| TLMGR(1) | User Contributed Perl Documentation | TLMGR(1) |
tlmgr - the native TeX Live Manager
tlmgr [option...] action [option...] [operand...]
tlmgr manages an existing TeX Live installation, both packages and configuration options. For information on initially downloading and installing TeX Live, see <https://tug.org/texlive/acquire.html>.
The most up-to-date version of this documentation (updated nightly from the development sources) is available at <https://tug.org/texlive/tlmgr.html>, along with procedures for updating "tlmgr" itself and information about test versions.
WARNING: tlmgr in Debian runs always in user mode
TeX Live is organized into a few top-level schemes, each of which is specified as a different set of collections and packages, where a collection is a set of packages, and a package is what contains actual files. Schemes typically contain a mix of collections and packages, but each package is included in exactly one collection, no more and no less. A TeX Live installation can be customized and managed at any level.
See <https://tug.org/texlive/doc> for all the TeX Live documentation available.
After successfully installing TeX Live, here are a few common operations with "tlmgr":
Caveat: "mirror.ctan.org" resolves to many different hosts, and they are not perfectly synchronized; we recommend updating only daily (at most), and not more often. You can choose a particular mirror if problems; the list of all CTAN mirrors with the status of each is at <https://ctan.org/mirrors/mirmon>.
For all the capabilities and details of "tlmgr", please read the following voluminous information.
The following options to "tlmgr" are global options, not specific to any action. All options, whether global or action-specific, can be given anywhere on the command line, and in any order. The first non-option argument will be the main action. In all cases, "--"option and "-"option are equivalent, and an "=" is optional between an option name and its value.
This "--repository" option changes the location only for the current run; to make a permanent change, use "option repository" (see the "option" action).
As an example, you can choose a particular CTAN mirror with something like this:
-repository http://ctan.example.org/its/ctan/dir/systems/texlive/tlnet
Of course a real hostname and its particular top-level CTAN directory have to be specified. The list of CTAN mirrors is available at <https://ctan.org/mirrors/mirmon>.
Here's an example of using a local directory:
-repository /local/TL/repository
For backward compatibility and convenience, "--location" and "--repo" are accepted as aliases for this option.
Locations can be specified as any of the following:
If the repository is on the network, trailing "/" characters and/or trailing "/tlpkg" and/or "/archive" components are ignored.
"tlmgr" itself has a graphical interface as well as the command line interface. You can give the option to invoke it, "--gui", together with an action to be brought directly into the respective screen of the GUI. For example, running
tlmgr --gui update
starts you directly at the update screen. If no action is given, the GUI will be started at the main screen. See "GUI FOR TLMGR".
However, the native GUI requires Perl/TK, which is no longer included in TeX Live's Perl distribution for Windows. You may find "tlshell" or "tlcockpit" easier to work with.
tlshell shares its message catalog with tlmgr.
If this is not possible, "tlmgr" will fall back to using "wget". To disable these persistent connections, use "--no-persistent-downloads".
The standard options for TeX Live programs are also accepted: "--help/-h/-?", "--version", "-q" (no informational messages), "-v" (debugging messages, can be repeated). For the details about these, see the "TeXLive::TLUtils" documentation.
The "--version" option shows version information about the TeX Live release and about the "tlmgr" script itself. If "-v" is also given, revision number for the loaded TeX Live Perl modules are shown, too.
Display this help information and exit (same as "--help", and on the web at <https://tug.org/texlive/doc/tlmgr.html>). Sometimes the "perldoc" and/or "PAGER" programs on the system have problems, resulting in control characters being literally output. This can't always be detected, but you can set the "NOPERLDOC" environment variable and "perldoc" will not be used.
Gives version information (same as "--version").
If "-v" has been given the revisions of the used modules are reported, too.
If the "--clean" option is specified, backups are pruned (removed) instead of saved. The optional integer value N may be specified to set the number of backups that will be retained when cleaning. If "N" is not given, the value of the "autobackup" option is used. If both are missing, an error is issued. For more details of backup pruning, see the "option" action.
Options:
Shows the available candidate repositories for package pkg. See "MULTIPLE REPOSITORIES" below.
Execute one (or all) check(s) of the consistency of the installation. If no problems are found, there will be no output. (To get a view of what is being done, run "tlmgr -v check".)
If you call "tlmgr check collections" this test will be carried out instead since former versions for "tlmgr" called it that way.
Options:
With one of "conf texmf", "conf tlmgr", or "conf updmap", shows all key/value pairs (i.e., all settings) as saved in "ROOT/texmf.cnf", the user-specific "tlmgr" configuration file (see below), or the first found (via "kpsewhich") "updmap.cfg" file, respectively.
If key is given in addition, shows the value of only that key in the respective file. If option --delete is also given, the value in the given configuration file is entirely removed (not just commented out).
