proj - Cartographic projection filter
proj [
-beEfiIlmorsStTvVwW] [args]]
[
+opt[=arg] ...] file ...
invproj [-beEfiIlmorsStTvVwW] [args]]
[+opt[=arg] ...] file ...
proj and invproj perform respective forward and
inverse conversion of cartographic data to or from cartesian data with a
wide range of selectable projection functions.
invproj may not be available on all platforms; in this case
use proj -I instead.
The following control parameters can appear in any order
- -b
- Special option for binary coordinate data input and output through
standard input and standard output. Data is assumed to be in system type
double floating point words. This option is to be used when proj is
a child process and allows bypassing formatting operations.
New in version 5.2.0: Specify the number of decimals to round to
in the output.
- -i
- Selects binary input only (see -b).
- -I
- Alternate method to specify inverse projection. Redundant when used with
invproj.
- -o
- Selects binary output only (see -b).
- -t<a>
- Where a specifies a character employed as the first character to
denote a control line to be passed through without processing. This option
applicable to ASCII input only. (# is the default value).
- -e <string>
- Where string is an arbitrary string to be output if an error is
detected during data transformations. The default value is a three
character string: *\t*. Note that if the -b, -i or
-o options are employed, an error is returned as HUGE_VAL value for
both return values.
- -E
- Causes the input coordinates to be copied to the output line prior to
printing the converted values.
- -l<[=id]>
- List projection identifiers that can be selected with +proj.
proj -l=id gives expanded description of projection id, e.g.
proj -l=merc.
- -lp
- List of all projection id that can be used with the +proj
parameter. Equivalent to proj -l.
- -lP
- Expanded description of all projections that can be used with the
+proj parameter.
- -le
- List of all ellipsoids that can be selected with the +ellps
parameters.
- -lu
- List of all distance units that can be selected with the +units
parameter.
- -r
- This options reverses the order of the expected input from
longitude-latitude or x-y to latitude-longitude or y-x.
- -s
- This options reverses the order of the output from x-y or
longitude-latitude to y-x or latitude-longitude.
- -S
- Causes estimation of meridional and parallel scale factors, area scale
factor and angular distortion, and maximum and minimum scale factors to be
listed between <> for each input point. For conformal projections
meridional and parallel scales factors will be equal and angular
distortion zero. Equal area projections will have an area factor of
1.
- -m <mult>
- The cartesian data may be scaled by the mult parameter. When
processing data in a forward projection mode the cartesian output values
are multiplied by mult otherwise the input cartesian values are
divided by mult before inverse projection. If the first two
characters of mult are 1/ or 1: then the reciprocal value of
mult is employed.
- -f <format>
- Where format is a printf format string to control the form of the
output values. For inverse projections, the output will be in degrees when
this option is employed. The default format is "%.2f" for
forward projection and DMS for inverse.
- -w<n>
- Where n is the number of significant fractional digits to employ
for seconds output (when the option is not specified, -w3 is
assumed).
- -W<n>
- Where n is the number of significant fractional digits to employ
for seconds output. When -W is employed the fields will be constant
width with leading zeroes.
- -v
- Causes a listing of cartographic control parameters tested for and used by
the program to be printed prior to input data.
- -V
- This option causes an expanded annotated listing of the characteristics of
the projected point. -v is implied with this option.
The +opt run-line arguments are associated with
cartographic parameters. Additional projection control parameters may be
contained in two auxiliary control files: the first is optionally referenced
with the +init=file:id and the second is always processed after the
name of the projection has been established from either the run-line or the
contents of +init file. The environment parameter PROJ_DATA
establishes the default directory for a file reference without an absolute
path. This is also used for supporting files like datum shift files.
One or more files (processed in left to right order) specify the
source of data to be converted. A - will specify the location of
processing standard input. If no files are specified, the input is assumed
to be from stdin. For ASCII input data the two data values must be in the
first two white space separated fields and when both input and output are
ASCII all trailing portions of the input line are appended to the output
line.
Input geographic data (longitude and latitude) must be in DMS or
decimal degrees format and input cartesian data must be in units consistent
with the ellipsoid major axis or sphere radius units. Output geographic
coordinates will be in DMS (if the -w switch is not employed) and
precise to 0.001" with trailing, zero-valued minute-second fields
deleted.
The following script
proj +proj=utm +lon_0=112w +ellps=clrk66 -r <<EOF
45d15'33.1" 111.5W
45d15.551666667N -111d30
+45.25919444444 111d30'000w
EOF
will perform UTM forward projection with a standard UTM central
meridian nearest longitude 112W. The geographic values of this example are
equivalent and meant as examples of various forms of DMS input. The x-y
output data will appear as three lines of:
The proj program is limited to converting between
geographic and projected coordinates within one datum.
The cs2cs program operates similarly, but allows
translation between any pair of definable coordinate reference systems,
including support for datum translation.
A list of known bugs can be found at
https://github.com/OSGeo/PROJ/issues where new bug reports can be
submitted to.