uxplay - start AirPlay server
uxplay [-n name] [-s wxh] [-p
[n]] [more OPTIONS ...]
UxPlay 1.62: An open-source AirPlay mirroring (+ audio streaming)
server.
- -n name Specify the
network name of the AirPlay server
- -nh Do NOT append
"@hostname" at end of the AirPlay server name
- -s wxh[@r]Set display
resolution [refresh_rate] default 1920x1080[@60]
- -o Set display
"overscanned" mode on (not usually needed)
- -fs Full-screen (only works
with X11, Wayland and VAAPI)
- -p Use legacy ports UDP
6000:6001:7011 TCP 7000:7001:7100
- -p n Use TCP and UDP
ports n,n+1,n+2. range 1024-65535
-
use "-p n1,n2,n3" to set each port, "n1,n2" for n3 =
n2+1
-
"-p tcp n" or "-p udp n" sets TCP or UDP ports
separately.
- -avdec Force software
h264 video decoding with libav decoder.
- -vp prs Choose
GStreamer h264 parser; default "h264parse"
- -vd dec Choose
GStreamer h264 decoder; default "decodebin"
-
choices: (software) avdec_h264; (hardware) v4l2h264dec,
-
nvdec, nvh264dec, vaapih264dec, vtdec, ...
- -vc cnv Choose
GStreamer videoconverter; default "videoconvert"
-
another choice when using v4l2h264dec: v4l2convert.
- -vs sink Choose the
GStreamer videosink; default "autovideosink"
-
choices: ximagesink,xvimagesink,vaapisink,glimagesink,
-
gtksink,waylandsink,osximagesink,kmssink,d3d11videosink,...
- -vs 0 Streamed audio
only, with no video display window.
- -v4l2 Use Video4Linux2
for GPU hardware h264 video decoding.
- -bt709 A workaround
(bt709 color) that may be needed with -rpi.
- -rpi Same as
"-v4l2" (for RPi=Rasberry Pi).
- -rpigl Same as
"-rpi -vs glimagesink" for RPi.
- -rpifb Same as
"-rpi -vs kmssink" for RPi using framebuffer.
- -rpiwl Same as
"-rpi -vs waylandsink" for RPi using Wayland.
- -as sink Choose the
GStreamer audiosink; default "autoaudiosink"
-
choices:pulsesink,alsasink,pipewiresink,osssink,oss4sink,
-
jackaudiosink,osxaudiosink,wasapisink,directsoundsink,..
- -as 0 (or -a)
Turn audio off, streamed video only.
- -ao x.y Audio offset time
in seconds (default 0.0) in Audio-only mode.
- -ca fn In Airplay
Audio (ALAC) mode, write cover-art to file fn.
- -reset n Reset after
3n seconds client silence (default 5, 0=never).
- -nc Do not close video
window when client stops mirroring
- -nohold Drop
current connection when new client connects.
- -FPSdata Show
video-streaming performance reports sent by client.
- -fps n Set maximum
allowed streaming framerate, default 30
- -f {H|V|I}Horizontal|Vertical
flip, or both=Inversion=rotate 180 deg
- -r {R|L} Rotate 90 degrees
Right (cw) or Left (ccw)
- -m Use random MAC address
(use for concurrent UxPlay's)
- -vdmp [n] Dump h264
video output to "fn.h264"; fn="videodump",
change
-
with "-vdmp [n] filename". If [n] is given, file fn.x.h264
-
x=1,2,.. opens whenever a new SPS/PPS NAL arrives, and <=n
-
NAL units are dumped.
- -admp [n] Dump audio
output to "fn.x.fmt", fmt ={aac, alac, aud}, x
-
=1,2,..; fn="audiodump"; change with "-admp [n]
filename".
-
x increases when audio format changes. If n is given, <= n
-
audio packets are dumped. "aud"= unknown format.
- -d Enable debug
logging
- -v Displays version
information
- -h Displays help
information