| nbdkit-plugin(3) | NBDKIT | nbdkit-plugin(3) |
nbdkit-plugin - how to write nbdkit plugins
#define NBDKIT_API_VERSION 2
#include <nbdkit-plugin.h>
#define THREAD_MODEL NBDKIT_THREAD_MODEL_SERIALIZE_ALL_REQUESTS
static void *
myplugin_open (void)
{
/* create a handle ... */
return handle;
}
static struct nbdkit_plugin plugin = {
.name = "myplugin",
.open = myplugin_open,
.get_size = myplugin_get_size,
.pread = myplugin_pread,
.pwrite = myplugin_pwrite,
/* etc */
};
NBDKIT_REGISTER_PLUGIN(plugin)
Compile the plugin as a shared library:
gcc -fPIC -shared myplugin.c -o myplugin.so
and load it into nbdkit:
nbdkit [--args ...] ./myplugin.so [key=value ...]
When debugging, use the -fv options:
nbdkit -fv ./myplugin.so [key=value ...]
An nbdkit plugin is a new source device which can be served using the Network Block Device (NBD) protocol. This manual page describes how to create an nbdkit plugin in C.
To see example plugins: https://github.com/libguestfs/nbdkit/tree/master/plugins
To write plugins in other languages, see: nbdkit-cc-plugin(3), nbdkit-golang-plugin(3), nbdkit-lua-plugin(3), nbdkit-ocaml-plugin(3), nbdkit-perl-plugin(3), nbdkit-python-plugin(3), nbdkit-ruby-plugin(3), nbdkit-rust-plugin(3), nbdkit-sh-plugin(3), nbdkit-tcl-plugin(3) .
Plugins written in C have an ABI guarantee: a plugin compiled against an older version of nbdkit will still work correctly when loaded with a newer nbdkit. We also try (but cannot guarantee) to support plugins compiled against a newer version of nbdkit when loaded with an older nbdkit, although the plugin may have reduced functionality if it depends on features only provided by newer nbdkit.
For plugins written in C, we also provide an API guarantee: a plugin written against an older header will still compile unmodified with a newer nbdkit.
The API guarantee does not always apply to plugins written in other (non-C) languages which may have to adapt to changes when recompiled against a newer nbdkit.
Plugins must choose which API version they want to use, by defining NBDKIT_API_VERSION before including "<nbdkit-plugin.h>" (or any other nbdkit header).
If omitted, the default version is 1 for backwards-compatibility with nbdkit v1.1.26 and earlier; however, it is recommended that new plugins be written to the maximum version (currently 2) as it enables more features and better interaction with nbdkit filters.
The rest of this document only covers the version 2 interface. A newer nbdkit will always support plugins written in C which use any prior API version.
All plugins should start by including this header file (after optionally choosing an API version).
All plugins must define a thread model. See "Threads" below for details. It is generally safe to use:
#define THREAD_MODEL NBDKIT_THREAD_MODEL_SERIALIZE_ALL_REQUESTS
All plugins must define and register one "struct nbdkit_plugin", which contains the name of the plugin and pointers to callback functions, and use the "NBDKIT_REGISTER_PLUGIN(plugin)" macro:
static struct nbdkit_plugin plugin = {
.name = "myplugin",
.longname = "My Plugin",
.description = "This is my great plugin for nbdkit",
.open = myplugin_open,
.get_size = myplugin_get_size,
.pread = myplugin_pread,
.pwrite = myplugin_pwrite,
/* etc */
};
NBDKIT_REGISTER_PLUGIN(plugin)
The ".name" field is the name of the plugin.
The callbacks are described below (see "CALLBACKS"). Only ".name", ".open", ".get_size" and ".pread" are required. All other callbacks can be omitted, although typical plugins need to use more.
Callbacks are called in the following order over the lifecycle of the plugin:
┌──────────────────┐
│ load │
└─────────┬────────┘
│ configuration phase starts ─┐
┌─────────┴────────┐ ┆
│ config │ config is called once per ┆
└─────────┬────────┘↺ key=value on the command line ┆
┌─────────┴────────┐ ┆
│ config_complete │ ┆
└─────────┬────────┘ ┆
┌─────────┴────────┐ ┆
│ thread_model │ ┆
└─────────┬────────┘ configuration phase ends ─┘
┌─────────┴────────┐
│ get_ready │
└─────────┬────────┘
│ nbdkit forks into the background
┌─────────┴────────┐
│ after_fork │
└─────────┬────────┘
│ nbdkit starts serving clients
│
┌──────────┴─────────────┬─ ─ ─ ─ ─ ─ ─ ─ ─
┌──────┴─────┐ client #1 │
│ preconnect │ │
└──────┬─────┘ │
┌──────┴─────┐ │
│list_exports│ │
└──────┬─────┘ │
┌──────┴─────┐ │
│ open │ │
└──────┬─────┘ │
┌──────┴─────┐ NBD option │
│ can_write │ negotiation │
└──────┬─────┘ │
┌──────┴─────┐ ┌──────┴─────┐ client #2
│ get_size │ │ preconnect │
└──────┬─────┘ └──────┬─────┘
┌──────┴─────┐ data
│ pread │ serving
└──────┬─────┘↺ ...
┌──────┴─────┐
│ pwrite │
└──────┬─────┘↺ ┌──────┴─────┐
┌──────┴─────┐ │ close │
│ close │ └────────────┘
└────────────┘
│ before nbdkit exits
│
┌─────────┴────────┐
│ unload │
└──────────────────┘
Both are called after loading the plugin but before any connections are accepted.
Plugins should not create background threads here. Use ".after_fork" instead.
Because the server may have forked into the background, error messages and failures from ".after_fork" cannot be seen by the user unless they look through syslog. An error in ".after_fork" can appear to the user as if nbdkit “just died”. So in almost all cases it is better to use ".get_ready" instead of this callback, or to do as much preparation work as possible in ".get_ready" and only start background threads here.
The server doesn't always fork (eg. if the -f flag is used), but even so this callback will be called. If you want to find out if the server forked between ".get_ready" and ".after_fork" use getpid(2).
The following flags are defined by nbdkit, and used in various data serving callbacks as follows:
The following defines are valid as successful return values for ".can_fua":
The following defines are valid as successful return values for ".can_cache":
Each nbdkit plugin must declare its maximum thread safety model by defining the "THREAD_MODEL" macro. (This macro is used by "NBDKIT_REGISTER_PLUGIN"). Additionally, a plugin may implement the ".thread_model" callback, called right after ".config_complete" to make a runtime decision on which thread model to use. The nbdkit server chooses the most restrictive model between the plugin's "THREAD_MODEL", the ".thread_model" if present, any restrictions requested by filters, and any limitations imposed by the operating system.
