The Let’s Encrypt Client presently only runs on Unix-ish OSes that include
Python 2.6 or 2.7; Python 3.x support will hopefully be added in the future. The
client requires root access in order to write to /etc/letsencrypt
,
/var/log/letsencrypt
, /var/lib/letsencrypt
; to bind to ports 80 and 443
(if you use the standalone
plugin) and to read and modify webserver
configurations (if you use the apache
or nginx
plugins). If none of
these apply to you, it is theoretically possible to run without root privileges,
but for most users who want to avoid running an ACME client as root, either
letsencrypt-nosudo or
simp_le are more appropriate choices.
The Apache plugin currently requires OS with augeas version 1.0; currently it supports modern OSes based on Debian, Fedora, SUSE, Gentoo and Darwin.
The Certbot client uses a number of different “commands” (also referred
to, equivalently, as “subcommands”) to request specific actions such as
obtaining, renewing, or revoking certificates. Some of the most important
and most commonly-used commands will be discussed throughout this
document; an exhaustive list also appears near the end of the document.
=======
Certbot is packaged for many common operating systems and web servers. Check whether
certbot
(or letsencrypt
) is packaged for your web server’s OS by visiting
certbot.eff.org, where you will also find the correct installation instructions for
your system.
Note
Unless you have very specific requirements, we kindly suggest that you use the Certbot packages provided by your package manager (see certbot.eff.org). If such packages are not available, we recommend using certbot-auto
, which automates the process of installing Certbot on your system.
The certbot
script on your web server might be named letsencrypt
if your system uses an older package, or certbot-auto
if you used an alternate installation method. Throughout the docs, whenever you see certbot
, swap in the correct name as needed.
If you are offline or your operating system doesn’t provide a package, you can use
an alternate method fo install certbot
.
The certbot-auto
wrapper script installs Certbot, obtaining some dependencies
from your web server OS and putting others in a python virtual environment. You can
download and run it as follows:
user@webserver:~$ wget https://dl.eff.org/certbot-auto
user@webserver:~$ chmod a+x ./certbot-auto
user@webserver:~$ ./certbot-auto --help
Hint
The certbot-auto download is protected by HTTPS, which is pretty good, but if you’d like to
double check the integrity of the certbot-auto
script, you can use these steps for verification before running it:
user@server:~$ wget -N https://dl.eff.org/certbot-auto.asc
user@server:~$ gpg2 --recv-key A2CFB51FA275A7286234E7B24D17C995CD9775F2
user@server:~$ gpg2 --trusted-key 4D17C995CD9775F2 --verify certbot-auto.asc certbot-auto
The certbot-auto
command updates to the latest client release automatically.
Since certbot-auto
is a wrapper to certbot
, it accepts exactly
the same command line flags and arguments. For more information, see
Certbot command-line options.
Docker is an amazingly simple and quick way to obtain a certificate. However, this mode of operation is unable to install certificates or configure your webserver, because our installer plugins cannot reach your webserver from inside the Docker container.
Most users should use the operating system packages (see instructions at
certbot.eff.org) or, as a fallback, certbot-auto
. You should only
use Docker if you are sure you know what you are doing and have a
good reason to do so.
You should definitely read the Where are my certificates? section, in order to know how to manage the certs manually. Our ciphersuites page provides some information about recommended ciphersuites. If none of these make much sense to you, you should definitely use the certbot-auto method, which enables you to use installer plugins that cover both of those hard topics.
If you’re still not convinced and have decided to use this method, from the server that the domain you’re requesting a cert for resolves to, install Docker, then issue the following command:
sudo docker run -it --rm -p 443:443 -p 80:80 --name certbot \
-v "/etc/letsencrypt:/etc/letsencrypt" \
-v "/var/lib/letsencrypt:/var/lib/letsencrypt" \
quay.io/letsencrypt/letsencrypt:latest certonly
Running Certbot with the certonly
command will obtain a certificate and place it in the directory
/etc/letsencrypt/live
on your system. Because Certonly cannot install the certificate from
within Docker, you must install the certificate manually according to the procedure
recommended by the provider of your webserver.
For more information about the layout
of the /etc/letsencrypt
directory, see Where are my certificates?.
FreeBSD
Port:
cd /usr/ports/security/py-certbot && make install clean
Package:
pkg install py27-certbot
OpenBSD
Port:
cd /usr/ports/security/letsencrypt/client && make install clean
Package:
pkg_add letsencrypt
Arch Linux
sudo pacman -S certbot
Debian
If you run Debian Stretch or Debian Sid, you can install certbot packages.
sudo apt-get update
sudo apt-get install certbot python-certbot-apache
If you don’t want to use the Apache plugin, you can omit the
python-certbot-apache
package.
