jt9 - processes JT4/9/65, FT8 and QRA64 information in wav
files
Usage: jt9 [OPTIONS] file1 [file2 ...]
- Reads data from *.wav files.
- jt9 -s <key> [-w patience] [-m threads] [-e path] [-a path]
[-t path] Gets data from shared memory region with key==<key>
- -h
- --help
- Display this help message
- -s KEY
- --shmem KEY
- Use shared memory for sample data
- -p MINUTES
- --tr-period
MINUTES
- Tx/Rx period, default MINUTES=1
- -e PATH
- --executable-path
PATH
- Location of subordinate executables (KVASD) default
PATH="."
- -a PATH
- --data-path
PATH
- Location of writeable data files, default PATH="."
- -t PATH
- --temp-path
PATH
- Temporary files path, default PATH="."
- -L HERTZ
- --lowest
HERTZ
- Lowest frequency decoded (JT65), default HERTZ=200
- -H HERTZ
- --highest
HERTZ
- Highest frequency decoded, default HERTZ=4007
- -S HERTZ
- --split
HERTZ
- Lowest JT9 frequency decoded, default HERTZ=2700
- -f HERTZ
- --rx-frequency
HERTZ
- Receive frequency offset, default HERTZ=1500
- -w PATIENCE
- --patience
PATIENCE
- FFTW3 planing patience (0-4), default PATIENCE=1
- -m THREADS
- --fft-threads
THREADS
- Number of threads to process large FFTs, default THREADS=1
- -6
- --jt65
- JT65 mode
- -9
- --jt9
- JT9 mode
- -8
- --ft8
- FT8 mode
- -4
- --jt4
- JT4 mode
- -q
- --qra64
- QRA64 mode
- -b A
- --sub-mode A
- Sub mode, default SUBMODE=A
- -d DEPTH
- --depth
DEPTH
- JT9 decoding depth (1-3), default DEPTH=1
- -T
- --tx-jt9
- Tx mode is JT9
- -c CALL
- --my-call CALL
- my callsign.HP
- -G GRID
- --my-grid GRID
- my grid locator
- -x CALL
- --his-call CALL
- Their callsign
- -g GRID
- --his-grid
GRID
- Their grid locator
- -X FLAGS
- --experience-decode
FLAGS
- experience based decoding flags (1..n), default FLAGS=0
The full documentation for jt9 is maintained as a Texinfo
manual. If the info and jt9 programs are properly installed at
your site, the command
- info jt9
should give you access to the complete manual.
This manual page was written by Dave Hibberd
<d@vehibberd.com>