smbios-battery-ctl - src/bin/smbios-battery-ctl
- --version
- show program's version number and exit
- -h, --help
- show this help message and exit
- -v, --verbose
- Display more verbose output.
- -q, --quiet
- Minimize program output. Only errors and warnings are displayed.
- --trace
- Enable verbose function tracing.
- --logconfig=LOGCONFIG
- Specify alternate config log.
- --security-key=SECURITY_KEY
- BIOS pre-calculated security key.
- --password=PASSWORD
- BIOS Setup password for set/activate operations.
- -r,
--rawpassword
- Do not auto-convert password to scancodes.
- --memory-dat=MEMORY_DAT
- Path to a memory dump file to use instead of real RAM
- --cmos-dat=CMOS_DAT
- Path to a CMOS dump file to use instead of real CMOS
- -c,
--battery-charge
- This will get the Current Battery Charging State
- --get-charging-cfg
- Get the current Primary Battery Charge Configuration
- --set-charging-mode=<MODE>
- Set the current Primary Battery Charge Configuration. Valid choices are:
['primarily_ac', 'adaptive', 'custom', 'standard', 'express']
- --set-custom-charge-interval=<START>
<END>
- Set the percentage bounds for custom charge. Both must be integers. START
must lie in the range [50, 95], END must lie in the range [55, 100], END
must be at least (START + 5)
The full documentation for smbios-battery-ctl is maintained
as a Texinfo manual. If the info and smbios-battery-ctl
programs are properly installed at your site, the command
- info smbios-battery-ctl
should give you access to the complete manual.