Packages exist for Debian Jessie via backports. First you’ll have to follow the instructions at http://backports.debian.org/Instructions/ to enable the Jessie backports repo, if you have not already done so. Then run:
sudo apt-get install letsencrypt python-letsencrypt-apache -t jessie-backports
Fedora
sudo dnf install letsencrypt
Gentoo
The official Certbot client is available in Gentoo Portage. If you want to use the Apache plugin, it has to be installed separately:
emerge -av app-crypt/letsencrypt
emerge -av app-crypt/letsencrypt-apache
Currently, only the Apache plugin is included in Portage. However, if you Warning! You can use Layman to add the mrueg overlay which does include a package for the Certbot Nginx plugin, however, this plugin is known to be buggy and should only be used with caution after creating a backup up your Nginx configuration. We strongly recommend you use the app-crypt/letsencrypt package instead until the Nginx plugin is ready.
emerge -av app-portage/layman
layman -S
layman -a mrueg
emerge -av app-crypt/letsencrypt-nginx
When using the Apache plugin, you will run into a “cannot find a cert or key
directive” error if you’re sporting the default Gentoo httpd.conf
.
You can fix this by commenting out two lines in /etc/apache2/httpd.conf
as follows:
Change
<IfDefine SSL>
LoadModule ssl_module modules/mod_ssl.so
</IfDefine>
to
#<IfDefine SSL>
LoadModule ssl_module modules/mod_ssl.so
#</IfDefine>
For the time being, this is the only way for the Apache plugin to recognise the appropriate directives when installing the certificate. Note: this change is not required for the other plugins.
Other Operating Systems
OS packaging is an ongoing effort. If you’d like to package Certbot for your distribution of choice please have a look at the Packaging Guide.
Installation from source is only supported for developers and the whole process is described in the Developer Guide.
Warning
Please do not use python setup.py install
or
python pip install .
. Please do not attempt the
installation commands as superuser/root and/or without virtual
environment, e.g. sudo python setup.py install
, sudo pip
install
, sudo ./venv/bin/...
. These modes of operation might
corrupt your operating system and are not supported by the
Certbot team!
The Certbot client supports a number of different “plugins” that can be used to obtain and/or install certificates.
Plugins that can obtain a cert are called “authenticators” and can be used with
the “certonly” command. This will carry out the steps needed to validate that you
control the domain(s) you are requesting a cert for, obtain a cert for the specified
domain(s), and place it in the /etc/letsencrypt
directory on your
machine - without editing any of your server’s configuration files to serve the
obtained certificate. If you specify multiple domains to authenticate, they will
all be listed in a single certificate. To obtain multiple seperate certificates
you will need to run Certbot multiple times.
Plugins that can install a cert are called “installers” and can be used with the “install” command. These plugins can modify your webserver’s configuration to serve your website over HTTPS using certificates obtained by certbot.
Plugins that do both can be used with the “certbot run” command, which is the default when no command is specified. The “run” subcommand can also be used to specify a combination of distinct authenticator and installer plugins.
Plugin |
Auth |
Inst |
Notes |
Challenge types (and port) |
---|---|---|---|---|
Y |
Y |
Automates obtaining and installing a cert with Apache 2.4 on
Debian-based distributions with
libaugeas0 1.0+. |
tls-sni-01 (443) |
|
Y |
N |
Obtains a cert by writing to the webroot directory of an
already running webserver.
|
http-01 (80) |
|
Y |
N |
Uses a “standalone” webserver to obtain a cert. Requires
port 80 or 443 to be available. This is useful on systems
with no webserver, or when direct integration with the local
webserver is not supported or not desired.
|
http-01 (80) or tls-sni-01 (443) |
|
Y |
N |
Helps you obtain a cert by giving you instructions to perform
domain validation yourself.
|
||
Y |
Y |
Very experimental and not included in certbot-auto.
|
tls-sni-01 (443) |
Under the hood, plugins use one of several ACME protocol “Challenges” to
prove you control a domain. The options are http-01 (which uses port 80),
tls-sni-01 (port 443) and dns-01 (requring configuration of a DNS server on
port 53, thought that’s often not the same machine as your webserver). A few
plugins support more than one challenge type, in which case you can choose one
with --preferred-challenges
.