If value is given in addition, key is set to value in the respective file. No error checking is done!
The "PATH" value shown by "conf" is as used by "tlmgr". The directory in which the "tlmgr" executable is found is automatically prepended to the PATH value inherited from the environment.
Here is a practical example of changing configuration values. If the execution of (some or all) system commands via "\write18" was left enabled during installation, you can disable it afterwards:
tlmgr conf texmf shell_escape 0
The subcommand "auxtrees" allows adding and removing arbitrary additional texmf trees, completely under user control. "auxtrees show" shows the list of additional trees, "auxtrees add" tree adds a tree to the list, and "auxtrees remove" tree removes a tree from the list (if present). The trees should not contain an "ls-R" file (or files will not be found if the "ls-R" becomes stale). This works by manipulating the Kpathsea variable "TEXMFAUXTREES", in (by default) "ROOT/texmf.cnf". Example:
tlmgr conf auxtrees add /quick/test/tree
tlmgr conf auxtrees remove /quick/test/tree
In all cases the configuration file can be explicitly specified via the option "--conffile" file, e.g., if you don't want to change the system-wide configuration.
Warning: The general facility for changing configuration values is here, but tinkering with settings in this way is strongly discouraged. Again, no error checking on either keys or values is done, so any sort of breakage is possible.
Dump complete local or remote TLPDB to standard output, as-is. The output is analogous to the "--machine-readable" output; see "MACHINE-READABLE OUTPUT" section.
Options:
Exactly one of "--local" and "--remote" must be given.
In either case, the first line of the output specifies the repository location, in this format:
"location-url" "\t" location
where "location-url" is the literal field name, followed by a tab, and location is the file or url to the repository.
Line endings may be either LF or CRLF depending on the current platform.
The "generate" action overwrites any manual changes made in the respective files: it recreates them from scratch based on the information of the installed packages, plus local adaptions. The TeX Live installer and "tlmgr" routinely call "generate" for all of these files.
For managing your own fonts, please read the "updmap --help" information and/or <https://tug.org/fonts/fontinstall.html>.
For managing your own formats, please read the "fmtutil --help" information.
In more detail: "generate" remakes any of the configuration files "language.dat", "language.def", and "language.dat.lua" from the information present in the local TLPDB, plus locally-maintained files.
The locally-maintained files are "language-local.dat", "language-local.def", or "language-local.dat.lua", searched for in "TEXMFLOCAL" in the respective directories. If local additions are present, the final file is made by starting with the main file, omitting any entries that the local file specifies to be disabled, and finally appending the local file.
(Historical note: The formerly supported "updmap-local.cfg" and "fmtutil-local.cnf" are no longer read, since "updmap" and "fmtutil" now reads and supports multiple configuration files. Thus, local additions can and should be put into an "updmap.cfg" of "fmtutil.cnf" file in "TEXMFLOCAL". The "generate updmap" and "generate fmtutil" actions no longer exist.)
Local files specify entries to be disabled with a comment line, namely one of these:
%!NAME --!NAME
where "language.dat" and "language.def" use "%", and "language.dat.lua" use "--". In all cases, the name is the respective format name or hyphenation pattern identifier. Examples:
%!german --!usenglishmax
(Of course, you're not likely to actually want to disable those particular items. They're just examples.)
After such a disabling line, the local file can include another entry for the same item, if a different definition is desired. In general, except for the special disabling lines, the local files follow the same syntax as the master files.
The form "generate language" recreates all three files "language.dat", "language.def", and "language.dat.lua", while the forms with an extension recreates only that given language file.
Options:
These subsequent calls cause the newly-generated files to actually take effect. This is not done by default since those calls are lengthy processes and one might want to made several related changes in succession before invoking these programs.
The respective locations are as follows:
tex/generic/config/language.dat (and language-local.dat) tex/generic/config/language.def (and language-local.def) tex/generic/config/language.dat.lua (and language-local.dat.lua)
Start the graphical user interface. See GUI below.
With the single word "collections" or "schemes" as the argument, lists the request type instead of all packages.
With any other arguments, display information about pkg: the name, category, short and long description, sizes, installation status, and TeX Live revision number. If pkg is not locally installed, searches in the remote installation source.
For normal packages (not collections or schemes), the sizes of the four groups of files (run/src/doc/bin files) are shown separately. For collections, the cumulative size is shown, including all directly-dependent packages (but not dependent collections). For schemes, the cumulative size is also shown, including all directly-dependent collections and packages.
If pkg is not found locally or remotely, the search action is used and lists matching packages and files.
It also displays information taken from the TeX Catalogue, namely the package version, date, and license. Consider these, especially the package version, as approximations only, due to timing skew of the updates of the different pieces. By contrast, the "revision" value comes directly from TL and is reliable.
