| LVMCONFIG(8) | System Manager's Manual | LVMCONFIG(8) |
lvmconfig — Display and manipulate configuration information
lvmconfig
[ option_args ]
[ position_args ]
lvmconfig, lvm config, lvm dumpconfig (for compatibility reasons, to be phased out) produce formatted output from the LVM configuration tree. The sources of the configuration data include lvm.conf(5) and command line settings from --config.
lvmconfig
Common options for lvm:
--atversion String
Specify an LVM version in x.y.z format where x is the major version, the y is
the minor version and z is the patchlevel (e.g. 2.2.106). When configuration
is displayed, the configuration settings recognized at this LVM version will
be considered only. This can be used to display a configuration that a
certain LVM version understands and which does not contain any newer
settings for which LVM would issue a warning message when checking the
configuration.
--commandprofile String
The command profile to use for command configuration. See lvm.conf(5)
for more information about profiles.
--config String
Config settings for the command. These override lvm.conf(5) settings.
The String arg uses the same format as lvm.conf(5), or may use
section/field syntax. See lvm.conf(5) for more information about
config.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the detail of messages
sent to the log file and/or syslog (if configured).
--devices PV
Restricts the devices that are visible and accessible to the command. Devices
not listed will appear to be missing. This option can be repeated, or
accepts a comma separated list of devices. This overrides the devices
file.
--devicesfile String
A file listing devices that LVM should use. The file must exist in
/etc/lvm/devices/ and is managed with the lvmdevices(8)
command. This overrides the lvm.conf(5) devices/devicesfile
and devices/use_devicesfile settings.
--driverloaded y|n
If set to no, the command will not attempt to use device-mapper. For testing
and debugging.
-f|--file String
Write output to the named file.
-h|--help
Display help text.
--ignoreadvanced
Exclude advanced configuration settings from the output.
--ignorelocal
Ignore the local section. The local section should be defined in the
lvmlocal.conf file, and should contain config settings specific to the local
host which should not be copied to other hosts.
--ignoreunsupported
Exclude unsupported configuration settings from the output. These settings are
either used for debugging and development purposes only or their support is
not yet complete and they are not meant to be used in production. The
current and diff types include unsupported settings in their
output by default, all the other types ignore unsupported settings.
--journal String
Record information in the systemd journal. This information is in addition to
information enabled by the lvm.conf log/journal setting. command: record
information about the command. output: record the default command output.
debug: record full command debugging.
-l|--list
List config settings with summarizing comment. This is the same as using
options --typeconfig list --withsummary.
--lockopt String
Used to pass options for special cases to lvmlockd. See lvmlockd(8) for
more information.
--longhelp
Display long help text.
--mergedconfig
When the command is run with --config and/or --commandprofile (or using
LVM_COMMAND_PROFILE environment variable), --profile, or --metadataprofile,
merge all the contents of the "config cascade" before displaying
it. Without merging, only the configuration at the front of the cascade is
displayed. See lvm.conf(5) for more information about config.
--metadataprofile String
The metadata profile to use for command configuration. See lvm.conf(5)
for more information about profiles.
--nohints
Do not use the hints file to locate devices for PVs. A command may read more
devices to find PVs when hints are not used. The command will still perform
standard hint file invalidation where appropriate.
--nolocking
Disable locking. Use with caution, concurrent commands may produce incorrect
results.
--profile String
An alias for --commandprofile or --metadataprofile, depending on the
command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and --verbose. Repeat once
to also suppress any prompts with answer 'no'.
--showdeprecated
Include deprecated configuration settings in the output. These settings are
deprecated after a certain version. If a concrete version is specified with
--atversion, deprecated settings are automatically included if the specified
version is lower than the version in which the settings were deprecated. The
current and diff types include deprecated settings in their output by
default, all the other types ignore deprecated settings.
--showunsupported
Include unsupported configuration settings in the output. These settings are
either used for debugging or development purposes only, or their support is
not yet complete and they are not meant to be used in production. The
current and diff types include unsupported settings in their output by
default, all the other types ignore unsupported settings.
--sinceversion String
Specify an LVM version in x.y.z format where x is the major version, the y is
the minor version and z is the patchlevel (e.g. 2.2.106). This option is
currently applicable only with --typeconfig new to display all configuration
settings introduced since given version.
-t|--test
Run in test mode. Commands will not update metadata. This is implemented by
disabling all metadata writing but nevertheless returning success to the
calling function. This may lead to unusual error messages in multi-stage
operations if a tool relies on reading back metadata it believes has changed
but hasn't.
--typeconfig
current|default|diff|full|list|missing|new|profilable|profilable-command|profilable-metadata
current prints the config settings that would be applied to an lvm
command (assuming the command does not override them on the command line.)
This includes: settings that have been modified in lvm config files,
settings that get their default values from config files, and default
settings that have been uncommented in config files. default prints
all settings with their default values. Changes made in lvm config files are
not reflected in the output. Some settings get their default values
internally, and these settings are printed as comments. Other settings get
their default values from config files, and these settings are not printed
as comments. diff prints only config settings that have been modified
from their default values in config files (the difference between current
and default.) full prints every setting uncommented and set to the
current value, i.e. how it would be used by an lvm command. This includes
settings modified in config files, settings that usually get defaults
internally, and settings that get defaults from config files. list
prints all config names without values. missing prints settings that
are missing from the lvm config files. A missing setting that usually gets
its default from config files is printed uncommented and set to the internal
default. Settings that get their default internally and are not set in
config files are printed commented with the internal default. new
prints config settings that have been added since the lvm version specified
by --sinceversion. They are printed with their default values.
profilable prints settings with their default values that can be set
from a profile. profilable-command prints settings with their default
values that can be set from a command profile. profilable-metadata
prints settings with their default values that can be set from a metadata
profile. Also see lvm.conf(5).
--unconfigured
Internal option used for generating config file during build.
--validate
Validate current configuration used and exit with appropriate return code. The
validation is done only for the configuration at the front of the
"config cascade". To validate the whole merged configuration tree,
also use --mergedconfig. The validation is done even if lvm.conf(5)
config/checks is disabled.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the detail of messages
sent to stdout and stderr.
--version
Display version information.
--withcomments
Display a full comment for each configuration node. For deprecated settings,
also display comments about deprecation.
--withgeneralpreamble
Include general config file preamble.
--withlocalpreamble
Include local config file preamble.
--withspaces
Where appropriate, add more spaces in output for better readability.
--withsummary
Display a one line comment for each configuration node.
--withversions
Also display a comment containing the version of introduction for each
configuration node. If the setting is deprecated, also display the version
since which it is deprecated.
-y|--yes
Do not prompt for confirmation interactively but always assume the answer yes.
Use with extreme caution. (For automatic no, see -qq.)
See lvm(8) for information about environment variables used by lvm. For example, LVM_VG_NAME can generally be substituted for a required VG parameter.
lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),
pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8),
vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),
lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),
lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),
dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),
lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)
| LVM TOOLS 2.03.16(2) (2022-05-18) | Red Hat, Inc. |