ModuleParrot.conf - Configuration file for the SvxLink server
Parrot module
svxlink is a general purpose voice service system for ham
radio use. This man-page describe the SvxLink server configuration for the
Parrot module.
The Parrot module record audio as long as the squelch is open and
then plays it back. This can be used as a simplex repeater or for tests. It
also plays back (spelling the digits) the DTMF digits it receives.
There are a couple of configuration variables that are common to
all modules. The documentation for these can be found in the
svxlink.conf(5) manual page.
Here is the description of all module specific configuration
variables that the SvxLink Parrot module understands.
- FIFO_LEN
- The length, in seconds, of the FIFO (First In First Out) audio buffer
where audio is recorded to. When the squelch has been opened for longer
than the time specified here, the oldest audio in the buffer will be
thrown away.
- REPEAT_DELAY
- Specify a time, in milliseconds, that the parrot module will wait after
squelch close before playing back the recorded message. This is mostly a
way to prevent the parrot module to start sending if the squlech
momentarily closes on weak signals.
- /etc/svxlink/svxlink.conf (or deprecated
/etc/svxlink.conf)
- The system wide configuration file.
- ~/.svxlink/svxlink.conf
- Per user configuration file.
- /etc/svxlink/svxlink.d/ModuleParrot.conf
- Global modularized configuration file. Depends on the CFG_DIR
configuration variable setting.
- ~/.svxlink/svxlink.d/ModuleParrot.conf
- Per user modularized configuration file. Depends on the CFG_DIR
configuration variable setting.
Tobias Blomberg (SM0SVX) <sm0svx at users dot sourceforge dot
net>