• A simple install-purge test within one Debian distribution (chosen with the -d option, unstable by default). It sets up the chroot with the desired distribution, then installs and purges the packages, and reports problems.
• A simple install-upgrade-purge test within one Debian distribution. This test is like the install-purge test, but it installs the packages first via apt-get and then upgrades them with the package files given on the command line. If the command line has package names (option --apt used), or no tested package is known to apt-get (new packages), this test is skipped, otherwise it is performed automatically.
• An upgrade test between Debian releases. This test is enabled by using the -d option multiple times and disables the other two tests. It sets up the chroot with the first distribution named, then upgrades it to each successive one, and then remembers the directory tree state at the end. After this, it starts over with the chroot of the first distribution, installs the desired packages (via apt-get install), and does the successive upgrading (via apt-get dist-upgrade). Then, if package files (and not just package names) were given on the command line, it installs them. Finally, it reports problems against the state of the directory tree at the last distribution compared with the state without the packages having been installed. This test can be quite slow to execute. Note that this does not work with experimental, because apt-get does not automatically upgrade to packages in experimental. To test a particular package or group of packages in experimental, use the second test.

-a, --apt

The package arguments on the command line are to be treated as package names and installed via apt-get install instead of being names of package files, to be installed via dpkg -i.

--allow-database

Allow starting MySQL and PostgreSQL database servers in the chroot for packages requiring database access in their maintainer scripts. Do not use this option if there is already a database server running on the system running piuparts (or piuparts-slave)! In master-slave setups with multiple slaves running on one host collisions may occur, these will be detected by detect_piuparts_issues and the affected packages will be tested again.

--arch arch

Create chroot and run tests for (non-default) architecture arch. The default is the output from dpkg --print-architecture.

-b tarball, --basetgz tarball

Use tarball as the contents of the initial chroot, instead of building a new one with debootstrap.

The tarball can be created with the -s option, or you can use one that pbuilder has created (see -p). If you create one manually, make sure the root of the chroot is the root of the tarball. Despite the option name implying gzip compression, the compression scheme is deduced by tar from the filename suffix.

--bindmount dir

Bind-mount a directory inside the chroot.

--bootstrapcmd cmd

Set alternative chroot bootstrap command (including command line options). The default is debootstrap --variant=minbase. Needs to be compatible with typical debootstrap command line options such as --arch and --include. For mmdebstrap use: --bootstrapcmd=mmdebstrap --skip=check/empty --variant=minbase.

-d name, --distribution name

Which Debian distribution to use: a code name (for example bullseye, bookworm or sid) or experimental. The default is sid (= unstable).

-D flavor, --defaults flavor

Use default settings suitable for a particular flavor of Debian: either debian or ubuntu. The default is debian.

--do-not-verify-signatures

Do not verify signatures from the Release files when running debootstrap. Also set APT::Get::AllowUnauthenticated accordingly in /etc/apt/apt.conf in the chroots.

--dpkg-force-confdef

Make dpkg use --force-confdef, which lets dpkg always choose the default action when a modified conffile is found. This option will make piuparts ignore errors it was designed to report and therefore should only be used to hide problems in depending packages. This option shall normally not be used. (See #466118.)

--dpkg-noforce-unsafe-io

Prevent running dpkg with --force-unsafe-io. --force-unsafe-io causes dpkg to skip certain file system syncs known to cause substantial performance degradation on some filesystems. Thus, including this option reverts to safe but slower behavior. The --dpkg-noforce-unsafe-io is required for running tests on distributions older than squeeze.

--no-eatmydata

Prevent use of eatmydata. The --no-eatmydata option is required for running tests on squeeze or older distributions.

--extra-old-packages pkg1[,pkg2]...

Install additional old packages before upgrading. Allows testing package renames/merges where the old package is no longer available in the new distribution and the new one utilizes Conflicts/Replaces. The argument is a comma separated list of package names and the option can be given multiple times. For install/purge tests these packages will be installed before the package that is to be tested.

-e dirname, --existing-chroot dirname

Use the specified directory as source for the new chroot, instead of building a new one with debootstrap. This is similar to --basetgz, but the contents are not archived. See also the --hard-link option.

--distupgrade-to-testdebs

Use the "testdebs" repository to override the packages in the distupgrade target distribution. This allows one to test complex upgrade paths before the packages enter the archive.

