| VMM.CFG(5) | vmm | VMM.CFG(5) |
vmm.cfg - configuration file for vmm
vmm.cfg
vmm(1) reads its configuration data from vmm.cfg.
The configuration file is split into multiple sections. A section
starts with the section name, enclosed in square brackets `[' and
`]', followed by `option = value' pairs.
Whitespace around the `=' and at the end of a value is ignored. Empty lines
and lines starting with `#' or `;' will be ignored.
Each value uses one of the following data types:
Most options have a default value, shown in parentheses after the option's name. In order to use a option's default setting, comment out the line, either with a # or ; or simply remove the setting from vmm.cfg.
A minimal vmm.cfg would be:
[database] user = me pass = xxxxxxxx [misc] dovecot_version = 2.2.11
By default vmm(1) looks for the vmm.cfg file in the following directories in the order listed:
The first configuration file found will be used.
The options in the section account are used to specify user account related settings.
delete_directory (default: false) : Boolean
Determines the behavior of vmm(1) when an account is deleted (userdelete). If this option is set to true the user's home directory will be deleted recursively.
directory_mode (default: 448) : Int
Access mode for a user's home directory and all directories
inside. The value has to be specified in decimal (base 10) notation.
For example: `drwx------' → octal 0700 → decimal 448
disk_usage (default: false) : Boolean
Determines whether the disk usage of a user's mail directory always should be summarized, using du(1), and displayed with the account information (userinfo).
This could be slow on large Maildirs. When you have enabled quotas, vmm's userinfo subcommand will also display the current quota usage of the account. You may also use userinfo's optional details-argument du or full, in order to display the current disk usage of an account's mail directory.
password_length (default: 8) : Int
Determines how many characters and/or numbers should be used for randomly generated passwords. Any value less than 8 will be increased to 8.
random_password (default: false) : Boolean
Determines whether vmm(1) should generate a random password when no password was given for the useradd subcommand. If this option is set to false vmm will prompt you to enter a password for the new account.
You can specify the password length of generated passwords with the account.password_length option.
The bin section is used to specify some paths to some binaries required by vmm(1).
doveadm (default: /usr/bin/doveadm) : String
The absolute path to the doveadm(1) binary.
This binary is used to generate a password hash, if misc.password_scheme is set to one of `CRAM-MD5', `HMAC-MD5', `LANMAN', `OTP', `RPA', `SCRAM-SHA-1' or `SKEY'. This binary will be also required if your Python installation doesn't support the md4 hash algorithm (hashlib + OpenSSL) used for the password schemes `PLAIN-MD4' and `NTLM'.
The doveadm(1) binary is also used to create a user's INBOX and additional mailboxes (mailbox.folders), when the mailbox.format is set to mdbox or sdbox.
du (default: /usr/bin/du) : String
The absolute path to du(1). This binary is used to summarize the disk usage of a user's mail directory.
postconf (default: /usr/sbin/postconf) : String
The absolute path to Postfix' postconf(1). This binary is required when vmm(1) has to check for some Postfix settings, e.g. the virtual_alias_expansion_limit.
The database section is used to specify some options required to connect to the database.
host (default: localhost) : String
Hostname or IP address of the database server.
name (default: mailsys) : String
Name of the database.
pass (default: None) : String
Database password.
port (default: 5432) : Int
The TCP port, on which the database server is listening for connections.
sslmode (default: prefer) : String
Determines whether and with what priority an SSL connection will be negotiated with the database server. Possible values are: disabled, allow, prefer, require, verify-ca and verify-full. The modes verify-ca and verify-full are available since PostgreSQL 8.4
user (default: None) : String
Name of the database user.
The domain section specifies some domain related settings.
The quota limit (quota_bytes and quota_messages), service settings (imap, pop3, sieve and smtp) and the transport setting will be applied when a domain is created. In order to modify those settings for an existing domain, use one of the following vmm(1) subcommands:
When an account is created, it inherits all the settings of the domain to which it is added. Different settings for an existing account can be set using the subcommands userquota, userservices and usertransport.
auto_postmaster (default: true) : Boolean
Determines if vmm(1) should create also a postmaster account when a new domain is created (domainadd).
delete_directory (default: false) : Boolean
Specifies whether the domain directory and all user directories inside should be deleted when a domain is deleted (domaindelete).
directory_mode (default: 504) : Int
Access mode for the domain directory in decimal (base 10)
notation.
