Publishing on crates.io

Once you've got a library that you'd like to share with the world, it's time to publish it on crates.io! Publishing a crate is when a specific version is uploaded to be hosted on crates.io.

Take care when publishing a crate, because a publish is permanent. The version can never be overwritten, and the code cannot be deleted. There is no limit to the number of versions which can be published, however.

Before your first publish

First things first, you’ll need an account on crates.io to acquire an API token. To do so, visit the home page and log in via a GitHub account (required for now). After this, visit your Account Settings page and run the cargo login command specified.

$ cargo login abcdefghijklmnopqrstuvwxyz012345

This command will inform Cargo of your API token and store it locally in your ~/.cargo/credentials.toml. Note that this token is a secret and should not be shared with anyone else. If it leaks for any reason, you should revoke it immediately.

Before publishing a new crate

Keep in mind that crate names on crates.io are allocated on a first-come-first- serve basis. Once a crate name is taken, it cannot be used for another crate.

Check out the metadata you can specify in Cargo.toml to ensure your crate can be discovered more easily! Before publishing, make sure you have filled out the following fields:

It would also be a good idea to include some keywords and categories, though they are not required.

If you are publishing a library, you may also want to consult the Rust API Guidelines.

Packaging a crate

The next step is to package up your crate and upload it to crates.io. For this we’ll use the cargo publish subcommand. This command performs the following steps:

  1. Perform some verification checks on your package.
  2. Compress your source code into a .crate file.
  3. Extract the .crate file into a temporary directory and verify that it compiles.
  4. Upload the .crate file to crates.io.
  5. The registry will perform some additional checks on the uploaded package before adding it.

It is recommended that you first run cargo publish --dry-run (or cargo package which is equivalent) to ensure there aren't any warnings or errors before publishing. This will perform the first three steps listed above.

$ cargo publish --dry-run

You can inspect the generated .crate file in the target/package directory. crates.io currently has a 10MB size limit on the .crate file. You may want to check the size of the .crate file to ensure you didn't accidentally package up large assets that are not required to build your package, such as test data, website documentation, or code generation. You can check which files are included with the following command:

$ cargo package --list

Cargo will automatically ignore files ignored by your version control system when packaging, but if you want to specify an extra set of files to ignore you can use the exclude key in the manifest:

[package]
# ...
exclude = [
    "public/assets/*",
    "videos/*",
]

If you’d rather explicitly list the files to include, Cargo also supports an include key, which if set, overrides the exclude key:

[package]
# ...
include = [
    "**/*.rs",
    "Cargo.toml",
]

Uploading the crate

When you are ready to publish, use the cargo publish command to upload to crates.io:

$ cargo publish

And that’s it, you’ve now published your first crate!

Publishing a new version of an existing crate

In order to release a new version, change the version value specified in your Cargo.toml manifest. Keep in mind the semver rules, and consult RFC 1105 for what constitutes a semver-breaking change. Then run cargo publish as described above to upload the new version.

Managing a crates.io-based crate

Management of crates is primarily done through the command line cargo tool rather than the crates.io web interface. For this, there are a few subcommands to manage a crate.

cargo yank

Occasions may arise where you publish a version of a crate that actually ends up being broken for one reason or another (syntax error, forgot to include a file, etc.). For situations such as this, Cargo supports a “yank” of a version of a crate.

$ cargo yank --vers 1.0.1
$ cargo yank --vers 1.0.1 --undo

A yank does not delete any code. This feature is not intended for deleting accidentally uploaded secrets, for example. If that happens, you must reset those secrets immediately.

The semantics of a yanked version are that no new dependencies can be created against that version, but all existing dependencies continue to work. One of the major goals of crates.io is to act as a permanent archive of crates that does not change over time, and allowing deletion of a version would go against this goal. Essentially a yank means that all packages with a Cargo.lock will not break, while any future Cargo.lock files generated will not list the yanked version.

cargo owner

A crate is often developed by more than one person, or the primary maintainer may change over time! The owner of a crate is the only person allowed to publish new versions of the crate, but an owner may designate additional owners.

$ cargo owner --add github-handle
$ cargo owner --remove github-handle
$ cargo owner --add github:rust-lang:owners
$ cargo owner --remove github:rust-lang:owners

The owner IDs given to these commands must be GitHub user names or GitHub teams.

If a user name is given to --add, that user is invited as a “named” owner, with full rights to the crate. In addition to being able to publish or yank versions of the crate, they have the ability to add or remove owners, including the owner that made them an owner. Needless to say, you shouldn’t make people you don’t fully trust into a named owner. In order to become a named owner, a user must have logged into crates.io previously.

If a team name is given to --add, that team is invited as a “team” owner, with restricted right to the crate. While they have permission to publish or yank versions of the crate, they do not have the ability to add or remove owners. In addition to being more convenient for managing groups of owners, teams are just a bit more secure against owners becoming malicious.

The syntax for teams is currently github:org:team (see examples above). In order to invite a team as an owner one must be a member of that team. No such restriction applies to removing a team as an owner.

GitHub permissions

Team membership is not something GitHub provides simple public access to, and it is likely for you to encounter the following message when working with them:

It looks like you don’t have permission to query a necessary property from GitHub to complete this request. You may need to re-authenticate on crates.io to grant permission to read GitHub org memberships. Just go to https://crates.io/login.

This is basically a catch-all for “you tried to query a team, and one of the five levels of membership access control denied this”. That is not an exaggeration. GitHub’s support for team access control is Enterprise Grade.

The most likely cause of this is simply that you last logged in before this feature was added. We originally requested no permissions from GitHub when authenticating users, because we didn’t actually ever use the user’s token for anything other than logging them in. However to query team membership on your behalf, we now require the read:org scope.

You are free to deny us this scope, and everything that worked before teams were introduced will keep working. However you will never be able to add a team as an owner, or publish a crate as a team owner. If you ever attempt to do this, you will get the error above. You may also see this error if you ever try to publish a crate that you don’t own at all, but otherwise happens to have a team.

If you ever change your mind, or just aren’t sure if crates.io has sufficient permission, you can always go to https://crates.io/login, which will prompt you for permission if crates.io doesn’t have all the scopes it would like to.

An additional barrier to querying GitHub is that the organization may be actively denying third party access. To check this, you can go to:

https://github.com/organizations/:org/settings/oauth_application_policy

where :org is the name of the organization (e.g., rust-lang). You may see something like:

Organization Access Control

Where you may choose to explicitly remove crates.io from your organization’s blacklist, or simply press the “Remove Restrictions” button to allow all third party applications to access this data.

Alternatively, when crates.io requested the read:org scope, you could have explicitly whitelisted crates.io querying the org in question by pressing the “Grant Access” button next to its name:

Authentication Access Control