DOKK / manpages / debian 12 / pgpool2 / watchdog_setup.1.en
WATCHDOG_SETUP(1) pgpool-II 4.3.5 Documentation WATCHDOG_SETUP(1)

watchdog_setup - Create a temporary installation of Pgpool-II clusters with watchdog

watchdog_setup [option...]

watchdog_setup creates a temporary installation of Pgpool-II clusters with watchdog enabled, which includes a Pgpool-II installation and specified number of PostgreSQL installations under current directory. Current directory must be empty before running watchdog_setup.

watchdog_setup is for testing purpose only and should not be used to create production installations. Also please note that heartbeat is not used.

watchdog_setup uses pgpool_setup(1) as a workhorse.

Currently watchdog_setup supports streaming replication mode, snapshot isolation mode, native replication mode, logical replication mode and raw mode.

watchdog_setup accepts the following command-line arguments:

-wn num_pgpool

Specifies the number of Pgpool-II installations. If this is omitted, 3 is used.

-wp watchdog_base_port

Specify the starting base port number used by Pgpool-II and PostgreSQL. For the first Pgpool-II, Pgpool-II port is watchdog_base_port. pcp port is watchdog_base_port + 1, watchdog port is watchdog_base_port + 2. wd_heartbeat_port is watchdog_base_port + 3 (though heartbeat is not used). The first PostgreSQL node's port is watchdog_base_port + 4, second PostgreSQL node's port is watchdog_base_port + 5 and so on.

If this is omitted, 50000 is used.

-m mode

Specifies the running mode. mode can be r (native replication mode), i (snapshot isolation mode), s (streaming replication mode), l (logical replication mode) or n (raw mode). If this is omitted, s is used.

-n num_clusters

Specifies the number of PostgreSQL installations. If this is omitted, 2 is used.

--no-stop

Do not stop pgpool and PostgreSQL after the work.

-d

Start pgpool with debug mode.

watchdog_setup recognizes following environment variables:

PGPOOL_SETUP

Specifies the path to pgpool_setup command. The default is "pgpool_setup", thus it is assumed that pgpool_setup is in the command search path.

PGPOOL_INSTALL_DIR

Specifies the Pgpool-II installation directory. Pgpool-II binaries is expected to be placed under PGPOOL_INSTALL_DIR/bin and pgpool.conf and pool_hba.conf etc. are expected to be placed under PGPOOL_INSTALL_DIR/etc. The default is /usr/local.

PGPOOLDIR

Specifies the path to Pgpool-II configuration files. The default is PGPOOL_INSTALL_DIR/etc.

PGBIN

Specifies the path to PostgreSQL commands such as initdb, pg_ctl and psql. The default is /usr/local/pgsql/bin.

PGLIB

Specifies the path to PostgreSQL shared libraries. The default is /usr/local/pgsql/lib.

PGSOCKET_DIR

Specifies the path to Unix socket directory. The default is /tmp.

INITDBARG

Specifies the arguments for initdb command. The default is "--no-locale -E UTF_8".



    $ watchdog_setup


    Starting set up


    ============= setting up pgpool 0 =============


    Starting set up in streaming replication mode


    creating startall and shutdownall


    creating failover script


    creating database cluster /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool0/data0...done.


    update postgresql.conf


    creating pgpool_remote_start


    creating basebackup.sh


    creating recovery.conf


    creating database cluster /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool0/data1...done.


    update postgresql.conf


    creating pgpool_remote_start


    creating basebackup.sh


    creating recovery.conf


    temporarily start data0 cluster to create extensions


    temporarily start pgpool-II to create standby nodes


    INFO:  unrecognized configuration parameter "debug_level"


    node_id | hostname | port  | status | lb_weight |  role   | select_cnt | load_balance_node | replication_delay


    ---------+----------+-------+--------+-----------+---------+------------+-------------------+-------------------


    0       | /tmp     | 51000 | up     | 0.500000  | primary | 0          | true              | 0


    1       | /tmp     | 51001 | down   | 0.500000  | standby | 0          | false             | 0


    (2 rows)


    recovery node 1...pcp_recovery_node -- Command Successful


    done.


    creating follow primary script


    Pager usage is off.


    node_id | hostname | port  | status | lb_weight |  role   | select_cnt | load_balance_node | replication_delay


    ---------+----------+-------+--------+-----------+---------+------------+-------------------+-------------------


    0       | /tmp     | 51000 | up     | 0.500000  | primary | 0          | false             | 0


    1       | /tmp     | 51001 | up     | 0.500000  | standby | 0          | true              | 0


    (2 rows)


    shutdown all


    pgpool-II setting for streaming replication mode is done.


    To start the whole system, use /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool0/startall.


    To shutdown the whole system, use /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool0/shutdownall.


    pcp command user name is "t-ishii", password is "t-ishii".


    Each PostgreSQL, pgpool-II and pcp port is as follows:


    #1 port is 51000


    #2 port is 51001


    pgpool port is 50000


    pcp port is 50001


    The info above is in README.port.


