DOKK / manpages / debian 12 / w1retap / w1find.1.en
W1FIND(1)   W1FIND(1)

w1find - Find 1-Wire weather sensors

w1find DEVICE

w1find searches for and displays sensors for the w1retap(1) package.

DEVICE

Interface device, the DEVICE can be serial DS2480 adaptor or a USB DS2490-1 adaptor. Use the serial device node (eg /dev/ttyS0 or /dev/ttyUSB0) for serial or use DS2490-1 to use libusb for a USB adaptor.

•$ w1find /dev/ttyUSBS0

•$ w1find DS2490-1

The w1retap daemon accepts three signals. SIGUSR1 causes it to read all the sensors immediately. SIGUSR2 causes it to print the current configuration. SIGHUP causes it to re-read the configuration.

0

Returns 0 on success

1

Returns 1 on failure

w1retap(1), w1sensors(1)

•/usr/share/doc/w1retap-doc/w1retap.odt

•http://www.zen35309.zen.co.uk/wx/tech.html

This manual page was written by Thomas Stewart <thomas@stewarts.org.uk> for the Debian GNU/Linux system (but may be used by others). Permission is granted to modify and distribute this manpage under the terms of GNU General Public Licence version 2 or (at your opinion) any later version.

03/23/2023