In "nbdkit --dump-plugin PLUGIN" output, the "max_thread_model" line matches the "THREAD_MODEL" macro, and the "thread_model" line matches what the system finally settled on after applying all restrictions.
The possible settings for "THREAD_MODEL" are defined below.
Note this means only one client can connect to the server at any time. If a second client tries to connect it will block waiting for the first client to close the connection.
Multiple handles can be open at the same time, but requests are serialized so that for the plugin as a whole only one open/read/write/close (etc) request will be in progress at any time.
This is a useful setting if the library you are using is not thread-safe. However performance may not be good.
All the libraries you use must be thread-safe and reentrant, and any code that creates a file descriptor should atomically set "FD_CLOEXEC" if you do not want it accidentally leaked to another thread's child process. You may also need to provide mutexes for fields in your connection handle.
If none of the above thread models are suitable, use "NBDKIT_THREAD_MODEL_PARALLEL" and implement your own locking using "pthread_mutex_t" etc.
If there is an error in the plugin, the plugin should call "nbdkit_error" to report an error message; additionally, if the callback is involved in serving data, the plugin should call "nbdkit_set_error" to influence the error code that will be sent to the client. These two functions can be called in either order. Then, the callback should return the appropriate error indication, eg. "NULL" or "-1".
If the call to "nbdkit_set_error" is omitted while serving data, then the global variable "errno" may be used. For plugins which have ".errno_is_preserved != 0" the core code will use "errno". In plugins written in non-C languages, we usually cannot trust that "errno" will not be overwritten when returning from that language to C. In that case, either the plugin must call "nbdkit_set_error" or hard-coded "EIO" is used.
"nbdkit_error" has the following prototype and works like printf(3):
void nbdkit_error (const char *fs, ...); void nbdkit_verror (const char *fs, va_list args);
For convenience, "nbdkit_error" preserves the value of "errno", and also supports the glibc extension of a single %m in a format string expanding to "strerror(errno)", even on platforms that don't support that natively.
"nbdkit_set_error" can be called at any time, but only has an impact during callbacks for serving data, and only when the callback returns an indication of failure. It has the following prototype:
void nbdkit_set_error (int err);
const char *name;
This field (a string) is required, and must contain only ASCII alphanumeric characters or non-leading dashes, and be unique amongst all plugins.
const char *version;
Plugins may optionally set a version string which is displayed in help and debugging output.
const char *longname;
An optional free text name of the plugin. This field is used in error messages.
const char *description;
An optional multi-line description of the plugin.
void load (void);
This is called once just after the plugin is loaded into memory. You can use this to perform any global initialization needed by the plugin.
void unload (void);
This may be called once just before the plugin is unloaded from memory. Note that it's not guaranteed that ".unload" will always be called (eg. the server might be killed or segfault), so you should try to make the plugin as robust as possible by not requiring cleanup. See also "SHUTDOWN" below.
void dump_plugin (void);
This optional callback is called when the "nbdkit plugin --dump-plugin" command is used. It should print any additional informative "key=value" fields to stdout as needed. Prefixing the keys with the name of the plugin will avoid conflicts.
int config (const char *key, const char *value);
On the nbdkit command line, after the plugin filename, come an optional list of "key=value" arguments. These are passed to the plugin through this callback when the plugin is first loaded and before any connections are accepted.
This callback may be called zero or more times.
Both "key" and "value" parameters will be non-NULL. The strings are owned by nbdkit but will remain valid for the lifetime of the plugin, so the plugin does not need to copy them.
The key will be a non-empty string beginning with an ASCII alphabetic character ("A-Z" "a-z"). The rest of the key must contain only ASCII alphanumeric plus period, underscore or dash characters ("A-Z" "a-z" "0-9" "." "_" "-"). The value may be an arbitrary string, including an empty string.
The names of "key"s accepted by plugins is up to the plugin, but you should probably look at other plugins and follow the same conventions.
If the value is a relative path, then note that the server changes directory when it starts up. See "FILENAMES AND PATHS" above.
If "nbdkit_stdio_safe" returns 1, the value of the configuration parameter may be used to trigger reading additional data through stdin (such as a password or inline script).
If the ".config" callback is not provided by the plugin, and the user tries to specify any "key=value" arguments, then nbdkit will exit with an error.
If there is an error, ".config" should call "nbdkit_error" with an error message and return "-1".
const char *magic_config_key;
This optional string can be used to set a "magic" key used when parsing plugin parameters. It affects how "bare parameters" (those which do not contain an "=" character) are parsed on the command line.
If "magic_config_key != NULL" then any bare parameters are passed to the ".config" method as: "config (magic_config_key, argv[i]);".
If "magic_config_key" is not set then we behave as in nbdkit < 1.7: If the first parameter on the command line is bare then it is passed to the ".config" method as: "config ("script", value);". Any other bare parameters give errors.
int config_complete (void);
This optional callback is called after all the configuration has been passed to the plugin. It is a good place to do checks, for example that the user has passed the required parameters to the plugin.
If there is an error, ".config_complete" should call "nbdkit_error" with an error message and return "-1".
const char *config_help;
This optional multi-line help message should summarize any "key=value" parameters that it takes. It does not need to repeat what already appears in ".description".
If the plugin doesn't take any config parameters you should probably omit this.
int thread_model (void)
This optional callback is called after all the configuration has been passed to the plugin. It can be used to force a stricter thread model based on configuration, compared to "THREAD_MODEL". See "Threads" above for details. Attempts to request a looser (more parallel) model are silently ignored.
If there is an error, ".thread_model" should call "nbdkit_error" with an error message and return "-1".
int get_ready (void);
This optional callback is called before the server starts serving. It is called before the server forks or changes directory. It is ordinarily the last chance to do any global preparation that is needed to serve connections.
If there is an error, ".get_ready" should call "nbdkit_error" with an error message and return "-1".
int after_fork (void);
This optional callback is called before the server starts serving. It is called after the server forks and changes directory. If a plugin needs to create background threads (or uses an external library that creates threads) it should do so here, because background threads are killed by fork. However you should try to do as little as possible here because error reporting is difficult. See "Callback lifecycle" above.