For example: `drwxrwx---' → octal 0770 → decimal 504
force_deletion (default: false) : Boolean
Force the deletion of accounts and aliases when a domain is deleted (domaindelete).
imap (default: true) : Boolean
Determines whether newly created users can log in via IMAP.
pop3 (default: true) : Boolean
Determines whether newly created users can log in via POP3.
quota_bytes (default: 0) : String
Quota limit in bytes. 0 means unlimited. This limit will be applied to all newly created domains.
The option's value can be written as an integer value, e.g.:
20480. It's also possible to append one of the following prefixes to
the limit: b (bytes), k (kilobytes), M (megabytes) or
G (gigabytes).
1024 is the same as 1024b or 1k.
quota_messages (default: 0) : Int
Quota limit in number of messages. 0 means unlimited. This limit will be applied to all newly created domains.
sieve (default: true) : Boolean
Determines whether newly created users can log in via SIEVE (ManageSieve).
smtp (default: true) : Boolean
Determines whether newly created users can log in via SMTP (SMTP AUTH).
transport (default: lmtp:unix:private/dovecot-lmtp) : String
Default transport for new domains. For details see transport(5).
The mailbox section is used to specify some options for new created mailboxes in the users home directories. The INBOX will be created always.
folders (default: Drafts:Sent:Templates:Trash) : String
A colon separated list of mailboxes that should be created. If no additionally mailboxes should be created, set the value of this option to a single colon (`:').
If you want to create folders containing one or more subfolders, separate them with a single dot (`.').
If you want to use internationalized mailbox names (e.g. `Wysłane' or `Gelöschte Objekte'), write their names UTF-8 encoded. vmm(1) will convert internationalized mailbox names to a modified version of the UTF-7 encoding (see also: RFC 3501, section 5.1.3).
format (default: maildir) : String
The mailbox format to be used for a user's mailbox. Depending on the used Dovecot version (misc.dovecot_version) vmm(1) supports up to three formats:
root (default: Maildir) : String
Name of the mailbox root directory in a user's home directory. Commonly used names, depending on the used mailbox.format, are Maildir, mdbox or sdbox.
subscribe (default: true) : Boolean
When this option is set to true, the mailboxes from the mailbox.folders option will be listed in the user's subscriptions file. If you don't want to subscribe the created mailboxes, set this option to false.
The misc section is used to define miscellaneous settings.
base_directory (default: /srv/mail) : String
All domain directories will be created inside this directory.
crypt_blowfish_rounds (default: 5) : Int
Number of encryption rounds for the password_scheme BLF-CRYPT.
The value must be in range 4 - 31.
crypt_sha256_rounds (default: 5000) : Int
Number of encryption rounds for the password_scheme SHA256-CRYPT.
The value must be in range 1000 - 999999999.
crypt_sha512_rounds (default: 5000) : Int
Number of encryption rounds for the password_scheme SHA512-CRYPT.
The value must be in range 1000 - 999999999.
dovecot_version (default: None) : String
The version number of the currently used Dovecot version. (see:
dovecot --version)
When, for example, the command dovecot --version prints 2.0.beta4
(8818db00d347), set the value of this option to 2.0.beta4.
password_scheme (default: CRAM-MD5) : String
Password scheme to use. To get a list of all usable password schemes execute the command vmm lp.
With Dovecot ≥ v1.1.alpha1 it is also possible to append an encoding suffix to the password_scheme. Supported encoding suffixes are: .b64, .base64 and .hex. For example: PLAIN.BASE64
An example configuration. All options that are not listed in the configuration file will have their default values.
[account] password_length = 10 random_password = true [database] host = dbsrv8.example.net pass = PY_SRJ}L/0p-oOk port = 5433 sslmode = require user = vmm [domain] quota_bytes = 500M quota_messages = 10000 [mailbox] folders = Drafts:Sent:Templates:Trash:Lists.Dovecot:Lists.Postfix [misc] crypt_sha512_rounds = 10000 dovecot_version = 2.2.11 password_scheme = SHA512-CRYPT.hex
vmm and its manual pages were written by Pascal Volk <user+vmm AT localhost.localdomain.org> and are licensed under the terms of the BSD License.
| 2014-02-17 | vmm 0.7 |