The former actions "show" and "list" are merged into this action, but are still supported for backward compatibility.
Options:
The "cat-*" fields all come from the TeX Catalogue (<https://ctan.org/pkg/catalogue>). For each, there are two more variants with prefix "l" and "r", e.g., "lcat-version" and "rcat-version", which indicate the local and remote information, respectively. The variants without "l" and "r" show the most current one, which is normally the remote value.
The requested packages' information is listed in CSV format, one package per line, and the column information is given by the "itemN". The "depends" column contains the names of all the dependencies separated by ":" characters.
At this writing, the "cat-contact-*" fields include: "home", "repository", "support", "bugs", "announce", "development". Each may be empty or a url value. A brief description is on the CTAN upload page for new packages: <https://ctan.org/upload>.
Sets up a texmf tree for so-called user mode management, either the default user tree ("TEXMFHOME"), or one specified on the command line with "--usertree". See "USER MODE" below.
Install each pkg given on the command line, if it is not already installed. It does not touch existing packages; see the "update" action for how to get the latest version of a package.
By default this also installs all packages on which the given pkgs are dependent. Options:
When re-installing, only dependencies on normal packages are followed (i.e., not those of category Scheme or Collection).
tlmgr install --reinstall --with-doc --with-src fontspec
This action does not automatically add new symlinks in system directories; you need to run "tlmgr path add" ("path") yourself if you are using this feature and want new symlinks added.
With the "list" argument, "key" lists all keys.
The "add" argument requires another argument, either a filename or "-" for stdin, from which the key is added. The key is added to the local keyring "GNUPGHOME/repository-keys.gpg", which is normally "tlpkg/gpg/repository-keys.gpg".
The "remove" argument requires a key id and removes the requested id from the local keyring.
Synonym for "info".
The first form, "show", shows the global TeX Live settings currently saved in the TLPDB with a short description and the "key" used for changing it in parentheses.
The second form, "showall", is similar, but also shows options which can be defined but are not currently set to any value ("help" is a synonym).
Both "show..." forms take an option "--json", which dumps the option information in JSON format. In this case, both forms dump the same data. For the format of the JSON output see "tlpkg/doc/JSON-formats.txt", format definition "TLOPTION".
In the third form, with key, if value is not given, the setting for key is displayed. If value is present, key is set to value.
Possible values for key are (run "tlmgr option showall" for the definitive list):
repository (default package repository), formats (generate formats at installation or update time), postcode (run postinst code blobs) docfiles (install documentation files), srcfiles (install source files), backupdir (default directory for backups), autobackup (number of backups to keep). sys_bin (directory to which executables are linked by the path action) sys_man (directory to which man pages are linked by the path action) sys_info (directory to which Info files are linked by the path action) desktop_integration (Windows-only: create Start menu shortcuts) fileassocs (Windows-only: change file associations) multiuser (Windows-only: install for all users)
One common use of "option" is to permanently change the installation to get further updates from the Internet, after originally installing from DVD. To do this, you can run
tlmgr option repository https://mirror.ctan.org/systems/texlive/tlnet
The "install-tl" documentation has more information about the possible values for "repository". (For backward compatibility, "location" can be used as a synonym for "repository".)
If "formats" is set (this is the default), then formats are regenerated when either the engine or the format files have changed. Disable this only when you know how and want to regenerate formats yourself whenever needed (which is often, in practice).
The "postcode" option controls execution of per-package postinstallation action code. It is set by default, and again disabling is not likely to be of interest except to developers doing debugging.
The "docfiles" and "srcfiles" options control the installation of their respective file groups (documentation, sources; grouping is approximate) per package. By default both are enabled (1). Either or both can be disabled (set to 0) if disk space is limited or for minimal testing installations, etc. When disabled, the respective files are not downloaded at all.
The options "autobackup" and "backupdir" determine the defaults for the actions "update", "backup" and "restore". These three actions need a directory in which to read or write the backups. If "--backupdir" is not specified on the command line, the "backupdir" option value is used (if set). The TL installer sets "backupdir" to ".../tlpkg/backups", under the TL root installation directory.
The "autobackup" option (de)activates automatic generation of backups. Its value is an integer. If the "autobackup" value is "-1", no backups are removed. If "autobackup" is 0 or more, it specifies the number of backups to keep. Thus, backups are disabled if the value is 0. In the "--clean" mode of the "backup" action this option also specifies the number to be kept. The default value is 1, so that backups are made, but only one backup is kept.
To setup "autobackup" to "-1" on the command line, use:
tlmgr option -- autobackup -1
The "--" avoids having the "-1" treated as an option. (The "--" stops parsing for options at the point where it appears; this is a general feature across most Unix programs.)
