nut.conf - UPS definitions for Network UPS Tools
This file attempts to standardize the various files being found in
different installations, like /etc/default/nut on Debian based systems and
/etc/sysconfig/ups on RedHat based systems.
Distribution’s init script should source this file in order
to determine which components have to be started.
Blank lines are ignored. Lines with a hash (#) character at
the 1st position of the line are ignored, too. They can be used to add
comments.
This file is intended to be sourced by shell scripts. You MUST NOT
use spaces around the equal sign!
Refer to the EXAMPLE section for illustrations.
MODE
Required. Recognized values are
none,
standalone,
netserver and
netclient. Defaults to
none.
none
Indicates that NUT should not get started automatically,
possibly because it is not configured or that an Integrated Power Management
or some external system, is used to startup the NUT components.
standalone
Addresses a local only configuration, with 1 UPS
protecting the local system. This implies to start the 3 NUT layers (driver,
upsd and upsmon), with the related configuration files. This mode can also
address UPS redundancy.
netserver
Like the standalone configuration, but also possibly need
one or more specific LISTEN directive(s) in upsd.conf. Since this MODE is open
to the network, a special care should be applied to security concerns.
netclient
When only upsmon is required, possibly because there are
other hosts that are more closely attached to the UPS, the MODE should be set
to netclient.
UPSD_OPTIONS
Optional. Set upsd specific options. See
upsd(8)
for more details. It is ignored when
MODE above indicates that no upsd
should be running.
UPSMON_OPTIONS
Optional. Set upsmon specific options. See
upsmon(8) for more details. It is ignored when
MODE above
indicates that no upsmon should be running.
POWEROFF_WAIT
Optional. At the end of an emergency system halt, the
upsmon primary will signal the UPS to switch off. This may fail for a number
of reasons. Most notably is the case that mains power returns during the
shutdown process. See the section "Power races" in
/usr/share/doc/nut/FAQ.txt.gz. The system will wait this long for the UPS to
cut power, and then reboot. It should be long enough to exhaust the batteries,
in case line power continues to be unavailable. On the other hand, it should
not be so long that the system remains offline for an unreasonable amount of
time if line power has returned. See
sleep(1) for compatible time syntax. If
you specify the time in seconds, use the "s" suffix.
Warning
this workaround might be dangerous under some circumstances.
Please read http://bugs.debian.org/358696 for more details.
# /etc/nut/nut.conf. See nut.conf(5)
MODE=none
UPSD_OPTIONS=""
UPSMON_OPTIONS=""
# POWEROFF_WAIT=15m
An init script, such as /etc/init.d/nut, is expected to source
this file in order to determine which components have to be started.