| LUA-URI(3) | Lua uri module | LUA-URI(3) |
lua-uri - Lua module for manipulating URIs
The URI module doesn't alter any global variables when it loads, so you can decide what name you want to use to access it. You will probably want to load it like this:
local URI = require "uri"
You can use a variable called something other than "URI" if you'd like, or you could assign the table returned by "require" to a global variable. In this documentation we'll assume you're using a variable called "URI".
When you create a URI object, the string you supply is checked to make sure it conforms to the appropriate standards. If everything is OK, the new object will be returned, otherwise nil and an error message will be returned. You can convert any errors into Lua exceptions using the "assert" function.
local URI = require "URI"
local uri = assert(URI:new("http://example.com/foo"))
-- In this case, these will print the original string.
-- They are both the same.
print(tostring(uri))
print(uri:uri())
You can extract individual parts of the URI with various accessor methods:
print(uri:scheme()) -- http
print(uri:host()) -- example.com
print(uri:path()) -- /foo
Some URIs will be 'normalized' automatically to produce an equivalent canonical version. Nothing will be changed which would affect how the URI will be interpreted. For example:
local uri = assert(URI:new("HTTP://EXAMPLE.COM:80/FOO"))
print(tostring(uri)) -- http://example.com/FOO
In this case the scheme and hostname were both converted to lowercase (but not the path part, because that's case sensitive). The port number was also removed because port 80 is the default anyway for HTTP URIs.
If you just want to make sure a URI is correct, but without throwing an exception, use code like this:
local uri, err = URI:new(uri_to_test)
if uri then
print("valid, normalized to " .. tostring(uri))
else
print("invalid, error message is " .. err)
end
(Note that many invalid URIs will get processed as relative URI references, so if you're expecting an absolute URI it's also a good idea to check that the "is_relative" method returns false.)
To make a copy of a URI object, pass it to the constructor:
local original = URI:new("http://www/foo")
local copy = URI:new(original)
The two objects will contain the same information, but can be changed independently.
A relative URI reference is not a complete URI. It doesn't have a scheme, so it doesn't really mean anything until it is resolved against an absolute URI. For this reason, when you create a URI object from a relative URI, it will belong to the special class "uri._relative". There is very little you can do with a relative URI object other than get and set its path, query string, and fragment identifier.
Relative URI objects can be created in the same way as absolute ones:
local uri = assert(URI:new("../path?query#fragment"))
print(uri:is_relative()) -- true
print(uri._NAME) -- uri._relative
There are two ways to resolve a relative URI reference against an absolute URI to get another absolute URI. One is to create a new URI object, passing the base URI as a second argument to the constructor:
local rel = assert(URI:new("../quux.html"))
local base = assert(URI:new("http://example.com/foo/bar/"))
local abs = assert(URI:new(rel, base))
print(tostring(abs)) -- http://example.com/foo/quux.html
You can also do this by passing strings to "new", instead of objects:
local abs = assert(URI:new("../quux.html",
"http://example.com/foo/bar/"))
print(tostring(abs)) -- http://example.com/foo/quux.html
Alternatively, a URI object containing a relative URI can be made absolute without creating a new object using the "resolve" method:
local uri = assert(URI:new("../quux.html"))
local base = assert(URI:new("http://example.com/foo/bar/"))
uri:resolve(base)
print(tostring(uri)) -- http://example.com/foo/quux.html
The reverse process can be carried out with the "relativize" method, creating a relative URI from an absolute one, where the relative URI can be later resolved against a particular base URI:
local uri = assert(URI:new("http://example.com/foo/quux.html"))
local base = assert(URI:new("http://example.com/foo/bar/"))
uri:relativize(base)
print(tostring(uri)) -- ../quux.html
It is possible for a relative URI to have an authority part, although this is very rare in practice. It is unlikely that you'll ever need to do this, but you can create a URI like this:
local uri = assert(URI:new("//example.com/path"))
This is a complete list of the methods you can call on a generic "URI" object once created by calling "new". Some URIs are created in more specific classes (listed in the URI schemes section), which may have additional methods. Arguments shown in square brackets below are optional.
Note that all the accessor methods, like "path" and "uri", can be used just to return the current value (if they are called without an argument), or can set a new value while returning the old value. Passing nil as the argument is generally different from not passing an argument at all, or to passing an empty string.
local uri = assert(URI:new("http://example.com:123/"))
print(uri:default_port()) -- 80
This can also be called as a stand-alone function if you don't know whether either URI is an object or a string. For example:
print(URI.eq("http://example.com",
"HTTP://EXAMPLE.COM/"))
If either value is a string which isn't a valid URI, this will throw an exception. It will however accept relative URIs, and they will be compared as normal. A relative URI is never equal to an absolute one.
There is no less-than comparison function, as URIs don't have any particular ordering. If you want to sort URI objects you're best bet is probably just to compare the string versions:
function urisort (a, b)
return a:uri() < b:uri()
end
table.sort(t, urisort)
If "newvalue" is supplied, changes the fragment to the new value, percent encoding any characters which would not be valid in a fragment part. Any percent encoding already done on the string will be left in place (not double encoded). If "newvalue" is nil then any existing fragment will be removed.