The "sys_bin", "sys_man", and "sys_info" options are used on Unix systems to control the generation of links for executables, Info files and man pages. See the "path" action for details.
The last three options affect behavior on Windows installations. If "desktop_integration" is set, then some packages will install items in a sub-folder of the Start menu for "tlmgr gui", documentation, etc. If "fileassocs" is set, Windows file associations are made (see also the "postaction" action). Finally, if "multiuser" is set, then adaptions to the registry and the menus are done for all users on the system instead of only the current user. All three options are on by default.
With no arguments ("tlmgr paper"), shows the default paper size setting for all known programs.
With one argument (e.g., "tlmgr paper a4"), sets the default for all known programs to that paper size.
With a program given as the first argument and no paper size specified (e.g., "tlmgr dvips paper"), shows the default paper size for that program.
With a program given as the first argument and a paper size as the last argument (e.g., "tlmgr dvips paper a4"), set the default for that program to that paper size.
With a program given as the first argument and "--list" given as the last argument (e.g., "tlmgr dvips paper --list"), shows all valid paper sizes for that program. The first size shown is the default.
If "--json" is specified without other options, the paper setup is dumped in JSON format. For the format of JSON output see "tlpkg/doc/JSON-formats.txt", format definition "TLPAPER".
Incidentally, this syntax of having a specific program name before the "paper" keyword is unusual. It is inherited from the longstanding "texconfig" script, which supports other configuration settings for some programs, notably "dvips". "tlmgr" does not support those extra settings.
On Windows, the registry part where the binary directory is added or removed is determined in the following way:
If the user has admin rights, and the option "--w32mode" is not given, the setting w32_multi_user determines the location (i.e., if it is on then the system path, otherwise the user path is changed).
If the user has admin rights, and the option "--w32mode" is given, this option determines the path to be adjusted.
If the user does not have admin rights, and the option "--w32mode" is not given, and the setting w32_multi_user is off, the user path is changed, while if the setting w32_multi_user is on, a warning is issued that the caller does not have enough privileges.
If the user does not have admin rights, and the option "--w32mode" is given, it must be "user" and the user path will be adjusted. If a user without admin rights uses the option "--w32mode admin" a warning is issued that the caller does not have enough privileges.
The "pinning" action manages the pinning file, see "Pinning" below.
"platform add" platform... adds the executables for each given platform platform to the installation from the repository.
"platform remove" platform... removes the executables for each given platform platform from the installation, but keeps the currently running platform in any case.
"platform set" platform switches TeX Live to always use the given platform instead of auto detection.
"platform set auto" switches TeX Live to auto detection mode for platform.
Platform detection is needed to select the proper "xz" and "wget" binaries that are shipped with TeX Live.
"arch" is a synonym for "platform".
Options:
Options:
Print the TeX Live identifier for the detected platform (hardware/operating system) combination to standard output, and exit. "--print-arch" is a synonym.
Print the TeX Live platform identifier, TL platform long name, and original output from guess.
Remove each pkg specified. Removing a collection removes all package dependencies (unless "--no-depends" is specified), but not any collection dependencies of that collection. However, when removing a package, dependencies are never removed. Options:
The "restore" action explains how to restore from a backup.
A package that has been removed using the "--force" option because it is still listed in an installed collection or scheme will not be updated, and will be mentioned as "forcibly removed" in the output of "tlmgr update --list".
Except with "--all", this "remove" action does not automatically remove symlinks to executables from system directories; you need to run "tlmgr path remove" ("path") yourself if you remove an individual package with a symlink in a system directory.
The first form, "repository list", lists all configured repositories and the respective tags if set. If a path, url, or tag is given after the "list" keyword, it is interpreted as the source from which to initialize a TL database and lists the contained packages. This can also be an otherwise-unused repository, either local or remote. If the option "--with-platforms" is specified in addition, for each package the available platforms (if any) are also listed.
The form "repository add" adds a repository (optionally attaching a tag) to the list of repositories, while "repository remove" removes a repository, either by full path/url, or by tag.
The form "repository set" sets the list of available repositories to the items given on the command line, overwriting previous settings.
The form "repository status" reports the verification status of the loaded repositories with the format of one repository per line with fields separated by a single space:
= iff machine-readable output is specified, the verification code (a number);
= a textual description of the verification status, as the last field extending to the end of line.
That is, in normal (not machine-readable) output, the third field (numeric verification status) is not present.
In all cases, one of the repositories must be tagged as "main"; otherwise, all operations will fail!
If "--all" is given, try to restore the latest revision of all package backups found in the backup directory.
Otherwise, if neither pkg nor rev are given, list the available backup revisions for all packages. With pkg given but no rev, list all available backup revisions of pkg.