If there is an error, ".after_fork" should call "nbdkit_error" with an error message and return "-1".
int preconnect (int readonly);
This optional callback is called when a TCP connection has been made to the server. This happens early, before NBD or TLS negotiation. If TLS authentication is required to access the server, then it has not been negotiated at this point.
For security reasons (to avoid denial of service attacks) this callback should be written to be as fast and take as few resources as possible. If you use this callback, only use it to do basic access control, such as checking "nbdkit_peer_name", "nbdkit_peer_pid", "nbdkit_peer_uid", "nbdkit_peer_gid" against a list of permitted source addresses (see "PEER NAME" and nbdkit-ip-filter(1)). It may be better to do access control outside the server, for example using TCP wrappers or a firewall.
The "readonly" flag informs the plugin that the server was started with the -r flag on the command line.
Returning 0 will allow the connection to continue. If there is an error or you want to deny the connection, call "nbdkit_error" with an error message and return "-1".
int list_exports (int readonly, int is_tls,
struct nbdkit_exports *exports);
This optional callback is called if the client tries to list the exports served by the plugin (using "NBD_OPT_LIST"). If the plugin does not supply this callback then the result of ".default_export" is advertised as the lone export. The NBD protocol defines "" as the default export, so this is suitable for plugins which ignore the export name and always serve the same content. See also "EXPORT NAME" below.
The "readonly" flag informs the plugin that the server was started with the -r flag on the command line, which is the same value passed to ".preconnect" and ".open". However, the NBD protocol does not yet have a way to let the client advertise an intent to be read-only even when the server allows writes, so this parameter may not be as useful as it appears.
The "is_tls" flag informs the plugin whether this listing was requested after the client has completed TLS negotiation. When running the server in a mode that permits but does not require TLS, be careful that any exports listed when "is_tls" is "false" do not leak unintended information.
The "exports" parameter is an opaque object for collecting the list of exports. Call "nbdkit_add_export" as needed to add specific exports to the list.
int nbdkit_add_export (struct nbdkit_export *exports,
const char *name, const char *description);
The "name" must be a non-NULL, UTF-8 string between 0 and 4096 bytes in length. Export names must be unique. "description" is an optional description of the export which some clients can display but which is otherwise unused (if you don't want a description, you can pass this parameter as "NULL"). The string(s) are copied into the exports list so you may free them immediately after calling this function. "nbdkit_add_export" returns 0 on success or "-1" on failure; on failure "nbdkit_error" has already been called, with "errno" set to a suitable value.
There are also situations where a plugin may wish to duplicate the nbdkit default behavior of supplying an export list containing only the result of ".default_export" when ".list_exports" is missing; this is most common in a language binding where it is not known at compile time whether the language script will be providing an implementation for ".list_exports", and is done by calling "nbdkit_use_default_export".
int nbdkit_use_default_export (struct nbdkit_export *exports);
"nbdkit_use_default_export" returns 0 on success or "-1" on failure; on failure "nbdkit_error" has already been called, with "errno" set to a suitable value.
The plugin may also leave the export list empty, by not calling either helper. Once the plugin is happy with the list contents, returning 0 will send the list of exports back to the client. If there is an error, ".list_exports" should call "nbdkit_error" with an error message and return "-1".
const char *default_export (int readonly, int is_tls);
This optional callback is called if the client tries to connect to the default export "", where the plugin provides a UTF-8 string between 0 and 4096 bytes. If the plugin does not supply this callback, the connection continues with the empty name; if the plugin returns a valid string, nbdkit behaves as if the client had passed that string instead of an empty name, and returns that name to clients that support it (see the "NBD_INFO_NAME" response to "NBD_OPT_GO"). Similarly, if the plugin does not supply a ".list_exports" callback, the result of this callback determines what export name to advertise to a client requesting an export list.
The "readonly" flag informs the plugin that the server was started with the -r flag on the command line, which is the same value passed to ".preconnect" and ".open". However, the NBD protocol does not yet have a way to let the client advertise an intent to be read-only even when the server allows writes, so this parameter may not be as useful as it appears.
The "is_tls" flag informs the plugin whether the canonical name for the default export is being requested after the client has completed TLS negotiation. When running the server in a mode that permits but does not require TLS, be careful that a default export name does not leak unintended information.
If the plugin returns "NULL" or an invalid string (such as longer than 4096 bytes), the client is not permitted to connect to the default export. However, this is not an error in the protocol, so it is not necessary to call "nbdkit_error".
void *open (int readonly);
This is called when a new client connects to the nbdkit server. The callback should allocate a handle and return it. This handle is passed back to other callbacks and could be freed in the ".close" callback.
Note that the handle is completely opaque to nbdkit, but it must not be NULL. If you don't need to use a handle, return "NBDKIT_HANDLE_NOT_NEEDED" which is a static non-NULL pointer.
The "readonly" flag informs the plugin that the server was started with the -r flag on the command line which forces connections to be read-only. Note that the plugin may additionally force the connection to be readonly (even if this flag is false) by returning false from the ".can_write" callback. So if your plugin can only serve read-only, you can ignore this parameter.
If the plugin wants to differentiate the content it serves based on client input, then this is the spot to use "nbdkit_export_name()" to determine which export the client requested. See also "EXPORT NAME" below.
This callback is called after the NBD handshake has completed; if the server requires TLS authentication, then that has occurred as well. But if the server is set up to have optional TLS authentication, you may check "nbdkit_is_tls" to learn whether the client has completed TLS authentication. When running the server in a mode that permits but does not require TLS, be careful that you do not allow unauthenticated clients to cause a denial of service against authentication.
If there is an error, ".open" should call "nbdkit_error" with an error message and return "NULL".
void close (void *handle);
This is called when the client closes the connection. It should clean up any per-connection resources.
Note there is no way in the NBD protocol to communicate close errors back to the client, for example if your plugin calls close(2) and you are checking for errors (as you should do). Therefore the best you can do is to log the error on the server. Well-behaved NBD clients should try to flush the connection before it is closed and check for errors, but obviously this is outside the scope of nbdkit.
int64_t get_size (void *handle);
This is called during the option negotiation phase of the protocol to get the size (in bytes) of the block device being exported.
The returned size must be ≥ 0. If there is an error, ".get_size" should call "nbdkit_error" with an error message and return "-1".
const char *export_description (void *handle);
This is called during the option negotiation phase only if the client specifically requested an export description (see the "NBD_INFO_DESCRIPTION" response to "NBD_OPT_GO"). Any description provided must be human-readable UTF-8, no longer than 4096 bytes. Ideally, this description should match any description set during ".list_exports", but that is not enforced.
