fence_drac - Power Fencing agent for Dell DRAC IV
fence_drac is a Power Fencing agent which can be used with the
Dell Remote Access Card (DRAC). This card provides remote access to
controlling power to a server. It logs into the DRAC through the telnet
interface of the card. By default, the telnet interface is not enabled. To
enable the interface, you will need to use the racadm command in the
racser-devel rpm available from Dell. To enable telnet on the DRAC: [root]#
racadm config -g cfgSerial -o cfgSerialTelnetEnable 1 [root]# racadm
racreset
The fence agent accepts options on the command line as well as
from stdin. Fenced sends parameters through stdin when it execs the agent.
The agent can be run by itself with command line options. This is useful for
testing and for turning outlets on or off from scripts.
Vendor URL: http://www.dell.com
- -o,
--action=[action]
- Fencing action (Default Value: reboot)
- -c,
--command-prompt=[prompt]
- Force Python regex for command prompt (Default Value: ['\\[username\\]#
'])
- -a, --ip=[ip]
- IP address or hostname of fencing device
- -u,
--ipport=[port]
- TCP/UDP port to use for connection with device (Default Value: 23)
- -p,
--password=[password]
- Login password or passphrase
- -S,
--password-script=[script]
- Script to run to retrieve password
- -n, --plug=[ip]
- IP address or hostname of fencing device (together with --port-as-ip)
- -l,
--username=[name]
- Login name This parameter is always required.
- -q, --quiet
- Disable logging to stderr. Does not affect --verbose or --debug-file or
logging to syslog.
- -v, --verbose
- Verbose mode. Multiple -v flags can be stacked on the command line (e.g.,
-vvv) to increase verbosity.
- --verbose-level
- Level of debugging detail in output. Defaults to the number of --verbose
flags specified on the command line, or to 1 if verbose=1 in a stonith
device configuration (i.e., on stdin).
- -D,
--debug-file=[debugfile]
- Write debug information to given file
- -V, --version
- Display version information and exit
- -h, --help
- Display help and exit
- --plug-separator=[char]
- Separator for plug parameter when specifying more than 1 plug (Default
Value: ,)
- --delay=[seconds]
- Wait X seconds before fencing is started (Default Value: 0)
- --disable-timeout=[true/false]
- Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
- --login-timeout=[seconds]
- Wait X seconds for cmd prompt after login (Default Value: 5)
- --port-as-ip
- Make "port/plug" to be an alias to IP address
- --power-timeout=[seconds]
- Test X seconds for status change after ON/OFF (Default Value: 20)
- --power-wait=[seconds]
- Wait X seconds after issuing ON/OFF (Default Value: 0)
- --shell-timeout=[seconds]
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- --stonith-status-sleep=[seconds]
- Sleep X seconds between status calls during a STONITH action (Default
Value: 1)
- --retry-on=[attempts]
- Count of attempts to retry power on (Default Value: 1)
- --telnet-path=[path]
- Path to telnet binary (Default Value: /usr/bin/telnet)
- on
- Power on machine.
- off
- Power off machine.
- reboot
- Reboot machine.
- status
- This returns the status of the plug/virtual machine.
- monitor
- Check the health of fence device
- metadata
- Display the XML metadata describing this resource.
- manpage
-
The operational behavior of this is not known.
- validate-all
- Validate if all required parameters are entered.
- action
- Fencing action (Default Value: reboot)
- command_prompt
- Force Python regex for command prompt (Default Value: ['\\[username\\]#
']) Obsoletes: cmd_prompt
- ip
- IP address or hostname of fencing device Obsoletes: ipaddr
- ipport
- TCP/UDP port to use for connection with device (Default Value: 23)
- password
- Login password or passphrase Obsoletes: passwd
- password_script
- Script to run to retrieve password Obsoletes: passwd_script
- plug
- IP address or hostname of fencing device (together with --port-as-ip)
Obsoletes: port
- username
- Login name This parameter is always required. Obsoletes: login
- quiet
- Disable logging to stderr. Does not affect --verbose or --debug-file or
logging to syslog.
- verbose
- Verbose mode. Multiple -v flags can be stacked on the command line (e.g.,
-vvv) to increase verbosity.
- verbose_level
- Level of debugging detail in output. Defaults to the number of --verbose
flags specified on the command line, or to 1 if verbose=1 in a stonith
device configuration (i.e., on stdin).
- debug_file
- Write debug information to given file Obsoletes: debug
- version
- Display version information and exit
- help
- Display help and exit
- plug_separator
- Separator for plug parameter when specifying more than 1 plug (Default
Value: ,)
- delay
- Wait X seconds before fencing is started (Default Value: 0)
- disable_timeout
- Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
- login_timeout
- Wait X seconds for cmd prompt after login (Default Value: 5)
- port_as_ip
- Make "port/plug" to be an alias to IP address
- power_timeout
- Test X seconds for status change after ON/OFF (Default Value: 20)
- power_wait
- Wait X seconds after issuing ON/OFF (Default Value: 0)
- shell_timeout
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- stonith_status_sleep
- Sleep X seconds between status calls during a STONITH action (Default
Value: 1)
- retry_on
- Count of attempts to retry power on (Default Value: 1)
- telnet_path
- Path to telnet binary (Default Value: /usr/bin/telnet)