When listing available packages, "tlmgr" shows the revision, and in parenthesis the creation time if available (in format yyyy-mm-dd hh:mm).
If (and only if) both pkg and a valid revision number rev are specified, try to restore the package from the specified backup.
Options:
Options:
Starts an interactive mode, where tlmgr prompts for commands. This can be used directly, or for scripting. The first line of output is "protocol" n, where n is an unsigned number identifying the protocol version (currently 1).
In general, tlmgr actions that can be given on the command line translate to commands in this shell mode. For example, you can say "update --list" to see what would be updated. The TLPDB is loaded the first time it is needed (not at the beginning), and used for the rest of the session.
Besides these actions, a few commands are specific to shell mode:
If var or then val is not specified, it is prompted for.
Synonym for "info".
Synonym for remove.
Updates the packages given as arguments to the latest version available at the installation source. Either "--all" or at least one pkg name must be specified. Options:
In addition to updating the installed packages, during the update of a collection the local installation is (by default) synchronized to the status of the collection on the server, for both additions and removals.
This means that if a package has been removed on the server (and thus has also been removed from the respective collection), "tlmgr" will remove the package in the local installation. This is called ``auto-remove'' and is announced as such when using the option "--list". This auto-removal can be suppressed using the option "--no-auto-remove" (not recommended, see option description).
Analogously, if a package has been added to a collection on the server that is also installed locally, it will be added to the local installation. This is called ``auto-install'' and is announced as such when using the option "--list". This auto-installation can be suppressed using the option "--no-auto-install" (also not recommended).
An exception to the collection dependency checks (including the auto-installation of packages just mentioned) are those that have been ``forcibly removed'' by you, that is, you called "tlmgr remove --force" on them. (See the "remove" action documentation.) To reinstall any such forcibly removed packages use "--reinstall-forcibly-removed".
To reiterate: automatic removals and additions are entirely determined by comparison of collections. Thus, if you manually install an individual package "foo" which is later removed from the server, "tlmgr" will not notice and will not remove it locally. (It has to be this way, without major rearchitecture work, because the tlpdb does not record the repository from which packages come from.)
If you want to exclude some packages from the current update run (e.g., due to a slow link), see the "--exclude" option below.
If this option is given together with either "--all" or a list of packages, then "tlmgr" will be updated first and, if this update succeeds, the new version will be restarted to complete the rest of the updates.
In short:
tlmgr update --self # update infrastructure only
tlmgr update --self --all # update infrastructure and all packages
tlmgr update --force --all # update all packages but *not* infrastructure
# ... this last at your own risk, not recommended!
An argument pkg excludes both the package pkg itself and all its related platform-specific packages pkg.ARCH. For example,
tlmgr update --all --exclude a2ping
will not update "a2ping", "a2ping.i386-linux", or any other "a2ping."ARCH package.
If this option specifies a package that would otherwise be a candidate for auto-installation, auto-removal, or reinstallation of a forcibly removed package, "tlmgr" quits with an error message. Excludes are not supported in these circumstances.
This option can also be set permanently in the tlmgr config file with the key "update-exclude".
Furthermore, after the "tlmgr" run using this has finished, the packages that would have been auto-installed will be considered as forcibly removed. So, if "foobar" is the only new package on the server, then
tlmgr update --all --no-auto-install
is equivalent to
tlmgr update --all
tlmgr remove --force foobar
Again, since packages are sometimes renamed or replaced, using this option is not recommended.
This option makes "tlmgr" ignore the forcible removals and re-install all such packages. This can be used to completely synchronize an installation with the server's idea of what is available:
tlmgr update --reinstall-forcibly-removed --all
You can also set options via the "option" action to automatically make backups for all packages, and/or keep only a certain number of backups.
"tlmgr" always makes a temporary backup when updating packages, in case of download or other failure during an update. In contrast, the purpose of this "--backup" option is to save a persistent backup in case the actual content of the update causes problems, e.g., introduces an TeX incompatibility.
The "restore" action explains how to restore from a backup.
Also, "update --list" is still performed regardless of this option.
If the package on the server is older than the package already installed (e.g., if the selected mirror is out of date), "tlmgr" does not downgrade. Also, packages for uninstalled platforms are not installed.
"tlmgr" saves one copy of the main "texlive.tlpdb" file used for an update with a suffix representing the repository url, as in "tlpkg/texlive.tlpdb.main."long-hash-string. Thus, even when many mirrors are used, only one main "tlpdb" backup is kept. For non-main repositories, which do not generally have (m)any mirrors, no pruning of backups is done.
This action does not automatically add or remove new symlinks in system directories; you need to run "tlmgr" "path" yourself if you are using this feature and want new symlinks added.