--extra-repo deb-line

Provide an additional (unparsed) line to be appended to sources.list, for example:

'deb <URL> <distrib> <components>'


 or
'deb file:// </bind/mount> ./'

Useful for e.g. backports, security or local repositories that cannot be handled by --mirror. May be repeated to add more than one line.

--fake-essential-packages pkg1[,pkg2]...

Install additional packages in the base chroot that are not removed after the test. These are available during purge and for checking against mistreatment. Takes a comma separated list of package names and can be given multiple times.

--hard-link

When the --existing-chroot option is used, and the source directory is on the same filesystem, hard-link files instead of copying them. This is faster, but any modifications to files will be reflected in the originals.

-i filename, --ignore filename

Add a filename to the list of filenames to be ignored when comparing changes before and after installation. By default, piuparts ignores files that always change during a package installation and uninstallation, such as dpkg status files. The filename should be relative to the root of the chroot (e.g., var/lib/dpkg/status). Filenames prefixed with a : will be logged verbosely if found. This option can be used as many times as necessary.

-I regexp, --ignore-regexp regexp

Add a regular expression pattern to the list of patterns for filenames to be ignored when comparing changes before and after installation. Patterns prefixed with a : will log verbosely all matching files. This option can be used as many times as necessary.

--install-purge-install

Purge package after installation and reinstall. All dependencies are available during purge.

--install-recommends

Enable installation of Recommends.

--install-suggests

Enable installation of Suggests.

--install-remove-install

Remove package after installation and reinstall. For testing installation in config-files-remaining state.

-k, --keep-env

Depending on which option is passed, keep the environment used for testing after the program ends

-K filename, --keyring filename

Use filename as the keyring to use with debootstrap when creating chroots.

--keep-sources-list

Don't modify the chroot's /etc/apt/sources.list.

--list-installed-files

List the files added to the chroot after the installation of the package and after the installation of the package dependencies.

--lvm-volume lvm-volume

Use the specified lvm-volume as source for the chroot, instead of building a new one with debootstrap. This creates a snapshot of the given LVM volume and mounts it to the chroot path.

--lvm-snapshot-size snapshot-size

Use the specified snapshot-size as snapshot size when creating a new LVM snapshot (default: 1G)

-l filename, --log-file filename

Append log file to filename in addition to the standard output.

--log-level level

Display messages from loglevel level, possible values are: error, info, dump, debug. The default is dump.

--max-command-output-size size

Set the maximum permitted command output to size (in MB) for debugging runs exceeding the default of 8 MB.

--merged-usr

When using debootstrap to create the chroot, use the --merged-usr option to create a chroot with /bin, /lib, /sbin being symlinks to their /usr counterparts.

--no-merged-usr

When using debootstrap to create the chroot, use the --no-merged-usr option.

-m URL, --mirror URL

Note that file: addresses work if the directories are made accessible from within the chroot with --bindmount.

--no-adequate

Don't run adequate after installation. The default is to run adequate, provided it is installed.

--no-check-valid-until

Set apt option Acquire::Check-Valid-Until=false in the chroot to ignore the expiration of Release files. This is needed for testing archived releases.

--no-diversions

Don't check for broken diversions.

-n, --no-ignores

Forget all built-in and other ignores that have been set so far. Any -i or -I arguments that come after this one will be obeyed, but none of the ones that come before.

-N, --no-symlinks

Don't check for broken symlinks.

--fail-if-inadequate

Fail on inadequate results from running adequate. The default is to just issue those errors as warnings.

--fail-on-broken-symlinks

Fail on broken symlinks. The default is to just issue those errors as warnings.

--no-upgrade-test

Skip testing upgrade from an existing version in the archive.

--no-install-purge-test

Skip the install and purge test.

-p, --pbuilder

Use /var/cache/pbuilder/base.tgz as the base tarball. This is a shorthand so that you don't need to use -b for it.

--pedantic-purge-test

Be pedantic when checking if a purged package leaves files behind. If this option is not set, files left in /tmp are ignored.

--proxy URL

Use the proxy at URL to access the Debian mirror(s). Takes precedence over the http_proxy environment variable. Using a local proxy is recommended because piuparts may use large amounts of bandwidth to repeatedly download the same files.

-s filename, --save filename

Save the chroot, after it has been set up, as a tarball into filename. It can then be used with -b.

-B filename, --end-meta filename

Load chroot package selection and file meta data from filename. See the function install_and_upgrade_between_distros() in piuparts.py for defaults. Mostly useful for large scale distro upgrade tests.