There are also many third-party-plugins available. Below we describe in more detail the circumstances in which each plugin can be used, and how to use it.
The Apache plugin currently requires OS with augeas version 1.0; currently it
supports
modern OSes based on Debian, Fedora, SUSE, Gentoo and Darwin.
This automates both obtaining and installing certs on an Apache
webserver. To specify this plugin on the command line, simply include
--apache
.
If you’re running a local webserver for which you have the ability
to modify the content being served, and you’d prefer not to stop the
webserver during the certificate issuance process, you can use the webroot
plugin to obtain a cert by including certonly
and --webroot
on
the command line. In addition, you’ll need to specify --webroot-path
or -w
with the top-level directory (“web root”) containing the files
served by your webserver. For example, --webroot-path /var/www/html
or --webroot-path /usr/share/nginx/html
are two common webroot paths.
If you’re getting a certificate for many domains at once, the plugin
needs to know where each domain’s files are served from, which could
potentially be a separate directory for each domain. When requesting a
certificate for multiple domains, each domain will use the most recently
specified --webroot-path
. So, for instance,
certbot certonly --webroot -w /var/www/example/ -d www.example.com -d example.com -w /var/www/other -d other.example.net -d another.other.example.net
would obtain a single certificate for all of those names, using the
/var/www/example
webroot directory for the first two, and
/var/www/other
for the second two.
The webroot plugin works by creating a temporary file for each of your requested
domains in ${webroot-path}/.well-known/acme-challenge
. Then the Let’s Encrypt
validation server makes HTTP requests to validate that the DNS for each
requested domain resolves to the server running certbot. An example request
made to your web server would look like:
66.133.109.36 - - [05/Jan/2016:20:11:24 -0500] "GET /.well-known/acme-challenge/HGr8U1IeTW4kY_Z6UIyaakzOkyQgPr_7ArlLgtZE8SX HTTP/1.1" 200 87 "-" "Mozilla/5.0 (compatible; Let's Encrypt validation server; +https://www.letsencrypt.org)"
Note that to use the webroot plugin, your server must be configured to serve
files from hidden directories. If /.well-known
is treated specially by
your webserver configuration, you might need to modify the configuration
to ensure that files inside /.well-known/acme-challenge
are served by
the webserver.
To obtain a cert using a “standalone” webserver, you can use the
standalone plugin by including certonly
and --standalone
on the command line. This plugin needs to bind to port 80 or 443 in
order to perform domain validation, so you may need to stop your
existing webserver. To control which port the plugin uses, include
one of the options shown below on the command line.
--standalone-supported-challenges http-01
to use port 80
--standalone-supported-challenges tls-sni-01
to use port 443
The standalone plugin does not rely on any other server software running on the machine where you obtain the certificate. It must still be possible for that machine to accept inbound connections from the Internet on the specified port using each requested domain name.
If you’d like to obtain a cert running certbot
on a machine
other than your target webserver or perform the steps for domain
validation yourself, you can use the manual plugin. While hidden from
the UI, you can use the plugin to obtain a cert by specifying
certonly
and --manual
on the command line. This requires you
to copy and paste commands into another terminal session, which may
be on a different computer.
In the future, if you’re running Nginx you will hopefully be able to use this
plugin to automatically obtain and install your certificate. The Nginx plugin is
still experimental, however, and is not installed with certbot-auto. If
installed, you can select this plugin on the command line by including
--nginx
.
There are also a number of third-party plugins for the client, provided by other developers. Many are beta/experimental, but some are already in widespread use:
Plugin |
Auth |
Inst |
Notes |
---|---|---|---|
Y |
Y |
Integration with the Plesk web hosting tool |
|
Y |
Y |
Integration with the HAProxy load balancer |
|
Y |
Y |
Integration with Amazon CloudFront distribution of S3 buckets |
|
Y |
Y |
Integration with Gandi’s hosting products and API |
|
Y |
N |
Obtain certs via a Varnish server |
|
Y |
N |
A plugin for convenient scripting (See also ticket 2782) |
|
N |
Y |
Deploy certs to Icecast 2 streaming media servers |
|
N |
Y |
Install certs in pritunl distributed OpenVPN servers |
|
N |
Y |
Install certs in Proxmox Virtualization servers |
|
N |
Y |
STARTTLS Everywhere is becoming a Certbot Postfix/Exim plugin |
If you’re interested, you can also write your own plugin.