"tlmgr" reads two configuration files: one is system-wide, in "TEXMFSYSCONFIG/tlmgr/config", and the other is user-specific, in "TEXMFCONFIG/tlmgr/config". The user-specific one is the default for the "conf tlmgr" action. (Run "kpsewhich -var-value=TEXMFSYSCONFIG" or "... TEXMFCONFIG ..." to see the actual directory names.)
A few defaults corresponding to command-line options can be set in these configuration files. In addition, the system-wide file can contain a directive to restrict the allowed actions.
In these config files, empty lines and lines starting with # are ignored. All other lines must look like:
key = value
where the spaces are optional but the "=" is required.
The allowed keys are:
The system-wide config file can contain one additional key:
Finally, the "no-checksums" key needs more explanation. By default, package checksums computed and stored on the server (in the TLPDB) are compared to checksums computed locally after downloading. "no-checksums" disables this process. The checksum algorithm is SHA-512. Your system must have one of (looked for in this order) the Perl "Digest::SHA" module, the "openssl" program (<https://openssl.org>), the "sha512sum" program (from GNU Coreutils, <https://www.gnu.org/software/coreutils>), or finally the "shasum" program (just to support old Macs). If none of these are available, a warning is issued and "tlmgr" proceeds without checking checksums. "no-checksums" avoids the warning. (Incidentally, other SHA implementations, such as the pure Perl and pure Lua modules, are much too slow to be usable in our context.)
"tlmgr" and "install-tl" perform cryptographic verification if possible. If verification is performed and successful, the programs report "(verified)" after loading the TLPDB; otherwise, they report "(not verified)". But either way, by default the installation and/or updates proceed normally.
If a program named "gpg" is available (that is, found in "PATH"), by default cryptographic signatures will be checked: we require the main repository be signed, but not any additional repositories. If "gpg" is not available, by default signatures are not checked and no verification is carried out, but "tlmgr" still proceeds normally.
The behavior of the verification can be controlled by the command line and config file option "verify-repo" which takes one of the following values: "none", "main", or "all". With "none", no verification whatsoever is attempted. With "main" (the default) verification is required only for the main repository, and only if "gpg" is available; though attempted for all, missing signatures of subsidiary repositories will not result in an error. Finally, in the case of "all", "gpg" must be available and all repositories need to be signed.
In all cases, if a signature is checked and fails to verify, an error is raised.
Cryptographic verification requires checksum checking (described just above) to succeed, and a working GnuPG ("gpg") program (see below for search method). Then, unless cryptographic verification has been disabled, a signature file ("texlive.tlpdb.*.asc") of the checksum file is downloaded and the signature verified. The signature is created by the TeX Live Distribution GPG key 0x0D5E5D9106BAB6BC, which in turn is signed by Karl Berry's key 0x0716748A30D155AD and Norbert Preining's key 0x6CACA448860CDC13. All of these keys are obtainable from the standard key servers.
Additional trusted keys can be added using the "key" action.
The executable used for GnuPG is searched as follows: If the environment variable "TL_GNUPG" is set, it is tested and used; otherwise "gpg" is checked; finally "gpg2" is checked.
Further adaptation of the "gpg" invocation can be made using the two environment variables "TL_GNUPGHOME", which is passed to "gpg" as the value for "--homedir", and "TL_GNUPGARGS", which replaces the default options "--no-secmem-warning --no-permission-warning".
"tlmgr" provides a restricted way, called ``user mode'', to manage arbitrary texmf trees in the same way as the main installation. For example, this allows people without write permissions on the installation location to update/install packages into a tree of their own.
"tlmgr" is switched into user mode with the command line option "--usermode". It does not switch automatically, nor is there any configuration file setting for it. Thus, this option has to be explicitly given every time user mode is to be activated.
This mode of "tlmgr" works on a user tree, by default the value of the "TEXMFHOME" variable. This can be overridden with the command line option "--usertree". In the following when we speak of the user tree we mean either "TEXMFHOME" or the one given on the command line.
Not all actions are allowed in user mode; "tlmgr" will warn you and not carry out any problematic actions. Currently not supported (and probably will never be) is the "platform" action. The "gui" action is currently not supported, but may be in a future release.
Some "tlmgr" actions don't need any write permissions and thus work the same in user mode and normal mode. Currently these are: "check", "help", "list", "print-platform", "print-platform-info", "search", "show", "version".
On the other hand, most of the actions dealing with package management do need write permissions, and thus behave differently in user mode, as described below: "install", "update", "remove", "option", "paper", "generate", "backup", "restore", "uninstall", "symlinks".
Before using "tlmgr" in user mode, you have to set up the user tree with the "init-usertree" action. This creates usertree"/web2c" and usertree"/tlpkg/tlpobj", and a minimal usertree"/tlpkg/texlive.tlpdb". At that point, you can tell "tlmgr" to do the (supported) actions by adding the "--usermode" command line option.
