DOKK / manpages / debian 12 / ntpsec / ntptrace.1.en
NTPTRACE(1) NTPsec NTPTRACE(1)

ntptrace - trace peers of an NTP server

ntptrace [-V | --version] [-n |--numeric]

[-m number | --max-hosts=number]
[-r host | --host=remote]
hostname

ntptrace is a python script that uses the ntpq utility program to follow the chain of NTP servers from a given host back to the primary time source.

For ntptrace to work properly, each of these servers must implement the NTP Control and Monitoring Protocol specified in RFC 1305 and enable NTP Mode 6 control packets. Nowadays it is usual for public timeservers to disable Mode 6 queries, so this script is unlikely to be very useful unless you have a collection of specially-configured timeservers on your LAN.

If given no arguments, ntptrace starts with localhost. Here is an example of the output from ntptrace:

% ntptrace
localhost: stratum 4, offset 0.0019529, synch distance 0.144135
server2ozo.com: stratum 2, offset 0.0124263, synch distance 0.115784
usndh.edu: stratum 1, offset 0.0019298, synch distance 0.011993, refid 'GPS'

On each line, the fields are (left to right): the host name, the host stratum, the time offset between that host and the local host (as measured by ntptrace; this is why it is not always zero for "localhost"), the host synchronization distance, and (only for stratum-1 servers) the reference clock ID. All times are given in seconds. Note that the stratum is the server hop count to the primary source, while the synchronization distance is the estimated error relative to the primary source. These terms are precisely defined in RFC 1305.

-n, --numeric

Print IP addresses instead of hostnames.

Output hosts as dotted-quad numeric format rather than converting to the canonical host names.

-m number, --max-hosts=number

Maximum number of peers to trace. This option takes an integer number as its argument. The default number for this option is 99.

-r string, --host=string

Trace a single remote host.

-V, --version

Print the version string and exit.

One of the following exit values will be returned:

0 (EXIT_SUCCESS)

Successful program execution.

1 (EXIT_FAILURE)

The operation failed or the invocation was not valid.
2023-07-29 NTPsec