Running Certbot with the certonly
or run
commands always requests
the creation of a single new certificate, even if you already have an
existing certificate with some of the same domain names. The --force-renewal
,
--duplicate
, and --expand
options control Certbot’s behavior in this case.
If you don’t specify a requested behavior, Certbot may ask you what you intended.
--force-renewal
tells Certbot to request a new certificate
with the same domains as an existing certificate. (Each and every domain
must be explicitly specified via -d
.) If successful, this certificate
will be saved alongside the earlier one and symbolic links (the “live
”
reference) will be updated to point to the new certificate. This is a
valid method of explicitly requesting the renewal of a specific individual
certificate.
--duplicate
tells Certbot to create a separate, unrelated certificate
with the same domains as an existing certificate. This certificate will
be saved completely separately from the prior one. Most users probably
do not want this behavior.
--expand
tells Certbot to update an existing certificate with a new
certificate that contains all of the old domains and one or more additional
new domains.
--allow-subset-of-names
tells Certbot to continue with cert generation if
only some of the specified domain authorazations can be obtained. This may
be useful if some domains specified in a certificate no longer point at this
system.
Whenever you obtain a new certificate in any of these ways, the new certificate exists alongside any previously-obtained certificates, whether or not the previous certificates have expired. The generation of a new certificate counts against several rate limits that are intended to prevent abuse of the ACME protocol, as described here.
Certbot also provides a renew
command. This command examines all existing
certificates to determine whether or not each is near expiry. For any existing
certificate that is near expiry, certbot renew
will attempt to obtain a
new certificate for the same domains. Unlike certonly
, renew
acts on
multiple certificates and always takes into account whether each one is near
expiry. Because of this, renew
is suitable (and designed) for automated use,
to allow your system to automatically renew each certificate when appropriate.
Since renew
will only renew certificates that are near expiry it can be
run as frequently as you want - since it will usually take no action.
Typically, certbot renew
runs a reduced risk of rate-limit problems
because it renews certificates only when necessary, and because some of
the Let’s Encrypt CA’s rate limit policies treat the issuance of a new
certificate under these circumstances more generously. More details about
the use of certbot renew
are provided below.
Note
Let’s Encrypt CA issues short-lived certificates (90 days). Make sure you renew the certificates at least once in 3 months.
The certbot
client now supports a renew
action to check
all installed certificates for impending expiry and attempt to renew
them. The simplest form is simply
certbot renew
This will attempt to renew any previously-obtained certificates that expire in less than 30 days. The same plugin and options that were used at the time the certificate was originally issued will be used for the renewal attempt, unless you specify other plugins or options.
You can also specify hooks to be run before or after a certificate is renewed. For example, if you have only a single cert and you obtained it using the standalone plugin, it will be used by default when renewing. In that case you may want to use a command like this to renew your certificate.
certbot renew --pre-hook "service nginx stop" --post-hook "service nginx start"
This will stop Nginx so standalone can bind to the necessary ports and
then restart Nginx after the plugin is finished. The hooks will only be
run if a certificate is due for renewal, so you can run this command
frequently without unnecessarily stopping your webserver. More
information about renewal hooks can be found by running
certbot --help renew
.
If you’re sure that this command executes successfully without human
intervention, you can add the command to crontab
(since certificates
are only renewed when they’re determined to be near expiry, the command
can run on a regular basis, like every week or every day). In that case,
you are likely to want to use the -q
or --quiet
quiet flag to
silence all output except errors.
If you are manually renewing all of your certificates, the
--force-renewal
flag may be helpful; it causes the expiration time of
the certificate(s) to be ignored when considering renewal, and attempts to
renew each and every installed certificate regardless of its age. (This
form is not appropriate to run daily because each certificate will be
renewed every day, which will quickly run into the certificate authority
rate limit.)
Note that options provided to certbot renew
will apply to
every certificate for which renewal is attempted; for example,
certbot renew --rsa-key-size 4096
would try to replace every
near-expiry certificate with an equivalent certificate using a 4096-bit
RSA public key. If a certificate is successfully renewed using
specified options, those options will be saved and used for future
renewals of that certificate.
An alternative form that provides for more fine-grained control over the
renewal process (while renewing specified certificates one at a time),
is certbot certonly
with the complete set of subject domains of
a specific certificate specified via -d flags. You may also want to
include the -n
or --noninteractive
flag to prevent blocking on
user input (which is useful when running the command from cron).
certbot certonly -n -d example.com -d www.example.com
(All of the domains covered by the certificate must be specified in
this case in order to renew and replace the old certificate rather
than obtaining a new one; don’t forget any www. domains! Specifying
a subset of the domains creates a new, separate certificate containing
only those domains, rather than replacing the original certificate.)
