| VGREDUCE(8) | System Manager's Manual | VGREDUCE(8) |
vgreduce — Remove physical volume(s) from a volume group
vgreduce option_args position_args
[ option_args ]
-a|--all
-A|--autobackup y|n
--commandprofile String
--config String
-d|--debug
--devices PV
--devicesfile String
--driverloaded y|n
-f|--force
-h|--help
--journal String
--lockopt String
--longhelp
--mirrorsonly
--nohints
--nolocking
--profile String
-q|--quiet
--removemissing
--reportformat basic|json
-t|--test
-v|--verbose
--version
-y|--yes
vgreduce removes one or more unused PVs from a VG.
Remove a PV from a VG.
vgreduce VG PV ...
—
Remove all unused PVs from a VG.
vgreduce -a|--all VG
—
Remove all missing PVs from a VG.
vgreduce --removemissing VG
—
Common options for command:
Common options for lvm:
-a|--all
Removes all empty PVs if none are named on the command line.
-A|--autobackup y|n
Specifies if metadata should be backed up automatically after a change.
Enabling this is strongly advised! See vgcfgbackup(8) for more
information.
--commandprofile String
The command profile to use for command configuration. See lvm.conf(5)
for more information about profiles.
--config String
Config settings for the command. These override lvm.conf(5) settings.
The String arg uses the same format as lvm.conf(5), or may use
section/field syntax. See lvm.conf(5) for more information about
config.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the detail of messages
sent to the log file and/or syslog (if configured).
--devices PV
Restricts the devices that are visible and accessible to the command. Devices
not listed will appear to be missing. This option can be repeated, or
accepts a comma separated list of devices. This overrides the devices
file.
--devicesfile String
A file listing devices that LVM should use. The file must exist in
/etc/lvm/devices/ and is managed with the lvmdevices(8)
command. This overrides the lvm.conf(5) devices/devicesfile
and devices/use_devicesfile settings.
--driverloaded y|n
If set to no, the command will not attempt to use device-mapper. For testing
and debugging.
-f|--force ...
Override various checks, confirmations and protections. Use with extreme
caution.
-h|--help
Display help text.
--journal String
Record information in the systemd journal. This information is in addition to
information enabled by the lvm.conf log/journal setting. command: record
information about the command. output: record the default command output.
debug: record full command debugging.
--lockopt String
Used to pass options for special cases to lvmlockd. See lvmlockd(8) for
more information.
--longhelp
Display long help text.
--mirrorsonly
Only remove missing PVs from mirror LVs.
--nohints
Do not use the hints file to locate devices for PVs. A command may read more
devices to find PVs when hints are not used. The command will still perform
standard hint file invalidation where appropriate.
--nolocking
Disable locking. Use with caution, concurrent commands may produce incorrect
results.
--profile String
An alias for --commandprofile or --metadataprofile, depending on the
command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and --verbose. Repeat once
to also suppress any prompts with answer 'no'.
--removemissing
Removes all missing PVs from the VG, if there are no LVs allocated on them.
This resumes normal operation of the VG (new LVs may again be created,
changed and so on). If this is not possible because LVs are referencing the
missing PVs, this option can be combined with --force to have the command
remove any partial LVs. In this case, any LVs and dependent snapshots that
were partly on the missing disks are removed completely, including those
parts on disks that are still present. If LVs spanned several disks,
including ones that are lost, salvaging some data first may be possible by
activating LVs in partial mode.
--reportformat basic|json
Overrides current output format for reports which is defined globally by the
report/output_format setting in lvm.conf(5). basic is the
original format with columns and rows. If there is more than one report per
command, each report is prefixed with the report name for identification.
json produces report output in JSON format. See lvmreport(7)
for more information.
-t|--test
Run in test mode. Commands will not update metadata. This is implemented by
disabling all metadata writing but nevertheless returning success to the
calling function. This may lead to unusual error messages in multi-stage
operations if a tool relies on reading back metadata it believes has changed
but hasn't.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the detail of messages
sent to stdout and stderr.
--version
Display version information.
-y|--yes
Do not prompt for confirmation interactively but always assume the answer yes.
Use with extreme caution. (For automatic no, see -qq.)
See lvm(8) for information about environment variables used by lvm. For example, LVM_VG_NAME can generally be substituted for a required VG parameter.
lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),
pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8),
vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),
lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),
lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),
dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),
lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)
| LVM TOOLS 2.03.16(2) (2022-05-18) | Red Hat, Inc. |