DOKK / manpages / debian 12 / morse-simulator / morse_sync.1.en
MORSE_SYNC(1) MORSE MORSE_SYNC(1)

morse_sync - Tool to synchronize the MORSE simulator

morse_sync [-h] [-d] [-H host] [-P port] [-t timeout] -p <period>

morse_sync is a tool which sends a periodic signal to the Morse simulator, allowing to synchronize it to an external clock. It relies on the socket synchronisation protocol of Morse.

Moreover, morse_sync reads command on its input. It accepts the following commands:

End the morse_sync tool
Change the period of message sent

Enable debug information
Configure the host where Morse is running
Configure the port of the synchronisation socket of Morse
Configure the period (in sec) to which the signal is sent to Morse
Displays information regarding the program use.
Configure time (in sec) during morse_sync tries to connect to the Morse synchronisation socket. It is particularly useful to handle delay in the Morse initialisation. The default value is 10 sec.

morse(1)

Copyright (c) 2009-2010 ONERA Copyright (c) 2009-2016 LAAS-CNRS Copyright (c) 2015-2016 ISAE-SUPAERO Copyright held by the MORSE authors or the institutions employing them, refer to the AUTHORS file for the list. The list of the contributors to each file can be obtained from the commit history ('git log <file>').

February 6, 2023 1.4