
pi500-vfd.
N
.run
bit in
run the vfd
pi500-vfd.
N
.enable
bit in
1 to enable the vfd. 0 will remote trip the vfd, thereby disabling it.
pi500-vfd.
N
.is-running
bit out
1 when running
pi500-vfd.
N
.is-at-speed
bit out
1 when running at assigned frequency
pi500-vfd.
N
.is-ready
bit out
1 when vfd is ready to run
pi500-vfd.
N
.is-alarm
bit out
1 when vfd alarm is set
pi500-vfd.
N
.motor-current
float out
Output current in amps
pi500-vfd.
N
.heatsink-temp
float out
Temperature of drive heatsink
pi500-vfd.
N
.watchdog-out
bit out
Alternates between 1 and 0 after every update cycle. Feed into a watchdog component to ensure vfd driver is communicating with the vfd properly.
PARAMETERS
pi500-vfd.
N
.mbslaveaddr
u32 rw
Modbus slave address
LICENSE
GPLv2 or greater
2023-02-10
LinuxCNC Documentation