When run with a set of domains corresponding to an existing certificate,
the certonly
command attempts to renew that one individual certificate.
Please note that the CA will send notification emails to the address you provide if you do not renew certificates that are about to expire.
Certbot is working hard on improving the renewal process, and we apologize for any inconveniences you encounter in integrating these commands into your individual environment.
Certbot supports a lot of command line options. Here’s the full list, from
certbot --help all
:
usage:
certbot [SUBCOMMAND] [options] [-d domain] [-d domain] ...
Certbot can obtain and install HTTPS/TLS/SSL certificates. By default,
it will attempt to use a webserver both for obtaining and installing the
cert. Major SUBCOMMANDS are:
(default) run Obtain & install a cert in your current webserver
certonly Obtain cert, but do not install it (aka "auth")
install Install a previously obtained cert in a server
renew Renew previously obtained certs that are near expiry
revoke Revoke a previously obtained certificate
register Perform tasks related to registering with the CA
rollback Rollback server configuration changes made during install
config_changes Show changes made to server config during installation
plugins Display information about installed plugins
optional arguments:
-h, --help show this help message and exit
-c CONFIG_FILE, --config CONFIG_FILE
config file path (default: None)
-v, --verbose This flag can be used multiple times to incrementally
increase the verbosity of output, e.g. -vvv. (default:
-2)
-t, --text Use the text output instead of the curses UI.
(default: False)
-n, --non-interactive, --noninteractive
Run without ever asking for user input. This may
require additional command line flags; the client will
try to explain which ones are required if it finds one
missing (default: False)
--dialog Run using interactive dialog menus (default: False)
-d DOMAIN, --domains DOMAIN, --domain DOMAIN
Domain names to apply. For multiple domains you can
use multiple -d flags or enter a comma separated list
of domains as a parameter. (default: [])
--dry-run Perform a test run of the client, obtaining test
(invalid) certs but not saving them to disk. This can
currently only be used with the 'certonly' and 'renew'
subcommands. Note: Although --dry-run tries to avoid
making any persistent changes on a system, it is not
completely side-effect free: if used with webserver
authenticator plugins like apache and nginx, it makes
and then reverts temporary config changes in order to
obtain test certs, and reloads webservers to deploy
and then roll back those changes. It also calls --pre-
hook and --post-hook commands if they are defined
because they may be necessary to accurately simulate
renewal. --renew-hook commands are not called.
(default: False)
--register-unsafely-without-email
Specifying this flag enables registering an account
with no email address. This is strongly discouraged,
because in the event of key loss or account compromise
you will irrevocably lose access to your account. You
will also be unable to receive notice about impending
expiration or revocation of your certificates. Updates
to the Subscriber Agreement will still affect you, and
will be effective 14 days after posting an update to
the web site. (default: False)
--update-registration
With the register verb, indicates that details
associated with an existing registration, such as the
e-mail address, should be updated, rather than
registering a new account. (default: False)
-m EMAIL, --email EMAIL
Email used for registration and recovery contact.
(default: None)
--preferred-challenges PREF_CHALLS
A sorted, comma delimited list of the preferred
challenge to use during authorization with the most
preferred challenge listed first (Eg, "dns" or "tls-
sni-01,http,dns"). Not all plugins support all
challenges. See
https://certbot.eff.org/docs/using.html#plugins for
details. ACME Challenges are versioned, but if you
pick "http" rather than "http-01", Certbot will select
the latest version automatically. (default: [])
--user-agent USER_AGENT
Set a custom user agent string for the client. User
agent strings allow the CA to collect high level
statistics about success rates by OS and plugin. If
you wish to hide your server OS version from the Let's
Encrypt server, set this to "". (default: None)
automation:
Arguments for automating execution & other tweaks
--keep-until-expiring, --keep, --reinstall
If the requested cert matches an existing cert, always
keep the existing one until it is due for renewal (for
the 'run' subcommand this means reinstall the existing
cert) (default: False)
--expand If an existing cert covers some subset of the
requested names, always expand and replace it with the
additional names. (default: False)
--version show program's version number and exit
--force-renewal, --renew-by-default
If a certificate already exists for the requested
domains, renew it now, regardless of whether it is
near expiry. (Often --keep-until-expiring is more
appropriate). Also implies --expand. (default: False)
--allow-subset-of-names
When performing domain validation, do not consider it
a failure if authorizations can not be obtained for a
strict subset of the requested domains. This may be
useful for allowing renewals for multiple domains to
succeed even if some domains no longer point at this
system. This option cannot be used with --csr.
