DOKK / manpages / debian 12 / osmo-bsc-ipaccess-utils / ipaccess-config.1.en
IPACCESS-CONFIG(1) IPACCESS-CONFIG(1)

ipaccess-config - Tool to configure an ip.access nanoBTS

ipaccess-config [options] <IP_OF_BTS>

ipaccess-config is a small command line tool to configure an ip.access nanoBTS.

You can use this tool to perform basic operations such as setting NVRAM parameters or performing tests.

It is part of the OpenBSC base station controller from Osmocom.

Commands for writing to the BTS:

Set the Unit ID of the BTS
Set primary OML IP (IP of your BSC)
Set static IP address + netmask of BTS
Set static IP gateway of BTS
Restart the BTS (after other operations)
Set NVRAM attributes
Set one additional NVRAM attribute
Set one additional NVRAM attribute
Perform specified test number
Perform specified test
Set the IPA Stream Identifier for OML
Download firmware into BTS

Miscellaneous commands:

this text
Print parameter details.
Provide firmware information
This will dump the firmware parts to the filesystem. Use with -f.
Loop the tests executed with the --listen command.

ipaccess-find(1)

This manual page was written by Ruben Undheim <ruben.undheim@gmail.com> for the Debian project (and may be used by others).

23 March 2023