If the plugin returns "NULL" or an invalid string (such as longer than 4096 bytes), or if this callback is omitted, no description is offered to the client. As this is not an error in the protocol, it is not necessary to call "nbdkit_error". If the callback will not be returning a compile-time constant string, you may find "nbdkit_strdup_intern" helpful for returning a value that avoids a memory leak.
int can_write (void *handle);
This is called during the option negotiation phase to find out if the handle supports writes.
If there is an error, ".can_write" should call "nbdkit_error" with an error message and return "-1".
This callback is not required. If omitted, then we return true iff a ".pwrite" callback has been defined.
int can_flush (void *handle);
This is called during the option negotiation phase to find out if the handle supports the flush-to-disk operation.
If there is an error, ".can_flush" should call "nbdkit_error" with an error message and return "-1".
This callback is not required. If omitted, then we return true iff a ".flush" callback has been defined.
int is_rotational (void *handle);
This is called during the option negotiation phase to find out if the backing disk is a rotational medium (like a traditional hard disk) or not (like an SSD). If true, this may cause the client to reorder requests to make them more efficient for a slow rotating disk.
If there is an error, ".is_rotational" should call "nbdkit_error" with an error message and return "-1".
This callback is not required. If omitted, then we return false.
int can_trim (void *handle);
This is called during the option negotiation phase to find out if the plugin supports the trim/discard operation for punching holes in the backing storage.
If there is an error, ".can_trim" should call "nbdkit_error" with an error message and return "-1".
This callback is not required. If omitted, then we return true iff a ".trim" callback has been defined.
int can_zero (void *handle);
This is called during the option negotiation phase to find out if the plugin wants the ".zero" callback to be utilized. Support for writing zeroes is still advertised to the client (unless the nbdkit-nozero-filter(1) is also used), so returning false merely serves as a way to avoid complicating the ".zero" callback to have to fail with "ENOTSUP" or "EOPNOTSUPP" on the connections where it will never be more efficient than using ".pwrite" up front.
If there is an error, ".can_zero" should call "nbdkit_error" with an error message and return "-1".
This callback is not required. If omitted, then for a normal zero request, nbdkit always tries ".zero" first if it is present, and gracefully falls back to ".pwrite" if ".zero" was absent or failed with "ENOTSUP" or "EOPNOTSUPP".
int can_fast_zero (void *handle);
This is called during the option negotiation phase to find out if the plugin wants to advertise support for fast zero requests. If this support is not advertised, a client cannot attempt fast zero requests, and has no way to tell if writing zeroes offers any speedups compared to using ".pwrite" (other than compressed network traffic). If support is advertised, then ".zero" will have "NBDKIT_FLAG_FAST_ZERO" set when the client has requested a fast zero, in which case the plugin must fail with "ENOTSUP" or "EOPNOTSUPP" up front if the request would not offer any benefits over ".pwrite". Advertising support for fast zero requests does not require that writing zeroes be fast, only that the result (whether success or failure) is fast, so this should be advertised when feasible.
If there is an error, ".can_fast_zero" should call "nbdkit_error" with an error message and return "-1".
This callback is not required. If omitted, then nbdkit returns true if ".zero" is absent or ".can_zero" returns false (in those cases, nbdkit fails all fast zero requests, as its fallback to ".pwrite" is not inherently faster), otherwise false (since it cannot be determined in advance if the plugin's ".zero" will properly honor the semantics of "NBDKIT_FLAG_FAST_ZERO").
int can_extents (void *handle);
This is called during the option negotiation phase to find out if the plugin supports detecting allocated (non-sparse) regions of the disk with the ".extents" callback.
If there is an error, ".can_extents" should call "nbdkit_error" with an error message and return "-1".
This callback is not required. If omitted, then we return true iff a ".extents" callback has been defined.
int can_fua (void *handle);
This is called during the option negotiation phase to find out if the plugin supports the Forced Unit Access (FUA) flag on write, zero, and trim requests. If this returns "NBDKIT_FUA_NONE", FUA support is not advertised to the client; if this returns "NBDKIT_FUA_EMULATE", the ".flush" callback must work (even if ".can_flush" returns false), and FUA support is emulated by calling ".flush" after any write operation; if this returns "NBDKIT_FUA_NATIVE", then the ".pwrite", ".zero", and ".trim" callbacks (if implemented) must handle the flag "NBDKIT_FLAG_FUA", by not returning until that action has landed in persistent storage.
If there is an error, ".can_fua" should call "nbdkit_error" with an error message and return "-1".
This callback is not required unless a plugin wants to specifically handle FUA requests. If omitted, nbdkit checks whether ".flush" exists, and behaves as if this function returns "NBDKIT_FUA_NONE" or "NBDKIT_FUA_EMULATE" as appropriate.
int can_multi_conn (void *handle);
This is called during the option negotiation phase to find out if the plugin is prepared to handle multiple connections from a single client. If the plugin sets this to true then a client may try to open multiple connections to the nbdkit server and spread requests across all connections to maximize parallelism. If the plugin sets it to false (which is the default) then well-behaved clients should only open a single connection, although we cannot control what clients do in practice.
Specifically it means that either the plugin does not cache requests at all. Or if it does cache them then the effects of a ".flush" request or setting "NBDKIT_FLAG_FUA" on a request must be visible across all connections to the plugin before the plugin replies to that request.
Properly working clients should send the same export name for each of these connections.
If you use Linux nbd-client(8) option -C num with num > 1 then Linux checks this flag and will refuse to connect if ".can_multi_conn" is false.
If there is an error, ".can_multi_conn" should call "nbdkit_error" with an error message and return "-1".
This callback is not required. If omitted, then we return false.
int can_cache (void *handle);
This is called during the option negotiation phase to find out if the plugin supports a cache operation. The nature of the caching is unspecified (including whether there are limits on how much can be cached at once, and whether writes to a cached region have write-through or write-back semantics), but the command exists to let clients issue a hint to the server that they will be accessing that region of the export.
If this returns "NBDKIT_CACHE_NONE", cache support is not advertised to the client; if this returns "NBDKIT_CACHE_EMULATE", caching is emulated by the server calling ".pread" and ignoring the results; if this returns "NBDKIT_CACHE_NATIVE", then the ".cache" callback will be used. If there is an error, ".can_cache" should call "nbdkit_error" with an error message and return "-1".