(default: False)
--agree-tos Agree to the ACME Subscriber Agreement (default:
False)
--account ACCOUNT_ID Account ID to use (default: None)
--duplicate Allow making a certificate lineage that duplicates an
existing one (both can be renewed in parallel)
(default: False)
--os-packages-only (certbot-auto only) install OS package dependencies
and then stop (default: False)
--no-self-upgrade (certbot-auto only) prevent the certbot-auto script
from upgrading itself to newer released versions
(default: False)
-q, --quiet Silence all output except errors. Useful for
automation via cron. Implies --non-interactive.
(default: False)
security:
Security parameters & server settings
--rsa-key-size N Size of the RSA key. (default: 2048)
--must-staple Adds the OCSP Must Staple extension to the
certificate. Autoconfigures OCSP Stapling for
supported setups (Apache version >= 2.3.3 ). (default:
False)
--redirect Automatically redirect all HTTP traffic to HTTPS for
the newly authenticated vhost. (default: None)
--no-redirect Do not automatically redirect all HTTP traffic to
HTTPS for the newly authenticated vhost. (default:
None)
--hsts Add the Strict-Transport-Security header to every HTTP
response. Forcing browser to always use SSL for the
domain. Defends against SSL Stripping. (default:
False)
--no-hsts Do not automatically add the Strict-Transport-Security
header to every HTTP response. (default: False)
--uir Add the "Content-Security-Policy: upgrade-insecure-
requests" header to every HTTP response. Forcing the
browser to use https:// for every http:// resource.
(default: None)
--no-uir Do not automatically set the "Content-Security-Policy:
upgrade-insecure-requests" header to every HTTP
response. (default: None)
--staple-ocsp Enables OCSP Stapling. A valid OCSP response is
stapled to the certificate that the server offers
during TLS. (default: None)
--no-staple-ocsp Do not automatically enable OCSP Stapling. (default:
None)
--strict-permissions Require that all configuration files are owned by the
current user; only needed if your config is somewhere
unsafe like /tmp/ (default: False)
testing:
The following flags are meant for testing purposes only! Do NOT change
them, unless you really know what you're doing!
--test-cert, --staging
Use the staging server to obtain test (invalid) certs;
equivalent to --server https://acme-
staging.api.letsencrypt.org/directory (default: False)
--debug Show tracebacks in case of errors, and allow certbot-
auto execution on experimental platforms (default:
False)
--no-verify-ssl Disable verification of the ACME server's certificate.
(default: False)
--break-my-certs Be willing to replace or renew valid certs with
invalid (testing/staging) certs (default: False)
renew:
The 'renew' subcommand will attempt to renew all certificates (or more
precisely, certificate lineages) you have previously obtained if they are
close to expiry, and print a summary of the results. By default, 'renew'
will reuse the options used to create obtain or most recently successfully
renew each certificate lineage. You can try it with `--dry-run` first. For
more fine-grained control, you can renew individual lineages with the
`certonly` subcommand. Hooks are available to run commands before and
after renewal; see https://certbot.eff.org/docs/using.html#renewal for
more information on these.
--pre-hook PRE_HOOK Command to be run in a shell before obtaining any
certificates. Intended primarily for renewal, where it
can be used to temporarily shut down a webserver that
might conflict with the standalone plugin. This will
only be called if a certificate is actually to be
obtained/renewed. (default: None)
--post-hook POST_HOOK
Command to be run in a shell after attempting to
obtain/renew certificates. Can be used to deploy
renewed certificates, or to restart any servers that
were stopped by --pre-hook. This is only run if an
attempt was made to obtain/renew a certificate.
(default: None)
--renew-hook RENEW_HOOK
Command to be run in a shell once for each
successfully renewed certificate. For this command,
the shell variable $RENEWED_LINEAGE will point to the
config live subdirectory containing the new certs and
keys; the shell variable $RENEWED_DOMAINS will contain
a space-delimited list of renewed cert domains
(default: None)
--disable-hook-validation
Ordinarily the commands specified for --pre-hook
/--post-hook/--renew-hook will be checked for
validity, to see if the programs being run are in the
$PATH, so that mistakes can be caught early, even when
the hooks aren't being run just yet. The validation is
rather simplistic and fails if you use more advanced
shell constructs, so you can use this switch to
disable it. (default: True)
certonly:
Options for modifying how a cert is obtained
--tls-sni-01-port TLS_SNI_01_PORT
Port used during tls-sni-01 challenge. This only
affects the port Certbot listens on. A conforming ACME
server will still attempt to connect on port 443.
