STM32F103RE (64k RAM. 512k Flash)

System

Platform ST STM32: The STM32 family of 32-bit Flash MCUs based on the ARM Cortex-M processor is designed to offer new degrees of freedom to MCU users. It offers a 32-bit product range that combines very high performance, real-time capabilities, digital signal processing, and low-power, low-voltage operation, while maintaining full integration and ease of development.

Microcontroller

STM32F103RET6

Frequency

72MHz

Flash

512KB

RAM

64KB

Vendor

Generic

Configuration

Please use genericSTM32F103RE ID for board option in “platformio.ini” (Project Configuration File):

[env:genericSTM32F103RE]
platform = ststm32
board = genericSTM32F103RE

You can override default STM32F103RE (64k RAM. 512k Flash) settings per build environment using board_*** option, where *** is a JSON object path from board manifest genericSTM32F103RE.json. For example, board_build.mcu, board_build.f_cpu, etc.

[env:genericSTM32F103RE]
platform = ststm32
board = genericSTM32F103RE

; change microcontroller
board_build.mcu = stm32f103ret6

; change MCU frequency
board_build.f_cpu = 72000000L

Uploading

STM32F103RE (64k RAM. 512k Flash) supports the next uploading protocols:

  • jlink

  • stlink

  • blackmagic

  • serial

  • dfu

Default protocol is stlink

You can change upload protocol using upload_protocol option:

[env:genericSTM32F103RE]
platform = ststm32
board = genericSTM32F103RE

upload_protocol = stlink

Debugging

PIO Unified Debugger - “1-click” solution for debugging with a zero configuration.

Warning

You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions and configuration information.

You can switch between debugging Tools & Debug Probes using debug_tool option in “platformio.ini” (Project Configuration File).

STM32F103RE (64k RAM. 512k Flash) does not have on-board debug probe and IS NOT READY for debugging. You will need to use/buy one of external probe listed below.

Compatible Tools

On-board

Default

Black Magic Probe

Yes

J-LINK

ST-LINK

Frameworks

Name

Description

Arduino

Arduino Wiring-based Framework allows writing cross-platform software to control devices attached to a wide range of Arduino boards to create all kinds of creative coding, interactive objects, spaces or physical experiences.

libOpenCM3

The libOpenCM3 framework aims to create a free/libre/open-source firmware library for various ARM Cortex-M0(+)/M3/M4 microcontrollers, including ST STM32, Ti Tiva and Stellaris, NXP LPC 11xx, 13xx, 15xx, 17xx parts, Atmel SAM3, Energy Micro EFM32 and others.

STM32Cube

STM32Cube embedded software libraries, including: The HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls; The Low-Layer (LL) APIs, a light-weight, optimized, expert oriented set of APIs designed for both performance and runtime efficiency.