options:

-h, --help

show this help message and exit

--gpureset

Reset specified GPU (One GPU must be specified)

--load FILE

Load Clock, Fan, Performance and Profile settings from FILE

--save FILE

Save Clock, Fan, Performance and Profile settings to FILE

-V, --version

Show version information

-d DEVICE [DEVICE ...], --device DEVICE [DEVICE ...]

Execute command on specified device

Display Options:

--alldevices

--showhw

Show Hardware details

-a, --showallinfo

Show Temperature, Fan and Clock values

Topology:

-i, --showid

Show DEVICE IDs

-v, --showvbios

Show VBIOS version

-e [EVENT ...], --showevents [EVENT ...]

Show event list

--showdriverversion

Show kernel driver version

--showtempgraph

Show Temperature Graph

--showfwinfo [BLOCK ...]

Show FW information

--showmclkrange

Show mclk range

--showmemvendor

Show GPU memory vendor

--showsclkrange

Show sclk range

--showproductname

Show product details

--showserial

Show GPU's Serial Number

--showuniqueid

Show GPU's Unique ID

--showvoltagerange

Show voltage range

--showbus

Show PCI bus number

Pages information:

--showpagesinfo

Show retired, pending and unreservable pages

--showpendingpages

Show pending retired pages

--showretiredpages

Show retired pages

--showunreservablepages

Show unreservable pages

Hardware-related information:

-f, --showfan

Show current fan speed

-P, --showpower

Show current average or instant socket graphics package power consumption

-t, --showtemp

Show current temperature

-u, --showuse

Show current GPU use

--showmemuse

Show current GPU memory used

--showvoltage

Show current GPU voltage

Software-related/controlled information:

-b, --showbw

Show estimated PCIe use

-c, --showclocks

Show current clock frequencies

-g, --showgpuclocks

Show current GPU clock frequencies

-l, --showprofile

Show Compute Profile attributes

-M, --showmaxpower

Show maximum graphics package power this GPU will consume

-m, --showmemoverdrive

Show current GPU Memory Clock OverDrive level

-o, --showoverdrive

Show current GPU Clock OverDrive level

-p, --showperflevel

Show current DPM Performance Level

-S, --showclkvolt

Show supported GPU and Memory Clocks and Voltages

-s, --showclkfrq

Show supported GPU and Memory Clock

--showmeminfo TYPE [TYPE ...]

Show Memory usage information for given block(s) TYPE

--showpids [VERBOSE]

Show current running KFD PIDs (pass details to VERBOSE for detailed information)

--showpidgpus [SHOWPIDGPUS ...]

Show GPUs used by specified KFD PIDs (all if no arg given)

--showreplaycount

Show PCIe Replay Count

--showrasinfo [SHOWRASINFO ...]

Show RAS enablement information and error counts for the specified block(s) (all if no arg given)

--showvc

Show voltage curve

--showxgmierr

Show XGMI error information since last read

--showtopo

Show hardware topology information

--showtopoaccess

Shows the link accessibility between GPUs

--showtopoweight

Shows the relative weight between GPUs

--showtopohops

Shows the number of hops between GPUs

--showtopotype

Shows the link type between GPUs

--showtoponuma

Shows the numa nodes

--showenergycounter

Energy accumulator that stores amount of energy consumed

--shownodesbw

Shows the numa nodes

--showcomputepartition

Shows current compute partitioning

--showmemorypartition

Shows current memory partition

Set options:

--setclock TYPE LEVEL

Set Clock Frequency Level(s) for specified clock (requires manual Perf level)

--setsclk LEVEL [LEVEL ...]

Set GPU Clock Frequency Level(s) (requires manual Perf level)

--setmclk LEVEL [LEVEL ...]

Set GPU Memory Clock Frequency Level(s) (requires manual Perf level)

--setpcie LEVEL [LEVEL ...]

Set PCIE Clock Frequency Level(s) (requires manual Perf level)

--setslevel SCLKLEVEL SCLK SVOLT

Change GPU Clock frequency (MHz) and Voltage (mV) for a specific Level

--setmlevel MCLKLEVEL MCLK MVOLT

Change GPU Memory clock frequency (MHz) and Voltage for (mV) a specific Level

--setvc POINT SCLK SVOLT

Change SCLK Voltage Curve (MHz mV) for a specific point

--setsrange SCLKMIN SCLKMAX

Set min and max SCLK speed

--setextremum min|max sclk|mclk CLK

Set min/max of SCLK/MCLK speed

--setmrange MCLKMIN MCLKMAX

Set min and max MCLK speed

--setfan LEVEL

Set GPU Fan Speed (Level or %)

--setperflevel LEVEL

Set Performance Level

--setoverdrive %

Set GPU OverDrive level (requires manual|high Perf level)

--setmemoverdrive %

Set GPU Memory Overclock OverDrive level (requires manual|high Perf level)

--setpoweroverdrive WATTS

Set the maximum GPU power using Power OverDrive in Watts

--setprofile SETPROFILE

Specify Power Profile level (#) or a quoted string of CUSTOM Profile attributes "# # # #..." (requires manual Perf level)

--setperfdeterminism SCLK

Set clock frequency limit to get minimal performance variation

--setcomputepartition {CPX,SPX,DPX,TPX,QPX,cpx,spx,dpx,tpx,qpx}

Set compute partition

--setmemorypartition {NPS1,NPS2,NPS4,NPS8,nps1,nps2,nps4,nps8}

Set memory partition

--rasenable BLOCK ERRTYPE

Enable RAS for specified block and error type

--rasdisable BLOCK ERRTYPE

Disable RAS for specified block and error type

--rasinject BLOCK

Inject RAS poison for specified block (ONLY WORKS ON UNSECURED BOARDS)

Reset options:

-r, --resetclocks

Reset clocks and OverDrive to default

--resetfans

Reset fans to automatic (driver) control

--resetprofile

Reset Power Profile back to default

--resetpoweroverdrive

Set the maximum GPU power back to the device default state

--resetxgmierr

Reset XGMI error count

--resetperfdeterminism

Disable performance determinism

--resetcomputepartition

Resets to boot compute partition state

--resetmemorypartition

Resets to boot memory partition state

Auto-response options:

--autorespond RESPONSE

Response to automatically provide for all prompts (NOT RECOMMENDED)

Output options:

--loglevel LEVEL

How much output will be printed for what program is doing, one of debug/info/warning/error/critical

--json

Print output in JSON format

--csv

Print output in CSV format