(default: 443)
--http-01-port HTTP01_PORT
Port used in the http-01 challenge.This only affects
the port Certbot listens on. A conforming ACME server
will still attempt to connect on port 80. (default:
80)
--csr CSR Path to a Certificate Signing Request (CSR) in DER
format; note that the .csr file *must* contain a
Subject Alternative Name field for each domain you
want certified. Currently --csr only works with the
'certonly' subcommand' (default: None)
install:
Options for modifying how a cert is deployed
revoke:
Options for revocation of certs
rollback:
Options for reverting config changes
--checkpoints N Revert configuration N number of checkpoints.
(default: 1)
plugins:
Options for the "plugins" subcommand
--init Initialize plugins. (default: False)
--prepare Initialize and prepare plugins. (default: False)
--authenticators Limit to authenticator plugins only. (default: None)
--installers Limit to installer plugins only. (default: None)
config_changes:
Options for showing a history of config changes
--num NUM How many past revisions you want to be displayed
(default: None)
paths:
Arguments changing execution paths & servers
--cert-path CERT_PATH
Path to where cert is saved (with auth --csr),
installed from or revoked. (default: None)
--key-path KEY_PATH Path to private key for cert installation or
revocation (if account key is missing) (default: None)
--fullchain-path FULLCHAIN_PATH
Accompanying path to a full certificate chain (cert
plus chain). (default: None)
--chain-path CHAIN_PATH
Accompanying path to a certificate chain. (default:
None)
--config-dir CONFIG_DIR
Configuration directory. (default: /etc/letsencrypt)
--work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt)
--logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt)
--server SERVER ACME Directory Resource URI. (default:
https://acme-v01.api.letsencrypt.org/directory)
plugins:
Plugin Selection: Certbot client supports an extensible plugins
architecture. See 'certbot plugins' for a list of all installed plugins
and their names. You can force a particular plugin by setting options
provided below. Running --help <plugin_name> will list flags specific to
that plugin.
-a AUTHENTICATOR, --authenticator AUTHENTICATOR
Authenticator plugin name. (default: None)
-i INSTALLER, --installer INSTALLER
Installer plugin name (also used to find domains).
(default: None)
--configurator CONFIGURATOR
Name of the plugin that is both an authenticator and
an installer. Should not be used together with
--authenticator or --installer. (default: None)
--apache Obtain and install certs using Apache (default: False)
--nginx Obtain and install certs using Nginx (default: False)
--standalone Obtain certs using a "standalone" webserver. (default:
False)
--manual Provide laborious manual instructions for obtaining a
cert (default: False)
--webroot Obtain certs by placing files in a webroot directory.
(default: False)
nginx:
Nginx Web Server plugin - Alpha
--nginx-server-root NGINX_SERVER_ROOT
Nginx server root directory. (default: /etc/nginx)
--nginx-ctl NGINX_CTL
Path to the 'nginx' binary, used for 'configtest' and
retrieving nginx version number. (default: nginx)
standalone:
Spin up a temporary webserver
manual:
Manually configure an HTTP server
--manual-test-mode Test mode. Executes the manual command in subprocess.
(default: False)
--manual-public-ip-logging-ok
Automatically allows public IP logging. (default:
False)
webroot:
Place files in webroot directory
--webroot-path WEBROOT_PATH, -w WEBROOT_PATH
public_html / webroot path. This can be specified
multiple times to handle different domains; each
domain will have the webroot path that preceded it.
