Pbmpage User Manual(1) | General Commands Manual | Pbmpage User Manual(1) |
pbmpage - create a one page test pattern for printing
pbmpage [-a4] test_pattern
This program is part of Netpbm(1).
pbmpage generates a one page test pattern to print on a sheet of paper, for use in calibrating a printer. The test pattern in is PBM format.
pbmpage produces an image intended for 600 dots per inch printer resolution.
If you are printing on an HP PPA printer, you can convert the output of this program to a stream that you can feed to the printer with pbmtoppa.
Bear in mind that when you print the test pattern, you are testing not only the printer, but any converter or driver software along the printing path. Any one of these components may adjust margins, crop the image, erase edges, and such.
If, because of addition of margins, the printer refuses to print the image because it is too big, use pamcut to cut the right and bottom edges off the test pattern until it is small enough to print.
test_pattern is the number of the test pattern to generate, as follows. The default is 1.
Before Netpbm 10.18 (August 2003), the perimeter box was not there.
In addition to the options common to all programs based on
libnetpbm (most notably -quiet, see
Common Options ), pbmpage recognizes the following command line
option:
Tim Norman. Copyright (C) 1998. Licensed under GNU Public License
Manual page by Bryan Henderson, May 2000. Contributed to the public domain by its author.
This manual page was generated by the Netpbm tool 'makeman' from HTML source. The master documentation is at
08 June 2019 | netpbm documentation |