ST DISCO-L475VG-IOT01A

System

Platform ST STM32: The STM32 family of 32-bit Flash MCUs based on the ARM Cortex-M processor is designed to offer new degrees of freedom to MCU users. It offers a 32-bit product range that combines very high performance, real-time capabilities, digital signal processing, and low-power, low-voltage operation, while maintaining full integration and ease of development.

Microcontroller

STM32L475VGT6

Frequency

80MHz

Flash

1MB

RAM

128KB

Vendor

ST

Configuration

Please use disco_l475vg_iot01a ID for board option in “platformio.ini” (Project Configuration File):

[env:disco_l475vg_iot01a]
platform = ststm32
board = disco_l475vg_iot01a

You can override default ST DISCO-L475VG-IOT01A settings per build environment using board_*** option, where *** is a JSON object path from board manifest disco_l475vg_iot01a.json. For example, board_build.mcu, board_build.f_cpu, etc.

[env:disco_l475vg_iot01a]
platform = ststm32
board = disco_l475vg_iot01a

; change microcontroller
board_build.mcu = stm32l475vgt6

; change MCU frequency
board_build.f_cpu = 80000000L

Uploading

ST DISCO-L475VG-IOT01A supports the next uploading protocols:

  • jlink

  • stlink

  • blackmagic

  • mbed

Default protocol is mbed

You can change upload protocol using upload_protocol option:

[env:disco_l475vg_iot01a]
platform = ststm32
board = disco_l475vg_iot01a

upload_protocol = mbed

Debugging

PIO Unified Debugger - “1-click” solution for debugging with a zero configuration.

Warning

You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions and configuration information.

You can switch between debugging Tools & Debug Probes using debug_tool option in “platformio.ini” (Project Configuration File).

ST DISCO-L475VG-IOT01A has on-board debug probe and IS READY for debugging. You don’t need to use/buy external debug probe.

Compatible Tools

On-board

Default

Black Magic Probe

J-LINK

ST-LINK

Yes

Yes

Frameworks

Name

Description

mbed

The mbed framework The mbed SDK has been designed to provide enough hardware abstraction to be intuitive and concise, yet powerful enough to build complex projects. It is built on the low-level ARM CMSIS APIs, allowing you to code down to the metal if needed. In addition to RTOS, USB and Networking libraries, a cookbook of hundreds of reusable peripheral and module libraries have been built on top of the SDK by the mbed Developer Community.

STM32Cube

STM32Cube embedded software libraries, including: The HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls; The Low-Layer (LL) APIs, a light-weight, optimized, expert oriented set of APIs designed for both performance and runtime efficiency.