lpc21isp - Is an in-circuit programming (ISP) tool for the
NXP(Philips) microcontrollers
lpc21isp |
[[Options]]
[file[ file[]
[comport]
[baudrate]
[Oscillator_in_kHz]
|
lpc21isp |
[-bin]
[-hex]
[-term]
[-termonly]
[-localecho]
[-detectonly]
[-debug0]
[-debug3]
[-debug5]
[-donotstart]
[-try<n>]
[-wipe]
[-control]
[-controlswap]
[-controlinv]
[-verify]
[-logfile]
[-halfduplex]
[-ADARM]
[-PHILIPSARM]
|
lpc21isp is an in-circuit programming (ISP) tool for the
NXP(Philips) LPC1100/LPC1300/LPC1700/LPC2000 series ARM7/Cortex-M0/Cortex-M3
microcontrollers.
- -bin
- for uploading binary file
- -hex
- for uploading file in intel hex format (default)
- -term
- for starting terminal after upload
- -termonly
- for starting terminal without an upload
- -localecho
- for local echo in terminal
- -detectonly
- detect only used LPC chiptype (PHILIPSARM only)
- -debug0
- for no debug
- -debug3
- for progress info only
- -debug5
- for full debug
- -donotstart
- do not start MCU after download
- -try<n>
- try n times to synchronise
- -wipe
- Erase entire device before upload
- -control
- for controlling RS232 lines for easier booting (Reset = DTR,
EnableBootLoader = RTS)
- -controlswap
- swap RS232 control lines (Reset = RTS, EnableBootLoader = DTR)
- -controlinv
- Invert state of RTS & DTR (0=true/assert/set,
1=false/deassert/clear).
- -verify
- Verify the data in Flash after every writes to sector. To detect errors in
writing to Flash ROM
- -logfile
- for enabling logging of terminal output to lpc21isp.log
- -halfduplex
- use halfduplex serial communication (i.e. with K-Line)
- -ADARM
- for downloading to an Analog Devices ARM microcontroller ADUC70xx
- -PHILIPSARM
- for downloading to a microcontroller from NXP(Philips)
LPC13xx/LPC17xx/LPC2000 family (default)