This callback is not required. If omitted, then we return "NBDKIT_CACHE_NONE" if the ".cache" callback is missing, or "NBDKIT_CACHE_NATIVE" if it is defined.
int pread (void *handle, void *buf, uint32_t count, uint64_t offset,
uint32_t flags);
During the data serving phase, nbdkit calls this callback to read data from the backing store. "count" bytes starting at "offset" in the backing store should be read and copied into "buf". nbdkit takes care of all bounds- and sanity-checking, so the plugin does not need to worry about that.
The parameter "flags" exists in case of future NBD protocol extensions; at this time, it will be 0 on input.
The callback must read the whole "count" bytes if it can. The NBD protocol doesn't allow partial reads (instead, these would be errors). If the whole "count" bytes was read, the callback should return 0 to indicate there was no error.
If there is an error (including a short read which couldn't be recovered from), ".pread" should call "nbdkit_error" with an error message, and "nbdkit_set_error" to record an appropriate error (unless "errno" is sufficient), then return "-1".
int pwrite (void *handle, const void *buf, uint32_t count, uint64_t offset,
uint32_t flags);
During the data serving phase, nbdkit calls this callback to write data to the backing store. "count" bytes starting at "offset" in the backing store should be written using the data in "buf". nbdkit takes care of all bounds- and sanity-checking, so the plugin does not need to worry about that.
This function will not be called if ".can_write" returned false. The parameter "flags" may include "NBDKIT_FLAG_FUA" on input based on the result of ".can_fua".
The callback must write the whole "count" bytes if it can. The NBD protocol doesn't allow partial writes (instead, these would be errors). If the whole "count" bytes was written successfully, the callback should return 0 to indicate there was no error.
If there is an error (including a short write which couldn't be recovered from), ".pwrite" should call "nbdkit_error" with an error message, and "nbdkit_set_error" to record an appropriate error (unless "errno" is sufficient), then return "-1".
int flush (void *handle, uint32_t flags);
During the data serving phase, this callback is used to fdatasync(2) the backing store, ie. to ensure it has been completely written to a permanent medium. If that is not possible then you can omit this callback.
This function will not be called directly by the client if ".can_flush" returned false; however, it may still be called by nbdkit if ".can_fua" returned "NBDKIT_FUA_EMULATE". The parameter "flags" exists in case of future NBD protocol extensions; at this time, it will be 0 on input.
If there is an error, ".flush" should call "nbdkit_error" with an error message, and "nbdkit_set_error" to record an appropriate error (unless "errno" is sufficient), then return "-1".
int trim (void *handle, uint32_t count, uint64_t offset, uint32_t flags);
During the data serving phase, this callback is used to "punch holes" in the backing store. If that is not possible then you can omit this callback.
This function will not be called if ".can_trim" returned false. The parameter "flags" may include "NBDKIT_FLAG_FUA" on input based on the result of ".can_fua".
If there is an error, ".trim" should call "nbdkit_error" with an error message, and "nbdkit_set_error" to record an appropriate error (unless "errno" is sufficient), then return "-1".
int zero (void *handle, uint32_t count, uint64_t offset, uint32_t flags);
During the data serving phase, this callback is used to write "count" bytes of zeroes at "offset" in the backing store.
This function will not be called if ".can_zero" returned false. On input, the parameter "flags" may include "NBDKIT_FLAG_MAY_TRIM" unconditionally, "NBDKIT_FLAG_FUA" based on the result of ".can_fua", and "NBDKIT_FLAG_FAST_ZERO" based on the result of ".can_fast_zero".
If "NBDKIT_FLAG_MAY_TRIM" is requested, the operation can punch a hole instead of writing actual zero bytes, but only if subsequent reads from the hole read as zeroes.
If "NBDKIT_FLAG_FAST_ZERO" is requested, the plugin must decide up front if the implementation is likely to be faster than a corresponding ".pwrite"; if not, then it must immediately fail with "ENOTSUP" or "EOPNOTSUPP" (whether by "nbdkit_set_error" or "errno") and preferably without modifying the exported image. It is acceptable to always fail a fast zero request (as a fast failure is better than attempting the write only to find out after the fact that it was not fast after all). Note that on Linux, support for "ioctl(BLKZEROOUT)" is insufficient for determining whether a zero request to a block device will be fast (because the kernel will perform a slow fallback when needed).
The callback must write the whole "count" bytes if it can. The NBD protocol doesn't allow partial writes (instead, these would be errors). If the whole "count" bytes was written successfully, the callback should return 0 to indicate there was no error.
If there is an error, ".zero" should call "nbdkit_error" with an error message, and "nbdkit_set_error" to record an appropriate error (unless "errno" is sufficient), then return "-1".
If this callback is omitted, or if it fails with "ENOTSUP" or "EOPNOTSUPP" (whether by "nbdkit_set_error" or "errno"), then ".pwrite" will be used as an automatic fallback except when the client requested a fast zero.
int extents (void *handle, uint32_t count, uint64_t offset,
uint32_t flags, struct nbdkit_extents *extents);
During the data serving phase, this callback is used to detect allocated, sparse and zeroed regions of the disk.
This function will not be called if ".can_extents" returned false. nbdkit's default behaviour in this case is to treat the whole virtual disk as if it was allocated. Also, this function will not be called by a client that does not request structured replies (the --no-sr option of nbdkit can be used to test behavior when ".extents" is unavailable to the client).
The callback should detect and return the list of extents overlapping the range "[offset...offset+count-1]". The "extents" parameter points to an opaque object which the callback should fill in by calling "nbdkit_add_extent". See "Extents list" below.
If there is an error, ".extents" should call "nbdkit_error" with an error message, and "nbdkit_set_error" to record an appropriate error (unless "errno" is sufficient), then return "-1".
Extents list
The plugin "extents" callback is passed an opaque pointer "struct nbdkit_extents *extents". This structure represents a list of filesystem extents describing which areas of the disk are allocated, which are sparse (“holes”), and, if supported, which are zeroes.
The "extents" callback should scan the disk starting at "offset" and call "nbdkit_add_extent" for each extent found.
Extents overlapping the range "[offset...offset+count-1]" should be returned if possible. However nbdkit ignores extents < offset so the plugin may, if it is easier to implement, return all extent information for the whole disk. The plugin may return extents beyond the end of the range. It may also return extent information for less than the whole range, but it must return at least one extent overlapping "offset".
The extents must be added in ascending order, and must be contiguous.