In user mode the file usertree"/tlpkg/texlive.tlpdb" contains only the packages that have been installed into the user tree using "tlmgr", plus additional options from the ``virtual'' package "00texlive.installation" (similar to the main installation's "texlive.tlpdb").
All actions on packages in user mode can only be carried out on packages that are known as "relocatable". This excludes all packages containing executables and a few other core packages. Of the 2500 or so packages currently in TeX Live the vast majority are relocatable and can be installed into a user tree.
Description of changes of actions in user mode:
In user mode, the "install" action checks that the package and all dependencies are all either relocated or already installed in the system installation. If this is the case, it unpacks all containers to be installed into the user tree (to repeat, that's either "TEXMFHOME" or the value of "--usertree") and add the respective packages to the user tree's "texlive.tlpdb" (creating it if need be).
Currently installing a collection in user mode installs all dependent packages, but in contrast to normal mode, does not install dependent collections. For example, in normal mode "tlmgr install collection-context" would install "collection-basic" and other collections, while in user mode, only the packages mentioned in "collection-context" are installed.
If a package shipping map files is installed in user mode, a backup of the user's "updmap.cfg" in "USERTREE/web2c/" is made, and then this file regenerated from the list of installed packages.
In user mode, these actions check that all packages to be acted on are installed in the user tree before proceeding; otherwise, they behave just as in normal mode.
In user mode, these actions operate only on the user tree's configuration files and/or "texlive.tlpdb".
In user mode, "tlmgr.log" and <tlmgr-commands.log> are written in the "TEXMFVAR/web2c/" directlry instead of "TEXMFSYSVAR/web2c/".
The main TeX Live repository contains a vast array of packages. Nevertheless, additional local repositories can be useful to provide locally-installed resources, such as proprietary fonts and house styles. Also, alternative package repositories distribute packages that cannot or should not be included in TeX Live, for whatever reason.
The simplest and most reliable method is to temporarily set the installation source to any repository (with the "-repository" or "option repository" command line options), and perform your operations.
When you are using multiple repositories over a sustained length of time, however, explicitly switching between them becomes inconvenient. Thus, it's possible to tell "tlmgr" about additional repositories you want to use. The basic command is "tlmgr repository add". The rest of this section explains further.
When using multiple repositories, one of them has to be set as the main repository, which distributes most of the installed packages. When you switch from a single repository installation to a multiple repository installation, the previous sole repository will be set as the main repository.
By default, even if multiple repositories are configured, packages are still only installed from the main repository. Thus, simply adding a second repository does not actually enable installation of anything from there. You also have to specify which packages should be taken from the new repository, by specifying so-called ``pinning'' rules, described next.
When a package "foo" is pinned to a repository, a package "foo" in any other repository, even if it has a higher revision number, will not be considered an installable candidate.
As mentioned above, by default everything is pinned to the main repository. Let's now go through an example of setting up a second repository and enabling updates of a package from it.
First, check that we have support for multiple repositories, and have only one enabled (as is the case by default):
$ tlmgr repository list List of repositories (with tags if set): /var/www/norbert/tlnet
Ok. Let's add the "tlcontrib" repository (this is a real repository hosted at <http://contrib.texlive.info>) with the tag "tlcontrib":
$ tlmgr repository add http://contrib.texlive.info/current tlcontrib
Check the repository list again:
$ tlmgr repository list
List of repositories (with tags if set):
http://contrib.texlive.info/current (tlcontrib)
/var/www/norbert/tlnet (main)
Now we specify a pinning entry to get the package "classico" from "tlcontrib":
$ tlmgr pinning add tlcontrib classico
Check that we can find "classico":
$ tlmgr show classico package: classico ... shortdesc: URW Classico fonts ...
- install "classico":
$ tlmgr install classico tlmgr: package repositories: ... [1/1, ??:??/??:??] install: classico @tlcontrib [737k]
In the output here you can see that the "classico" package has been installed from the "tlcontrib" repository (@tlcontrib).
Finally, "tlmgr pinning" also supports removing certain or all packages from a given repository:
$ tlmgr pinning remove tlcontrib classico # remove just classico $ tlmgr pinning remove tlcontrib --all # take nothing from tlcontrib
A summary of "tlmgr pinning" actions is given above.
The graphical user interface for "tlmgr" requires Perl/Tk <https://search.cpan.org/search?query=perl%2Ftk>. For Unix-based systems Perl/Tk (as well as Perl of course) has to be installed outside of TL. <https://tug.org/texlive/distro.html#perltk> has a list of invocations for some distros. For Windows the necessary modules are no longer shipped within TeX Live, so you'll have to have an external Perl available that includes them.
