| PROVIDER-ENCODER(7SSL) | OpenSSL | PROVIDER-ENCODER(7SSL) |
provider-encoder - The OSSL_ENCODER library <-> provider functions
#include <openssl/core_dispatch.h>
/*
* None of these are actual functions, but are displayed like this for
* the function signatures for functions that are offered as function
* pointers in OSSL_DISPATCH arrays.
*/
/* Encoder parameter accessor and descriptor */
const OSSL_PARAM *OSSL_FUNC_encoder_gettable_params(void *provctx);
int OSSL_FUNC_encoder_get_params(OSSL_PARAM params[]);
/* Functions to construct / destruct / manipulate the encoder context */
void *OSSL_FUNC_encoder_newctx(void *provctx);
void OSSL_FUNC_encoder_freectx(void *ctx);
int OSSL_FUNC_encoder_set_ctx_params(void *ctx, const OSSL_PARAM params[]);
const OSSL_PARAM *OSSL_FUNC_encoder_settable_ctx_params(void *provctx);
/* Functions to check selection support */
int OSSL_FUNC_encoder_does_selection(void *provctx, int selection);
/* Functions to encode object data */
int OSSL_FUNC_encoder_encode(void *ctx, OSSL_CORE_BIO *out,
const void *obj_raw,
const OSSL_PARAM obj_abstract[],
int selection,
OSSL_PASSPHRASE_CALLBACK *cb,
void *cbarg);
/* Functions to import and free a temporary object to be encoded */
void *OSSL_FUNC_encoder_import_object(void *ctx, int selection,
const OSSL_PARAM params[]);
void OSSL_FUNC_encoder_free_object(void *obj);
We use the wide term "encode" in this manual. This includes but is not limited to serialization.
The ENCODER operation is a generic method to encode a provider-native object (obj_raw) or an object abstraction (object_abstract, see provider-object(7)) into an encoded form, and write the result to the given OSSL_CORE_BIO. If the caller wants to get the encoded stream to memory, it should provide a BIO_s_mem(3) BIO.
The encoder doesn't need to know more about the OSSL_CORE_BIO pointer than being able to pass it to the appropriate BIO upcalls (see "Core functions" in provider-base(7)).
The ENCODER implementation may be part of a chain, where data is passed from one to the next. For example, there may be an implementation to encode an object to DER (that object is assumed to be provider-native and thereby passed via obj_raw), and another one that encodes DER to PEM (that one would receive the DER encoding via obj_abstract).
The encoding using the OSSL_PARAM(3) array form allows a encoder to be used for data that's been exported from another provider, and thereby allow them to exist independently of each other.
The encoding using a provider side object can only be safely used with provider data coming from the same provider, for example keys with the KEYMGMT provider.
All "functions" mentioned here are passed as function pointers between libcrypto and the provider in OSSL_DISPATCH(3) arrays via OSSL_ALGORITHM(3) arrays that are returned by the provider's provider_query_operation() function (see "Provider Functions" in provider-base(7)).
All these "functions" have a corresponding function type definition named OSSL_FUNC_{name}_fn, and a helper function to retrieve the function pointer from an OSSL_DISPATCH(3) element named OSSL_FUNC_{name}. For example, the "function" OSSL_FUNC_encoder_encode() has these:
typedef int
(OSSL_FUNC_encoder_encode_fn)(void *ctx, OSSL_CORE_BIO *out,
const void *obj_raw,
const OSSL_PARAM obj_abstract[],
int selection,
OSSL_PASSPHRASE_CALLBACK *cb, void *cbarg);
static ossl_inline OSSL_FUNC_encoder_encode_fn
OSSL_FUNC_encoder_encode(const OSSL_DISPATCH *opf);
OSSL_DISPATCH(3) arrays are indexed by numbers that are provided as macros in openssl-core_dispatch.h(7), as follows:
OSSL_FUNC_encoder_get_params OSSL_FUNC_ENCODER_GET_PARAMS OSSL_FUNC_encoder_gettable_params OSSL_FUNC_ENCODER_GETTABLE_PARAMS OSSL_FUNC_encoder_newctx OSSL_FUNC_ENCODER_NEWCTX OSSL_FUNC_encoder_freectx OSSL_FUNC_ENCODER_FREECTX OSSL_FUNC_encoder_set_ctx_params OSSL_FUNC_ENCODER_SET_CTX_PARAMS OSSL_FUNC_encoder_settable_ctx_params OSSL_FUNC_ENCODER_SETTABLE_CTX_PARAMS OSSL_FUNC_encoder_does_selection OSSL_FUNC_ENCODER_DOES_SELECTION OSSL_FUNC_encoder_encode OSSL_FUNC_ENCODER_ENCODE OSSL_FUNC_encoder_import_object OSSL_FUNC_ENCODER_IMPORT_OBJECT OSSL_FUNC_encoder_free_object OSSL_FUNC_ENCODER_FREE_OBJECT
The name of an implementation should match the type of object it handles. For example, an implementation that encodes an RSA key should be named "RSA". Likewise, an implementation that further encodes DER should be named "DER".
