DOKK / manpages / debian 13 / bluez / bluetoothctl-endpoint.1.en
BLUETOOTHCTL-ENDPOINT(1) Linux System Administration BLUETOOTHCTL-ENDPOINT(1)

bluetoothctl-endpoint - Endpoint Submenu

bluetoothctl [--options] [endpoint.commands]

List available endpoints.

> list [local]

Endpoint information.

> show [endpoint]

Register Endpoint.

> register <UUID> <codec[:company]> [capabilities...]
>endpoint.register 00002bcb-0000-1000-8000-00805f9b34fb 0x06
>Auto Accept (yes/no): y
>Max Transports (auto/value): a
>Locations: a
>Supported Context (value): 3
>Context (value): 3
>CIG (auto/value): a
>CIS (auto/value): a

>endpoint.register 00002bc9-0000-1000-8000-00805f9b34fb 0x06 "0x03 0xe5 0x03 0x00 0x02 0xe6 0x07"
>Enter Metadata (value/no): n
>Auto Accept (yes/no): y
>Max Transports (auto/value): a
>Locations: a
>Supported Context (value): 3
>Context (value): 3
>CIG (auto/value): a
>CIS (auto/value): a

>endpoint.register 00001852-0000-1000-8000-00805f9b34fb 0x06
>Auto Accept (yes/no): y
>Max Transports (auto/value): a
>Locations: 3
>Supported Context (value): 1

>endpoint.register 00001851-0000-1000-8000-00805f9b34fb 0x06
>Auto Accept (yes/no): y
>Max Transports (auto/value): a
>Locations: 3
>Supported Context (value): 1


Note:

If running the setup with an audio server that has LE Audio support (such as PipeWire) it will automatically register endpoints according to the configured roles. For more details about configuring a Broadcast Source with PipeWire check:
<https://gitlab.freedesktop.org/pipewire/pipewire/-/blob/master/doc/dox/config/pipewire-props.7.md>

Unregister Endpoint.

> unregister <UUID/object>

Note:

If the endpoint was registered by an audio server, it can't be unregistered from bluetoothctl. This must be done by the audio server as well.

Configure Endpoint.

> config <endpoint> <local endpoint> [preset]

Note:

If the endpoint was registered by an audio server, it can't be configured from bluetoothctl. This must be done by the audio server as well.

List available presets.

> presets <endpoint>/<UUID> [codec[:company]] [preset] [codec config] [metadata]
>presets /local/endpoint/ep0 32_1_1
>presets /local/endpoint/ep0
Preset 32_1_1
Configuration.**>0: len 0x02 type 0x01
Configuration.Sampling Frequency: 32 Khz (0x06)
Configuration.**>1: len 0x02 type 0x02
Configuration.Frame Duration: 7.5 ms (0x00)
Configuration.**>2: len 0x03 type 0x04
Configuration.Frame Length: 60 (0x003c)

>presets 00002bc9-0000-1000-8000-00805f9b34fb 0x06 32_1_1
>presets 00002bc9-0000-1000-8000-00805f9b34fb 0x06
...
*32_1_1

>presets 00002bc9-0000-1000-8000-00805f9b34fb 0x06 custom
>[Codec] Enter frequency (Khz): 48
>[Codec] Enter frame duration (ms): 10
>[Codec] Enter channel allocation: 3
>[Codec] Enter frame length: 100
>[QoS] Enter Target Latency (Low, Balance, High): Low
>[QoS] Enter SDU Interval (us): 1000
>[QoS] Enter Framing (Unframed, Framed): Unframed
>[QoS] Enter PHY (1M, 2M): 2M
>[QoS] Enter Max SDU: 200
>[QoS] Enter RTN: 3
>[QoS] Enter Max Transport Latency (ms): 10
>[QoS] Enter Presentation Delay (us): 20000
>presets 00002bc9-0000-1000-8000-00805f9b34fb 0x06
...
*custom

>presets 00002bc9-0000-1000-8000-00805f9b34fb 0x06 custom "0x03 0xe8 0x00 0x00 0x02 0xe9 0x00"
>[Codec] Enter frequency (Khz): 48
>[Codec] Enter frame duration (ms): 10
>[Codec] Enter channel allocation: 3
>[Codec] Enter frame length: 100
>[QoS] Enter Target Latency (Low, Balance, High): Low
>[QoS] Enter SDU Interval (us): 1000
>[QoS] Enter Framing (Unframed, Framed): Unframed
>[QoS] Enter PHY (1M, 2M): 2M
>[QoS] Enter Max SDU: 200
>[QoS] Enter RTN: 3
>[QoS] Enter Max Transport Latency (ms): 10
>[QoS] Enter Presentation Delay (us): 20000
>presets 00002bc9-0000-1000-8000-00805f9b34fb 0x06
...
*custom



<http://www.bluez.org>


<linux-bluetooth@vger.kernel.org>

Free use of this software is granted under the terms of the GNU Lesser General Public Licenses (LGPL).

November 2022 BlueZ