-S filename, --save-end-meta filename

Save chroot package selection and file meta data in filename for later use. See the function install_and_upgrade_between_distros() in piuparts.py for defaults. Mostly useful for large scale distro upgrade tests.

--scriptsdir directory

Directory where are custom scripts are placed. By default, this is not set. For more information about this, read README_server.txt

--schroot SCHROOT-NAME

Use schroot session named SCHROOT-NAME for the testing environment, instead of building a new one with debootstrap.

--docker-image DOCKER-IMAGE

Use a container created from the docker image DOCKER-IMAGE for the testing environment, instead of building a new one with debootstrap. This only supports overlay2 for now and it uses the MergedDir layer where piuparts can access, add, edit and remove files easily by directly accessing the directory.

--single-changes-list

When processing changes files, piuparts will process the packages in each individual changes file separately. This option will set piuparts to scan the packages of all changes files together along with any individual package files that may have been given on the command line.

--single-packages

Process every package file or package name individually, thus piuparts process runs multiple times. This option can be useful with conflicting packages.

--shell-on-error

Start an interactive shell in the chroot after an error occurred. This should help debugging failures directly inside the piuparts test environment. The chroot cleanup will continue after the shell terminates. Note: This does not work if the piuparts command is prefixed with 'timeout', which is usually the case in command lines directly copied from logfiles from a master-slave setup. Removing the 'timeout' part is sufficient.

--skip-minimize

Allow skip minimize chroot step. This is useful when you want to test several packages with piuparts. You can prepare a tarball already minimized and skip this step in all the tests. This is the default now.

--minimize

Minimize the chroot with debfoster. This used to be the default until #539142 was fixed.

--skip-cronfiles-test

Skip testing the output from the cron files left in the system after remove a package.

--skip-logrotatefiles-test

Skip testing the output from the logrotate files left in the system after remove a package.

--testdebs-repo deb-line

Provide an additional line to be appended to sources.list, for example:

'deb [ trusted=yes ] <URL> <distrib> <components>'


 or
'deb [ trusted=yes ] file:// </bind/mount> ./'

If only an URL or local path is given as argument, deb [ trusted=yes ], file://, and ./ will be prepended/appended as needed. The "testdebs" repository provides the packages to be tested (and some additional dependencies, if needed, e.g. all packages built from the same source package as the (binary) package being tested) and can be used for testing complex installation and upgrade scenarios involving dependencies that are not yet in the archive. This repository will be available only for installing the target packages. Dependency resolution will be done by apt-get. The packages to be tested can be passed as .debs or as package names (with --apt).

The trusted=yes option causes this (and only this) repository to be trustworthy even if the Packages file is not signed, such that a (globally acting) --do-not-verify-signatures will not be needed.

-t directory, --tmpdir directory

Use directory as the place where temporary files and directories are created. The default is the environment variable TMPDIR, or /tmp if not set. Note: the temporary directory must not be mounted with the nodev or nosuid mount option.

--update-retries num-retries

Rerun apt-get update up to num-retries times. Useful to work around temporary network failures and hashsum mismatch errors.

--upgrade-before-dist-upgrade

Perform two-stage upgrades: apt-get upgrade && apt-get dist-upgrade.

-v, --verbose

This option no longer has any meaning, but it is still accepted for backwards compatibility.

-V, --version

Write out the version number of the program.

--warn-on-debsums-errors

Print a warning rather than failing if debsums reports modified files.

--warn-on-leftovers-after-purge

Print a warning rather than failing if files are left behind after purge.

--warn-on-others

Print a warning rather than failing if files are left behind, modified, or removed by a package that was not given on the command-line.

This way, you can basically isolate the purge test to your own packages. If a package that is brought in as a dependency doesn't purge cleanly, the test will not fail because of it (but a warning message will be printed).

Behavior with multiple packages given on the command-line could be problematic, particularly if the dependency tree of one package in the list includes another in the list. Therefore, it is recommended to use this option with one package at a time.

--warn-on-usr-move disabled|warn|fail

Whether to enable the test (with a warning or a failure) that checks if files are moved between /bin|sbin|lib* and /usr/bin|sbin|lib*. Accepted values: disabled (default), warn, fail.

TMPDIR

Location for temporary files and directories. If not set, use /tmp. See also the --tmpdir option.