The "flags" parameter of the ".extents" callback may contain the flag "NBDKIT_FLAG_REQ_ONE". This means that the client is only requesting information about the extent overlapping "offset". The plugin may ignore this flag, or as an optimization it may return just a single extent for "offset".
int nbdkit_add_extent (struct nbdkit_extents *extents,
uint64_t offset, uint64_t length, uint32_t type);
Add an extent covering "[offset...offset+length-1]" of one of the following four types:
"nbdkit_add_extent" returns 0 on success or "-1" on failure. On failure "nbdkit_error" and/or "nbdkit_set_error" has already been called. "errno" will be set to a suitable value.
int cache (void *handle, uint32_t count, uint64_t offset, uint32_t flags);
During the data serving phase, this callback is used to give the plugin a hint that the client intends to make further accesses to the given region of the export. The nature of caching is not specified further by the NBD specification (for example, a server may place limits on how much may be cached at once, and there is no way to control if writes to a cached area have write-through or write-back semantics). In fact, the cache command can always fail and still be compliant, and success might not guarantee a performance gain. If this callback is omitted, then the results of ".can_cache" determine whether nbdkit will reject cache requests, treat them as instant success, or emulate caching by calling ".pread" over the same region and ignoring the results.
This function will not be called if ".can_cache" did not return "NBDKIT_CACHE_NATIVE". The parameter "flags" exists in case of future NBD protocol extensions; at this time, it will be 0 on input. A plugin must fail this function if "flags" includes an unrecognized flag, as that may indicate a requirement that the plugin comply must with a specific caching semantic.
If there is an error, ".cache" should call "nbdkit_error" with an error message, and "nbdkit_set_error" to record an appropriate error (unless "errno" is sufficient), then return "-1".
This field defaults to 0; if non-zero, nbdkit can reliably use the value of "errno" when a callback reports failure, rather than the plugin having to call "nbdkit_set_error".
When nbdkit receives certain signals it will shut down (see "SIGNALS" in nbdkit(1)). The server will wait for any currently running plugin callbacks to finish and also call the ".unload" callback before unloading the plugin.
Note that it's not guaranteed this can always happen (eg. the server might be killed by "SIGKILL" or segfault).
Plugins and filters can call exit(3) in the configuration phase (before and including ".get_ready", but not in connected callbacks).
Once nbdkit has started serving connections, plugins and filters should not call exit(3). However they may instruct nbdkit to shut down by calling "nbdkit_shutdown":
void nbdkit_shutdown (void);
This function requests an asynchronous shutdown and returns (note that it does not exit the process immediately). It ensures that the plugin and all filters are unloaded cleanly which may take some time. Further callbacks from nbdkit into the plugin or filter may occur after you have called this.
There are several functions for parsing numbers. These all deal correctly with overflow, out of range and parse errors, and you should use them instead of unsafe functions like sscanf(3), atoi(3) and similar.
int nbdkit_parse_int (const char *what, const char *str, int *r);
int nbdkit_parse_unsigned (const char *what,
const char *str, unsigned *r);
int nbdkit_parse_int8_t (const char *what,
const char *str, int8_t *r);
int nbdkit_parse_uint8_t (const char *what,
const char *str, uint8_t *r);
int nbdkit_parse_int16_t (const char *what,
const char *str, int16_t *r);
int nbdkit_parse_uint16_t (const char *what,
const char *str, uint16_t *r);
int nbdkit_parse_int32_t (const char *what,
const char *str, int32_t *r);
int nbdkit_parse_uint32_t (const char *what,
const char *str, uint32_t *r);
int nbdkit_parse_int64_t (const char *what,
const char *str, int64_t *r);
int nbdkit_parse_uint64_t (const char *what,
const char *str, uint64_t *r);
Parse string "str" into an integer of various types. These functions parse a decimal, hexadecimal ("0x...") or octal ("0...") number.
On success the functions return 0 and set *r to the parsed value (unless "*r == NULL" in which case the result is discarded). On error, "nbdkit_error" is called and the functions return "-1". On error *r is always unchanged.
The "what" parameter is printed in error messages to provide context. It should usually be a short descriptive string of what you are trying to parse, eg:
if (nbdkit_parse_int ("random seed", argv[1], &seed) == -1)
return -1;
might print an error:
random seed: could not parse number: "lalala"
Use the "nbdkit_parse_size" utility function to parse human-readable size strings such as "100M" into the size in bytes.
int64_t nbdkit_parse_size (const char *str);
"str" can be a string in a number of common formats. The function returns the size in bytes. If there was an error, it returns "-1".
Use the "nbdkit_parse_bool" utility function to parse human-readable strings such as "on" into a boolean value.
int nbdkit_parse_bool (const char *str);
"str" can be a string containing a case-insensitive form of various common toggle values. The function returns 0 or 1 if the parse was successful. If there was an error, it returns "-1".
The "nbdkit_read_password" utility function can be used to read passwords from config parameters:
int nbdkit_read_password (const char *value, char **password);
For example:
char *password = NULL;
static int
myplugin_config (const char *key, const char *value)
{
..
if (strcmp (key, "password") == 0) {
free (password);
if (nbdkit_read_password (value, &password) == -1)
return -1;
}
..
}
The "password" result string is allocated by malloc, and so you may need to free it.
This function recognizes several password formats. A password may be used directly on the command line, eg:
nbdkit myplugin password=mostsecret
But more securely this function can also read a password interactively:
nbdkit myplugin password=-
or from a file:
nbdkit myplugin password=+/tmp/secret
or from a file descriptor inherited by nbdkit:
nbdkit myplugin password=-99
Notes on reading passwords
If the password begins with a "-" or "+" character then it must be passed in a file.
"password=-" can only be used when stdin is a terminal.
"password=-FD" cannot be used with stdin, stdout or stderr (ie. "-0", "-1" or "-2"). The reason is that after reading the password the file descriptor is closed, which causes bad stuff to happen.
int nbdkit_stdio_safe (void);
The "nbdkit_stdio_safe" utility function returns 1 if it is safe to interact with stdin and stdout during the configuration phase, and 0 otherwise. This is because when the nbdkit -s option is used the plugin must not directly interact with stdin, because that would interfere with the client.
The result of this function only matters in callbacks up to ".config_complete". Once nbdkit reaches ".get_ready", the plugin should assume that nbdkit may have closed the original stdin and stdout in order to become a daemon.
nbdkit-sh-plugin(3) uses this function to determine whether it is safe to support "script=-" to read a script from stdin. Also constructs like "password=-" (see "Reading passwords" above) are disabled when reading from stdio is not safe.