Properties can be used to further specify details about an implementation:
This property is mandatory.
OpenSSL providers recognize the following output types:
This property is optional.
The possible values of both these properties is open ended. A provider may very well specify output types and structures that libcrypto doesn't know anything about.
Sometimes, an object has more than one subset of data that is interesting to treat separately or together. It's possible to specify what subsets are to be encoded, with a set of bits selection that are passed in an int.
This set of bits depend entirely on what kind of provider-side object is passed. For example, those bits are assumed to be the same as those used with provider-keymgmt(7) (see "Key Objects" in provider-keymgmt(7)) when the object is an asymmetric keypair.
ENCODER implementations are free to regard the selection as a set of hints, but must do so with care. In the end, the output must make sense, and if there's a corresponding decoder, the resulting decoded object must match the original object that was encoded.
OSSL_FUNC_encoder_does_selection() should tell if a particular implementation supports any of the combinations given by selection.
OSSL_FUNC_encoder_newctx() returns a context to be used with the rest of the functions.
OSSL_FUNC_encoder_freectx() frees the given ctx, if it was created by OSSL_FUNC_encoder_newctx().
OSSL_FUNC_encoder_set_ctx_params() sets context data according to parameters from params that it recognises. Unrecognised parameters should be ignored. Passing NULL for params should return true.
OSSL_FUNC_encoder_settable_ctx_params() returns a constant OSSL_PARAM(3) array describing the parameters that OSSL_FUNC_encoder_set_ctx_params() can handle.
See OSSL_PARAM(3) for further details on the parameters structure used by OSSL_FUNC_encoder_set_ctx_params() and OSSL_FUNC_encoder_settable_ctx_params().
A provider-native object may be associated with a foreign provider, and may therefore be unsuitable for direct use with a given ENCODER implementation. Provided that the foreign provider's implementation to handle the object has a function to export that object in OSSL_PARAM(3) array form, the ENCODER implementation should be able to import that array and create a suitable object to be passed to OSSL_FUNC_encoder_encode()'s obj_raw.
OSSL_FUNC_encoder_import_object() should import the subset of params given with selection to create a provider-native object that can be passed as obj_raw to OSSL_FUNC_encoder_encode().
OSSL_FUNC_encoder_free_object() should free the object that was created with OSSL_FUNC_encoder_import_object().
OSSL_FUNC_encoder_encode() should take a provider-native object (in obj_raw) or an object abstraction (in obj_abstract), and should output the object in encoded form to the OSSL_CORE_BIO. The selection bits, if relevant, should determine in greater detail what will be output. The encoding functions also take an OSSL_PASSPHRASE_CALLBACK(3) function pointer along with a pointer to application data cbarg, which should be used when a pass phrase prompt is needed.
Operation parameters currently recognised by built-in encoders are as follows:
If this name is invalid for the encoding implementation, the implementation should refuse to perform the encoding, i.e. OSSL_FUNC_encoder_encode_data() and OSSL_FUNC_encoder_encode_object() should return an error.
The encoding implementation isn't obligated to use this value. However, it is recommended that implementations that do not handle property strings return an error on receiving this parameter unless its value NULL or the empty string.
Parameters currently recognised by the built-in pass phrase callback:
OSSL_FUNC_encoder_newctx() returns a pointer to a context, or NULL on failure.
OSSL_FUNC_encoder_set_ctx_params() returns 1, unless a recognised parameter was invalid or caused an error, for which 0 is returned.
OSSL_FUNC_encoder_settable_ctx_params() returns a pointer to an array of constant OSSL_PARAM(3) elements.
OSSL_FUNC_encoder_does_selection() returns 1 if the encoder implementation supports any of the selection bits, otherwise 0.
OSSL_FUNC_encoder_encode() returns 1 on success, or 0 on failure.
The ENCODER interface was introduced in OpenSSL 3.0.
Copyright 2019-2021 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use this file except in compliance with the License. You can obtain a copy in the file LICENSE in the source distribution or at <https://www.openssl.org/source/license.html>.
| 2023-10-23 | 3.0.11 |