DOKK / manpages / debian 12 / vdeplug / libvdeplug_vxlan.1.en
LIBVDEPLUG_VXLAN(1) General Commands Manual LIBVDEPLUG_VXLAN(1)

libvdeplug_vxlan - vxlan vdeplug module

libvdeplug_vxlan.so

This is the libvdeplug module to join vxlan networks. Only one process per host can join each vxlan network.

This module of libvdeplug4 can be used in any program supporting vde like vde_plug, kvm, qemu, user-mode-linux and virtualbox.

The vde_plug_url syntax of this module is the following:


vxlan://[multicast_addr][/OPTION][/OPTION]

If multicast_addr is omitted libvdeplug_vxlan uses the default addresses: 239.0.0.1 for IPv4 and ff05:56de::1 for IPv6.

use IPv4
use IPv6
define the multicast port (default value 4789)
define the virtual network identifier (default value 1)
define the time-to-live (default value 1). hashsize=HASHSIZE set the size of the hash table for packet switching
set the maximum age in seconds of valid packet switching entries
set the (real) network interface to use.

vxlan://239.0.0.1
This vde_plug_url refers to the vxlan network defined on the multicast address 239.0.0.1, vni=1.

Programs using
vxlan://ff15::3/port=12345/vni=42
join the same vxlan network defined by the multicast address ff15::1, port 12345, vni is 42.

Virtual Distributed Ethernet is not related in any way with www.vde.com ("Verband der Elektrotechnik, Elektronik und Informationstechnik" i.e. the German "Association for Electrical, Electronic & Information Technologies").

vde_plug(1),

August 23, 2016 Virtual Distributed Ethernet