We are talking here about the GUI built into tlmgr itself, not about the other tlmgr GUIs, which are: tlshell (Tcl/Tk-based), tlcockpit (Java-based) and, only on Macs, TeX Live Utility. These are invoked as separate programs.
The GUI mode of tlmgr is started with the invocation "tlmgr gui"; assuming Tk is loadable, the graphical user interface will be shown. The main window contains a menu bar, the main display, and a status area where messages normally shown on the console are displayed.
Within the main display there are three main parts: the "Display configuration" area, the list of packages, and the action buttons.
Also, at the top right the currently loaded repository is shown; this also acts as a button and when clicked will try to load the default repository. To load a different repository, see the "tlmgr" menu item.
Finally, the status area at the bottom of the window gives additional information about what is going on.
Display configuration area
The first part of the main display allows you to specify (filter) which packages are shown. By default, all are shown. Changes here are reflected right away.
Package list area
The second are of the main display lists all installed packages. If a repository is loaded, those that are available but not installed are also listed.
Double clicking on a package line pops up an informational window with further details: the long description, included files, etc.
Each line of the package list consists of the following items:
Main display action buttons
Below the list of packages are several buttons:
The other four buttons only work on the selected packages, i.e., those where the checkbox at the beginning of the package line is ticked.
The following entries can be found in the menu bar:
Several toggles are also here. The first is "Expert options", which is set by default. If you turn this off, the next time you start the GUI a simplified screen will be shown that display only the most important functionality. This setting is saved in the configuration file of "tlmgr"; see "CONFIGURATION FILE FOR TLMGR" for details.
The other toggles are all off by default: for debugging output, to disable the automatic installation of new packages, and to disable the automatic removal of packages deleted from the server. Playing with the choices of what is or isn't installed may lead to an inconsistent TeX Live installation; e.g., when a package is renamed.
The final action is to remove the entire TeX Live installation (also not on Windows).
Some generic Perl/Tk options can be specified with "tlmgr gui" to control the display:
A few other obscure options are recognized but not mentioned here. See the Perl/Tk documentation (<https://search.cpan.org/perldoc?Tk>) for the complete list, and any X documentation for general information.
With the "--machine-readable" option, "tlmgr" writes to stdout in the fixed line-oriented format described here, and the usual informational messages for human consumption are written to stderr (normally they are written to stdout). The idea is that a program can get all the information it needs by reading stdout.
Currently this option only applies to the update, install, and "option" actions.
The output format is as follows:
fieldname "\t" value ... "end-of-header" pkgname status localrev serverrev size runtime esttot ... "end-of-updates" other output from post actions, not in machine readable form
The header section currently has two fields: "location-url" (the repository source from which updates are being drawn), and "total-bytes" (the total number of bytes to be downloaded).
The localrev and serverrev fields for each package are the revision numbers in the local installation and server repository, respectively. The size field is the number of bytes to be downloaded, i.e., the size of the compressed tar file for a network installation, not the unpacked size. The runtime and esttot fields are only present for updated and auto-install packages, and contain the currently passed time since start of installation/updates and the estimated total time.
Line endings may be either LF or CRLF depending on the current platform.
Then comes a line with only the literal string "end-of-header".
Each following line until a line with literal string "end-of-updates" reports on one package. The fields on each line are separated by a tab. Here are the fields.
The output format is as follows:
key "\t" value
If a value is not saved in the database the string "(not set)" is shown.
If you are developing a program that uses this output, and find that changes would be helpful, do not hesitate to write the mailing list.
"tlmgr" uses many of the standard TeX environment variables, as reported by, e.g., "tlmgr conf" ("conf").
In addition, for ease in scripting and debugging, "tlmgr" looks for the following environment variables. These are not of interest for normal user installations.
lz4 and gzip are faster in creating tlmgr's local backups, hence they are preferred. The unconditional use of xz for the tlnet containers is unaffected, to minimize download sizes.
TL provides "wget" binaries for platforms where necessary, so some download method should always be available.
This can create problems with systems that are too old, and so can be overridden by setting the environment variable "TEXLIVE_PREFER_OWN" to 1. In this case, executables shipped with TL will be preferred.
Extra compression/download programs not provided by TL, such as gzip, lwp, and curl, are still checked for on the system and used if available, per the above. "TEXLIVE_PREFER_OWN" only applies when the program being checked for is shipped with TL, namely the lz4 and xz compressors and wget downloader.
Exception: on Windows, the "tar.exe" shipped with TL is always used, regardless of any setting.
This script and its documentation were written for the TeX Live distribution (<https://tug.org/texlive>) and both are licensed under the GNU General Public License Version 2 or later.
$Id: tlmgr.pl 63033 2022-04-15 05:19:42Z preining $
| 2022-04-15 | perl v5.34.0 |