    ============= setting up pgpool 1 =============


    Starting set up in streaming replication mode


    creating startall and shutdownall


    creating failover script


    creating database cluster /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool1/data0...done.


    update postgresql.conf


    creating pgpool_remote_start


    creating basebackup.sh


    creating recovery.conf


    creating database cluster /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool1/data1...done.


    update postgresql.conf


    creating pgpool_remote_start


    creating basebackup.sh


    creating recovery.conf


    temporarily start data0 cluster to create extensions


    temporarily start pgpool-II to create standby nodes


    INFO:  unrecognized configuration parameter "debug_level"


    node_id | hostname | port  | status | lb_weight |  role   | select_cnt | load_balance_node | replication_delay


    ---------+----------+-------+--------+-----------+---------+------------+-------------------+-------------------


    0       | /tmp     | 51000 | up     | 0.500000  | primary | 0          | true              | 0


    1       | /tmp     | 51001 | down   | 0.500000  | standby | 0          | false             | 0


    (2 rows)


    recovery node 1...pcp_recovery_node -- Command Successful


    done.


    creating follow primary script


    Pager usage is off.


    node_id | hostname | port  | status | lb_weight |  role   | select_cnt | load_balance_node | replication_delay


    ---------+----------+-------+--------+-----------+---------+------------+-------------------+-------------------


    0       | /tmp     | 51000 | up     | 0.500000  | primary | 0          | true              | 0


    1       | /tmp     | 51001 | up     | 0.500000  | standby | 0          | false             | 0


    (2 rows)


    shutdown all


    pgpool-II setting for streaming replication mode is done.


    To start the whole system, use /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool1/startall.


    To shutdown the whole system, use /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool1/shutdownall.


    pcp command user name is "t-ishii", password is "t-ishii".


    Each PostgreSQL, pgpool-II and pcp port is as follows:


    #1 port is 51000


    #2 port is 51001


    pgpool port is 50004


    pcp port is 50005


    The info above is in README.port.


    ============= setting up pgpool 2 =============


    Starting set up in streaming replication mode


    creating startall and shutdownall


    creating failover script


    creating database cluster /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool2/data0...done.


    update postgresql.conf


    creating pgpool_remote_start


    creating basebackup.sh


    creating recovery.conf


    creating database cluster /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool2/data1...done.


    update postgresql.conf


    creating pgpool_remote_start


    creating basebackup.sh


    creating recovery.conf


    temporarily start data0 cluster to create extensions


    temporarily start pgpool-II to create standby nodes


    INFO:  unrecognized configuration parameter "debug_level"


    node_id | hostname | port  | status | lb_weight |  role   | select_cnt | load_balance_node | replication_delay


    ---------+----------+-------+--------+-----------+---------+------------+-------------------+-------------------


    0       | /tmp     | 51000 | up     | 0.500000  | primary | 0          | true              | 0


    1       | /tmp     | 51001 | down   | 0.500000  | standby | 0          | false             | 0


    (2 rows)


    recovery node 1...pcp_recovery_node -- Command Successful


    done.


    creating follow primary script


    Pager usage is off.


    node_id | hostname | port  | status | lb_weight |  role   | select_cnt | load_balance_node | replication_delay


    ---------+----------+-------+--------+-----------+---------+------------+-------------------+-------------------


    0       | /tmp     | 51000 | up     | 0.500000  | primary | 0          | true              | 0


    1       | /tmp     | 51001 | up     | 0.500000  | standby | 0          | false             | 0


    (2 rows)


    shutdown all


    pgpool-II setting for streaming replication mode is done.


    To start the whole system, use /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool2/startall.


    To shutdown the whole system, use /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool2/shutdownall.


    pcp command user name is "t-ishii", password is "t-ishii".


    Each PostgreSQL, pgpool-II and pcp port is as follows:


    #1 port is 51000


    #2 port is 51001


    pgpool port is 50008


    pcp port is 50009


    The info above is in README.port.


    $ ls


    pgpool0  pgpool1  pgpool2  shutdownall	startall


    $ sh startall


    waiting for server to start....16123 2016-08-18 16:26:53 JST LOG:  redirecting log output to logging collector process


    16123 2016-08-18 16:26:53 JST HINT:  Future log output will appear in directory "pg_log".


    done


    server started


    waiting for server to start....16136 2016-08-18 16:26:54 JST LOG:  redirecting log output to logging collector process


    16136 2016-08-18 16:26:54 JST HINT:  Future log output will appear in directory "pg_log".


    done


    server started


    t-ishii@localhost: psql -p 50000 test


    Pager usage is off.


    psql (9.5.4)


    Type "help" for help.


    test=# \q


    $ pcp_watchdog_info -p 50001 -v


    Password:


    Watchdog Cluster Information


    Total Nodes              : 3


    Remote Nodes             : 2
	Member Remote Nodes      : 2
	Nodes required for quorum: 2


    Quorum state             : QUORUM EXIST


    Alive Remote Nodes       : 2


    VIP up on local node     : NO


    Leader Node Name         : Linux_tishii-CF-SX3HE4BP_50004


    Leader Host Name         : localhost


    Watchdog Node Information


    Node Name         : Linux_tishii-CF-SX3HE4BP_50000


    Host Name         : localhost


    Delegate IP       : Not_Set


    Pgpool port       : 50000


    Watchdog port     : 50002


    Node priority     : 1


    Status            : 7


    Status Name       : STANDBY
	Membership Status : MEMBER


    Node Name         : Linux_tishii-CF-SX3HE4BP_50004


    Host Name         : localhost


    Delegate IP       : Not_Set


    Pgpool port       : 50004


    Watchdog port     : 50006


    Node priority     : 1


    Status            : 4


    Status Name       : LEADER
	Membership Status : MEMBER


    Node Name         : Linux_tishii-CF-SX3HE4BP_50008


    Host Name         : localhost


    Delegate IP       : Not_Set


    Pgpool port       : 50008


    Watchdog port     : 50010


    Node priority     : 1


    Status            : 7


    Status Name       : STANDBY
	Membership Status : MEMBER

2023 pgpool-II 4.3.5