For instance: `-w /var/www/example -d example.com -d
www.example.com -w /var/www/thing -d thing.net -d
m.thing.net` (default: [])
--webroot-map WEBROOT_MAP
JSON dictionary mapping domains to webroot paths; this
implies -d for each entry. You may need to escape this
from your shell. E.g.: --webroot-map
'{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}'
This option is merged with, but takes precedence over,
-w / -d entries. At present, if you put webroot-map in
a config file, it needs to be on a single line, like:
webroot-map = {"example.com":"/var/www"}. (default:
{})
apache:
Apache Web Server plugin - Beta
--apache-enmod APACHE_ENMOD
Path to the Apache 'a2enmod' binary. (default:
a2enmod)
--apache-dismod APACHE_DISMOD
Path to the Apache 'a2dismod' binary. (default:
a2dismod)
--apache-le-vhost-ext APACHE_LE_VHOST_EXT
SSL vhost configuration extension. (default: -le-
ssl.conf)
--apache-server-root APACHE_SERVER_ROOT
Apache server root directory. (default: /etc/apache2)
--apache-vhost-root APACHE_VHOST_ROOT
Apache server VirtualHost configuration root (default:
/etc/apache2/sites-available)
--apache-logs-root APACHE_LOGS_ROOT
Apache server logs directory (default:
/var/log/apache2)
--apache-challenge-location APACHE_CHALLENGE_LOCATION
Directory path for challenge configuration. (default:
/etc/apache2)
--apache-handle-modules APACHE_HANDLE_MODULES
Let installer handle enabling required modules for
you.(Only Ubuntu/Debian currently) (default: True)
--apache-handle-sites APACHE_HANDLE_SITES
Let installer handle enabling sites for you.(Only
Ubuntu/Debian currently) (default: True)
null:
Null Installer
All generated keys and issued certificates can be found in
/etc/letsencrypt/live/$domain
. Rather than copying, please point
your (web) server configuration directly to those files (or create
symlinks). During the renewal, /etc/letsencrypt/live
is updated
with the latest necessary files.
Note
/etc/letsencrypt/archive
and /etc/letsencrypt/keys
contain all previous keys and certificates, while
/etc/letsencrypt/live
symlinks to the latest versions.
The following files are available:
privkey.pem
Private key for the certificate.
Warning
This must be kept secret at all times! Never share it with anyone, including Certbot developers. You cannot put it into a safe, however - your server still needs to access this file in order for SSL/TLS to work.
This is what Apache needs for SSLCertificateKeyFile, and nginx for ssl_certificate_key.
cert.pem
Server certificate only.
This is what Apache < 2.4.8 needs for SSLCertificateFile.
chain.pem
All certificates that need to be served by the browser excluding server certificate, i.e. root and intermediate certificates only.
This is what Apache < 2.4.8 needs for SSLCertificateChainFile, and what nginx >= 1.3.7 needs for ssl_trusted_certificate.
fullchain.pem
All certificates, including server certificate. This is
concatenation of cert.pem
and chain.pem
.
This is what Apache >= 2.4.8 needs for SSLCertificateFile, and what nginx needs for ssl_certificate.
For both chain files, all certificates are ordered from root (primary certificate) towards leaf.
Please note, that you must use either chain.pem
or
fullchain.pem
. In case of webservers, using only cert.pem
,
will cause nasty errors served through the browsers!
Note
All files are PEM-encoded (as the filename suffix
suggests). If you need other format, such as DER or PFX, then you
could convert using openssl
. You can automate that with
--renew-hook
if you’re using automatic renewal.
It is possible to specify configuration file with
certbot-auto --config cli.ini
(or shorter -c cli.ini
). An
example configuration file is shown below:
# This is an example of the kind of things you can do in a configuration file.
# All flags used by the client can be configured here. Run Certbot with
# "--help" to learn more about the available options.
# Use a 4096 bit RSA key instead of 2048
rsa-key-size = 4096
# Uncomment and update to register with the specified e-mail address
# email = foo@example.com
# Uncomment and update to generate certificates for the specified
# domains.
# domains = example.com, www.example.com
# Uncomment to use a text interface instead of ncurses
# text = True
# Uncomment to use the standalone authenticator on port 443
# authenticator = standalone
# standalone-supported-challenges = tls-sni-01
# Uncomment to use the webroot authenticator. Replace webroot-path with the
# path to the public_html / webroot folder being served by your web server.
# authenticator = webroot
# webroot-path = /usr/share/nginx/html
By default, the following locations are searched:
/etc/letsencrypt/cli.ini
$XDG_CONFIG_HOME/letsencrypt/cli.ini
(or
~/.config/letsencrypt/cli.ini
if $XDG_CONFIG_HOME
is not
set).
If you’re having problems you can chat with us on IRC (#certbot @ OFTC) or at IRC (#letsencrypt @ freenode) or get support on the Let’s Encrypt forums.
If you find a bug in the software, please do report it in our issue tracker. Remember to give us as much information as possible:
copy and paste exact command line used and the output (though mind that the latter might include some personally identifiable information, including your email and domains)
copy and paste logs from /var/log/letsencrypt
(though mind they
also might contain personally identifiable information)
copy and paste certbot --version
output
your operating system, including specific version
specify which installation method you’ve chosen