The server usually (not always) changes directory to "/" before it starts serving connections. This means that any relative paths passed during configuration will not work when the server is running (example: "nbdkit plugin.so disk.img").
To avoid problems, prepend relative paths with the current directory before storing them in the handle. Or open files and store the file descriptor.
char *nbdkit_absolute_path (const char *filename);
The utility function "nbdkit_absolute_path" converts any path to an absolute path: if it is relative, then all this function does is prepend the current working directory to the path, with no extra checks.
Note that this function works only when used in the ".config", ".config_complete" and ".get_ready" callbacks.
If conversion was not possible, this calls "nbdkit_error" and returns "NULL". Note that this function does not check that the file exists.
The returned string must be freed by the caller.
char *nbdkit_realpath (const char *filename);
The utility function "nbdkit_realpath" converts any path to an absolute path, resolving symlinks. Under the hood it uses the "realpath" function, and thus it fails if the path does not exist, or it is not possible to access to any of the components of the path.
Note that this function works only when used in the ".config", ".config_complete" and ".get_ready" callbacks.
If the path resolution was not possible, this calls "nbdkit_error" and returns "NULL".
The returned string must be freed by the caller.
All plugins will see a umask(2) of 0022.
A plugin that needs to sleep may call sleep(2), nanosleep(2) and similar. However that can cause nbdkit to delay excessively when shutting down (since it must wait for any plugin or filter which is sleeping). To avoid this there is a special wrapper around nanosleep which plugins and filters should use instead.
int nbdkit_nanosleep (unsigned sec, unsigned nsec);
The utility function "nbdkit_nanosleep" suspends the current thread, and returns 0 if it slept at least as many seconds and nanoseconds as requested, or -1 after calling "nbdkit_error" if there is no point in continuing the current command. Attempts to sleep more than "INT_MAX" seconds are treated as an error.
If the client negotiated an NBD export name with nbdkit then plugins may read this from any connected callbacks. Nbdkit's normal behaviour is to accept any export name passed by the client, log it in debug output, but otherwise ignore it. By using "nbdkit_export_name" plugins may choose to filter by export name or serve different content.
const char *nbdkit_export_name (void);
Return the optional NBD export name if one was negotiated with the current client (this uses thread-local magic so no parameter is required). The returned string is valid at least through the ".close" of the current connection, but if you need to store it in the plugin for use by more than one client you must copy it.
The export name is a free-form text string, it is not necessarily a path or filename and it does not need to begin with a '/' character. The NBD protocol describes the empty string ("") as a representing a "default export" or to be used in cases where the export name does not make sense. The export name is untrusted client data, be cautious when parsing it.
On error, "nbdkit_error" is called and the call returns "NULL".
Some callbacks are specified to return "const char *", even when a plugin may not have a suitable compile-time constant to return. Returning dynamically-allocated memory for such a callback would induce a memory leak or otherwise complicate the plugin to perform additional bookkeeping. For these cases, nbdkit provides several convenience functions for creating a copy of a string for better lifetime management.
const char *nbdkit_strdup_intern (const char *str); const char *nbdkit_strndup_intern (const char *str, size_t n);
Returns a copy of "str", possibly limited to a maximum of "n" bytes, so that the caller may reclaim str and use the copy in its place. If the copy is created outside the scope of a connection (such as during ".load" or ".config"), the lifetime of the copy will last at least through ".unload". If the copy is created after a client has triggered a connection (such as during ".preconnect" or ".open"), the lifetime will last at least through ".close", but the copy is not safe to share with other connections.
On error, "nbdkit_error" is called and the call returns "NULL".
const char *nbdkit_printf_intern (const char *fmt, ...); const char *nbdkit_vprintf_intern (const char *fmt, va_list ap);
Return a string created from a format template, with a lifetime longer than the current connection. Shorthand for passing "fmt" to asprintf(3) on a temporary string, then passing that result to "nbdkit_strdup_intern".
On error, "nbdkit_error" is called and the call returns "NULL".
A server may use "nbdkit_is_tls" to limit which export names work until after a client has completed TLS authentication. See nbdkit-tls(1). It is also possible to use nbdkit-tls-fallback-filter(1) to automatically ensure that the plugin is only used with authentication.
int nbdkit_is_tls (void);
Return true if the client has completed TLS authentication, or false if the connection is still plaintext.
On error (such as calling this function outside of the context of ".open"), "nbdkit_error" is called and the call returns "-1".
It is possible to get the source address of the client when you are running in any connected callback.
int nbdkit_peer_name (struct sockaddr *addr, socklen_t *addrlen);
Return the peer (client) address, if available. The "addr" and "addrlen" parameters behave like getpeername(2). In particular you must initialize "addrlen" with the size of the buffer pointed to by "addr", and if "addr" is not large enough then the address will be truncated.
In some cases this is not available or the address returned will be meaningless (eg. if there is a proxy between the client and nbdkit). This call uses thread-local magic so no parameter is required to specify the current connection.
On success this returns 0. On error, "nbdkit_error" is called and this call returns "-1".
(nbdkit ≥ 1.24, Linux only)
int64_t nbdkit_peer_pid (void);
Return the peer process ID. This is only available when the client connected over a Unix domain socket.
On success this returns the peer process ID. On error, "nbdkit_error" is called and this call returns "-1".
(nbdkit ≥ 1.24)
int64_t nbdkit_peer_uid (void);
Return the peer user ID. This is only available when the client connected over a Unix domain socket.
On success this returns the user ID. On error, "nbdkit_error" is called and this call returns "-1".
(nbdkit ≥ 1.24)
int64_t nbdkit_peer_gid (void);
Return the peer group ID. This is only available when the client connected over a Unix domain socket.
On success this returns the user ID. On error, "nbdkit_error" is called and this call returns "-1".
Run the server with -f and -v options so it doesn't fork and you can see debugging information:
nbdkit -fv ./myplugin.so [key=value [key=value [...]]]
To print debugging information from within the plugin, call "nbdkit_debug", which has the following prototype and works like printf(3):
void nbdkit_debug (const char *fs, ...); void nbdkit_vdebug (const char *fs, va_list args);
For convenience, "nbdkit_debug" preserves the value of "errno", and also supports the glibc extension of a single %m in a format string expanding to "strerror(errno)", even on platforms that don't support that natively. Note that "nbdkit_debug" only prints things when the server is in verbose mode (-v option).