The syntax of fragments are meaningful only for particular media types of resources, so there is no special behaviour for different URI schemes.
When setting a new host, the value is normalized to lowercase. An invalid value will cause an exception to be thrown. The value can be an empty string to indicate the default host.
Setting the value to nil will cause the host to be removed altogether, leaving the URI with no authority component. This will throw an exception if there is a userinfo or port component in the URI, because it is impossible to represent a URI with no host when there is an authority component.
Some URI schemes may throw an exception when setting the host to nil or the empty string, and others when setting it to anything other than nil, if those schemes require or disallow authority components.
The implementation in the "uri" class itself changes the class of the object to the one appropriate to the scheme (if there is a more specific class available). It also removes the port number from the authority component if it is unnecessary because the scheme defines it as the default port. Finally, if there is a more specific class available it calls the "init" method in that.
"init" is called after the URI has been split into components according to the generic syntax, so it can use the accessor methods to get at them. It should return the same values as "new", either the new URI object (the object it was called on), or nil and an error message.
local uri = assert(URI:new("http://example.com/foo"))
local old = uri:path("/bar/")
print(old) -- /foo
print(uri:path()) -- /bar/
When a new path value is supplied, it can already be percent encoded, but any characters which aren't allowed are encoded as well. Percent characters are not encoded themselves, because they are assumed to be part of the existing encoding. The existing percent encoding is normalized, and any invalid encoding will cause an exception.
There are certain paths which cannot be expressed in the URI syntax. A path which does not start with a "/" character (unless it's completely empty) cannot be represented when there is an authority component, so this will cause an exception to be thrown. A path which starts with "//" when there is no authority component would be misinterpreted, so the second slash is percent encoded.
Some URI schemes may impose further restrictions on what is allowed in a path, so other path values may cause exceptions in certain cases.
If "newvalue" is supplied it should be a non-negative integer number, or a string containing only digits, or nil to remove any existing port number. An exception is thrown if it is an invalid value, or if the URI scheme doesn't allow port numbers to be specified. If there is currently no authority part in the URI, then an empty host will be added to create one.
If the port number is the default for a URI scheme (the same as the number returned from the "default_port" method), then the "port" method will return that number, but the number won't actually be shown in the URI when it is represented as a string, because it would be redundant. Setting the port number to nil has the same effect as setting it to the default port number.
If "newvalue" is supplied it should be the new string, or nil to remove any existing query part. The query part can be an empty string, which is different from it not being present at all (the "?" character will still be included to indicate that there is a query part, even if it is not followed by anything else). Any characters which would not be valid in a query part will be percent encoded, but any percent encoding already done on the string will be left in place (not double encoded).
The base-class implementation of this method never throws exceptions, but some scheme-specific classes may throw exceptions if they impose constraints on the syntax of query parts.
Has no effect if "uri" is already an absolute URI. Throws an exception if "base" is not an absolute URI, or if the new URI formed by combining them would be invalid for the given scheme.
See also the section Relative URIs and the "uri:relativize(base)" method.
Throws an exception if "newvalue" is nil or not a valid scheme, or if the rest of the URI is not valid when interpreted with the new scheme. After calling this method the class of the object may have been changed, if the old class is not appropriate for the new value.
Has no effect if "uri" is already relative, or if there is no way to create an appropriate relative URI (so the URI will remain absolute for example if "base" has a different scheme from "uri"). Throws an exception if "base" is not absolute.
This method will never result in a network-path reference (a relative URI which includes an authority part). In cases where that would be possible the value in "uri" will be left as an absolute URI, which is less likely to cause problems.
See also the section Relative URIs and the "uri:resolve(base)" method.
If an argument is supplied, this replaces the URI in the "uri" object with a different one. "newvalue" must be a complete new URI or relative URI reference in a string, or a URI object.
This is equivalent to creating a new URI object by calling "URI:new", except that instead of creating a new object the existing object is updated with the new information. It is also not possible to pass a base URI to the "uri" method.
Throws an exception if "newvalue" is nil or if there is any error in parsing the new URI string. After calling this method the class of the object may have been changed, if the old class is not appropriate for the new value.
If "newvalue" is nil then any existing userinfo part is removed.
The following Lua modules provide classes which implement extra validation and normalization, or provide extra methods, for URIs which specific schemes:
Other Lua modules provide additional functionality used in the library, or act as base classes for the scheme-specific classes:
The parsing of URI syntax is based primarily on "RFC 3986".
This software and documentation is Copyright (c) 2007 Geoff Richards <geoff@geoffrichards.co.uk>. It is free software; you can redistribute it and/or modify it under the terms of the Lua 5.0 license. The full terms are given in the file COPYRIGHT supplied with the source code package, and are also available here: <http://www.lua.org/license.html>
An older unreleased version of this library was created as a direct port of the Perl URI library, by Gisle Aas and others. It has since been rewritten with a somewhat different design.
| 2012-00-00 | 1.1 |