mstfwtrace - Extracts and prints trace messages generated by the
firmware of 5th generation devices
usage: mstfwtrace -d|--device DEVICE [options]
- -d DEVICE, --device
DEVICE
- PCI device name
- --tracer_mode
TRACER_MODE
- Tracer mode [MEM]
- --real_ts
- Print real timestamps in [hh:mm:ss:nsec]
- --ignore_old_events
- Ignore collecting old events
- -i IRISC, --irisc
IRISC
- Irisc name [all]
- -s, --stream
- Run in streaming mode
- -m MASK, --mask
MASK
- Trace class mask, use "+" to enable multiple classes or use
integer format, e.g: -m class1+class2+... or 0xff00ff00
- -l LEVEL, --level
LEVEL
- Trace level
Device Specific Info: ====================
- ConnectIB: Trace classes:
- DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB,
PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS,
MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS CMD_DRIVER, PROFILING,
MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH
VIRT
- SwitchIB: Trace classes:
- class1, class2
- ConnectX4: Trace classes:
- DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB,
PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS,
MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS CMD_DRIVER, PROFILING,
MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH
VIRT
- ConnectX5: Trace classes:
- DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB,
PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS,
MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS CMD_DRIVER, PROFILING,
MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH
VIRT
- BlueField: Trace classes:
- DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB,
PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS,
MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS CMD_DRIVER, PROFILING,
MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH
VIRT
- ConnectX6: Trace classes:
- DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB,
PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS,
MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS CMD_DRIVER, PROFILING,
MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH
VIRT
- ConnectX6DX: Trace classes:
- DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB,
PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS,
MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS CMD_DRIVER, PROFILING,
MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH
VIRT
- Spectrum: Trace classes:
- class1, class2
- ConnectX4LX: Trace classes:
- DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB,
PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS,
MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS CMD_DRIVER, PROFILING,
MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH
VIRT
- SwitchIB2: Trace classes:
- class1, class2
- Quantum: Trace classes:
- class1, class2
- Spectrum2: Trace classes:
- class1, class2
The full documentation for mstfwtrace, is maintained as a
Texinfo manual. If the info and mstfwtrace, programs are
properly installed at your site, the command
- info mstfwtrace,
should give you access to the complete manual.