The -v option switches general debugging on or off, and this debugging should be used for messages which are useful for all users of your plugin.
In cases where you want to enable specific extra debugging to track down bugs in plugins or filters — mainly for use by the plugin/filter developers themselves — you can define Debug Flags. These are global ints called "myplugin_debug_*":
int myplugin_debug_foo;
int myplugin_debug_bar;
...
if (myplugin_debug_foo) {
nbdkit_debug ("lots of extra debugging about foo: ...");
}
Debug Flags can be controlled on the command line using the -D (or --debug) option:
nbdkit -f -v -D myplugin.foo=1 -D myplugin.bar=2 myplugin [...]
Note "myplugin" is the name passed to ".name" in the "struct nbdkit_plugin".
You should only use this feature for debug settings. For general settings use ordinary plugin parameters. Debug Flags can only be C ints. They are not supported by non-C language plugins.
For convenience '.' characters are replaced with '_' characters in the variable name, so both of these parameters:
-D myplugin.foo_bar=1 -D myplugin.foo.bar=1
correspond to the plugin variable "myplugin_debug_foo_bar".
Plugins should be compiled as shared libraries. There are various ways to achieve this, but most Linux compilers support a -shared option to create the shared library directly, for example:
gcc -fPIC -shared myplugin.c -o myplugin.so
Note that the shared library will have undefined symbols for functions that you call like "nbdkit_parse_int" or "nbdkit_error". These will be resolved by the server binary when nbdkit dlopens the plugin.
nbdkit provides a pkg-config/pkgconf file called "nbdkit.pc" which should be installed on the correct path when the nbdkit plugin development environment is installed. You can use this in autoconf configure.ac scripts to test for the development environment:
PKG_CHECK_MODULES([NBDKIT], [nbdkit >= 1.2.3])
The above will fail unless nbdkit ≥ 1.2.3 and the header file is installed, and will set "NBDKIT_CFLAGS" and "NBDKIT_LIBS" appropriately for compiling plugins.
You can also run pkg-config/pkgconf directly, for example:
if ! pkg-config nbdkit --exists; then echo "you must install the nbdkit plugin development environment" exit 1 fi
You can also substitute the plugindir variable by doing:
PKG_CHECK_VAR([NBDKIT_PLUGINDIR], [nbdkit], [plugindir])
which defines "$(NBDKIT_PLUGINDIR)" in automake-generated Makefiles.
If nbdkit development headers are installed in a non-standard location then you may need to compile plugins using:
gcc -fPIC -shared myplugin.c -o myplugin.so \ `pkg-config nbdkit --cflags --libs`
The plugin is a "*.so" file and possibly a manual page. You can of course install the plugin "*.so" file wherever you want, and users will be able to use it by running:
nbdkit /path/to/plugin.so [args]
However if the shared library has a name of the form "nbdkit-name-plugin.so" and if the library is installed in the $plugindir directory, then users can be run it by only typing:
nbdkit name [args]
The location of the $plugindir directory is set when nbdkit is compiled and can be found by doing:
nbdkit --dump-config
If using the pkg-config/pkgconf system then you can also find the plugin directory at compile time by doing:
pkg-config nbdkit --variable=plugindir
You can also write nbdkit plugins in Go, Lua, OCaml, Perl, Python, Ruby, Rust, shell script or Tcl. Other programming languages may be offered in future.
For more information see: nbdkit-cc-plugin(3), nbdkit-golang-plugin(3), nbdkit-lua-plugin(3), nbdkit-ocaml-plugin(3), nbdkit-perl-plugin(3), nbdkit-python-plugin(3), nbdkit-ruby-plugin(3), nbdkit-rust-plugin(3), nbdkit-sh-plugin(3), nbdkit-tcl-plugin(3) .
Plugins written in scripting languages may also be installed in $plugindir. These must be called "nbdkit-name-plugin" without any extension. They must be executable, and they must use the shebang header (see "Shebang scripts" in nbdkit(1)). For example a plugin written in Perl called "foo.pl" might be installed like this:
$ head -1 foo.pl #!/usr/sbin/nbdkit perl $ sudo install -m 0755 foo.pl $plugindir/nbdkit-foo-plugin
and then users will be able to run it like this:
$ nbdkit foo [args ...]
nbdkit(1), nbdkit-nozero-filter(1), nbdkit-tls-fallback-filter(1), nbdkit-filter(3).
Standard plugins provided by nbdkit:
nbdkit-cdi-plugin(1), nbdkit-curl-plugin(1), nbdkit-data-plugin(1), nbdkit-eval-plugin(1), nbdkit-example1-plugin(1), nbdkit-example2-plugin(1), nbdkit-example3-plugin(1), nbdkit-example4-plugin(1), nbdkit-file-plugin(1), nbdkit-floppy-plugin(1), nbdkit-full-plugin(1), nbdkit-guestfs-plugin(1), nbdkit-gzip-plugin(1), nbdkit-info-plugin(1), nbdkit-iso-plugin(1), nbdkit-libvirt-plugin(1), nbdkit-linuxdisk-plugin(1), nbdkit-memory-plugin(1), nbdkit-nbd-plugin(1), nbdkit-null-plugin(1), nbdkit-ondemand-plugin(1), nbdkit-partitioning-plugin(1), nbdkit-pattern-plugin(1), nbdkit-random-plugin(1), nbdkit-S3-plugin(1), nbdkit-sparse-random-plugin(1), nbdkit-split-plugin(1), nbdkit-ssh-plugin(1), nbdkit-streaming-plugin(1), nbdkit-tar-plugin(1), nbdkit-tmpdisk-plugin(1), nbdkit-torrent-plugin(1), nbdkit-vddk-plugin(1), nbdkit-zero-plugin(1) ; nbdkit-cc-plugin(3), nbdkit-golang-plugin(3), nbdkit-lua-plugin(3), nbdkit-ocaml-plugin(3), nbdkit-perl-plugin(3), nbdkit-python-plugin(3), nbdkit-ruby-plugin(3), nbdkit-rust-plugin(3), nbdkit-sh-plugin(3), nbdkit-tcl-plugin(3) .
Eric Blake
Richard W.M. Jones
Pino Toscano
Copyright (C) 2013-2020 Red Hat Inc.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
THIS SOFTWARE IS PROVIDED BY RED HAT AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL RED HAT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
| 2021-01-20 | nbdkit-1.24.1 |